Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!
Yo, so me and my friend built a sick setup, with a really good drop i. Then we go to hit it and the rail (i built it in a welding class) is too soft so we catch.
Any ideas on how to ad to the rail and fix it?
Thanks
your edges are too sharp and the rail is probably aluminum.
the only solution is to literally file down your edges so they are completly dull.
well there shouldnt be a problem if its steel and dont file down the rail that will only speed up the process of the metal rusting
what you could do i wax it
now when i waxed mine i took a candle rubbed it on and then dripped it on as well using a heat gun then i heated up the wax on the rail till it was liquid which doesnt take long and then used a old credit card and started from one end and scrapped down towards the other end Now be careful because the credit card will melt easily if your using a heat gun and the heat is blown onto the card
hope that helps
