POST A PIC OF YOUR DROP IN

Posts: 1827 - Karma: 1,195

Karma: 1,195

Posts: 1827

Insane

Working on it in sketchup, I think it's coming along quite well:

The curved part will be plywood that will be bent and drilled into place. Green = turf, brown = plywood, white = 2 x 4s. (Underneath all the green is brown, the plywood will be covered with turf)

Aug 7 2009 1:33AM

0 0

DangerToes

Posts: 1042 - Karma: 33

Karma: 33

Posts: 1042

Insane

I must say that it's cool you can do cad drawings. however, this is a drop-in we're talking about, and its a lot cheaper if you just go off of what you can find for free, rather than spend money to make a real pretty one. See that monster in the post above yours? I bought a sheet of plywood and some nails for that whole thing. Total cost, $18. My drop is 12 feet tall, and if I prep it right, we can hit a quarterpipe. Rock the free section on craigslist and don't overthink it, because let's face it, it's a drop-in, it doesn't need to pass OSHA standards and it can be done with far less than you'd think. That's just my opinion on the matter though.

Aug 7 2009 2:40AM

0 0

traylortrash

Posts: 1935 - Karma: 2,450

Karma: 2,450

Posts: 1935

Insane

probly gonna post a pic in the rail thread too... this is our only pic for now, its 6 1/2 feet high, adjustable to some extent, and can be completely dissassembled and stored. also gives you plenty of speed depending on how you set it up...

Aug 7 2009 3:46AM

0 0

B.Mohn

Posts: 17 - Karma: 43

Karma: 43

Posts: 17

Newb

Cost only 20$ to make

Aug 7 2009 10:49AM

0 0

Posts: 1827 - Karma: 1,195

Karma: 1,195

Posts: 1827

Insane

Yeah but I've got $160 saved up from doing random work, so I want to build this the best I possibly can so that I never have to rebuild it. If I do it right, I'll just have to do little tune ups every now and again, and I'll never have to worry about it falling apart or breaking. I figure it's worth the extra money and time if it will last me like 6 summers, you know?

Aug 7 2009 11:49AM

0 0

I_Am_Mod

Posts: 13214 - Karma: 3,753

Karma: 3,753

Posts: 13214

Crazy Fool

i predict this wont work very good...

but its a start and with a bit more work you'd be settled.....

Aug 7 2009 1:23PM

0 0

HCskrilla

Posts: 37 - Karma: 17

Karma: 17

Posts: 37

Lame

Aug 7 2009 1:53PM

0 0

Posts: 1015 - Karma: 819

Karma: 819

Posts: 1015

Insane

you will need construction fence to make this work and lots of soap

Aug 7 2009 8:36PM

0 0

Posts: 1610 - Karma: 355

Karma: 355

Posts: 1610

Insane

Still assemble the tower

Cost = $20

Aug 8 2009 2:15PM

0 0

B-runge

Posts: 16558 - Karma: 360

Karma: 360

Posts: 16558

Post Whore

its obvious you should use the shed as a platform

Aug 9 2009 1:59AM

0 0

mattridesskis

Posts: 635 - Karma: 16

Karma: 16

Posts: 635

Ridiculous

it would collapse.

Aug 9 2009 3:28PM

0 0

B-runge

Posts: 16558 - Karma: 360

Karma: 360

Posts: 16558

Post Whore

its obvious your shed sucks donkey balls then.....

Aug 9 2009 3:30PM

0 0

B.Mohn

Posts: 17 - Karma: 43

Karma: 43

Posts: 17

Newb

the drops really short so i only use water and it works fine

Aug 9 2009 6:58PM

0 0

Posts: 1610 - Karma: 355

Karma: 355

Posts: 1610

Insane

its plastic so yep

Aug 9 2009 8:21PM

0 0

Lanceasaurus

Posts: 925 - Karma: 109

Karma: 109

Posts: 925

Insane

This is how ours turned out:

The rail ended up as at 10 feet, I know short but I have no experiance with rails at all. Atleast since Febuary when I was competing in slopestyle I tried to through a rail into my run... Landed on my gut and knocked the wind out of me. So I have already fell on it 2 times pretty harsh. The rail is about 16 inches off the ground slightly higher than the lip. It took us 3 days to build. If you check my profile you can see all the steps we took. Heres my friend Patrick Foster AKA P-fo hitting our rail:

We got this thing perfect there are no flaws except later on we will need a rail around 5ft longer and some of that orange construction tape!

Aug 10 2009 2:39AM

1 0

Posts: 1827 - Karma: 1,195

Karma: 1,195

Posts: 1827

Insane

Finished with the design! Will start building when I get back from vacation.

Aug 11 2009 1:13PM

1 0

n8myton

Posts: 395 - Karma: 24

Karma: 24

Posts: 395

Loner

you going to want to put some diagonals onto the tower part of that.

Aug 11 2009 4:36PM

1 0

El_Barto.

Posts: 11630 - Karma: 24,465

Karma: 24,465

Posts: 11630

Crazy Fool

Aug 11 2009 9:13PM

0 0

Posts: 1610 - Karma: 355

Karma: 355

Posts: 1610

Insane

Nice man, how tall?

Aug 11 2009 9:15PM

0 0

Posts: 1827 - Karma: 1,195

Karma: 1,195

Posts: 1827

Insane

ik

Aug 11 2009 9:16PM

0 0

El_Barto.

Posts: 11630 - Karma: 24,465

Karma: 24,465

Posts: 11630

Crazy Fool

its about 5.5 and the ramp comes in around 37 degrees i think. i dont remember my specs on the tranny or kicker. shit works about as good as i could have ever hoped and the kicker is big enough to get a clean 5 off of with no rail

Aug 11 2009 9:21PM

0 0

Posts: 1610 - Karma: 355

Karma: 355

Posts: 1610

Insane

Sound prime. Have fun.

Aug 12 2009 9:53AM

0 0

Yung_Gnarley

Posts: 9091 - Karma: 3,016

Karma: 3,016

Posts: 9091

Crazy Fool

Aug 12 2009 1:36PM

0 0

C.Wood

Posts: 2524 - Karma: 180

Karma: 180

Posts: 2524

Addict

that is so nice

Aug 12 2009 7:34PM

0 0

Robby.

Posts: 693 - Karma: 23

Karma: 23

Posts: 693

Ridiculous

Aug 18 2009 1:05AM

0 0

DangerToes

Posts: 1042 - Karma: 33

Karma: 33

Posts: 1042

Insane

Mother was being a ninja today and caught me jibbing in clothes that fit (sigh)

Aug 18 2009 1:16AM

1 0

Whifazoo

Posts: 737 - Karma: 132

Karma: 132

Posts: 737

Ridiculous

okay so my setup was pre sketchy but worked well, so for fall and the last bit of summer i was looking to update it so i made these on autodesk 3ds max, tell me what u think i should change(btw the white stuff is box top sheet strips that i found chillin at pano

Aug 19 2009 7:21PM

0 0

Posts: 1015 - Karma: 819

Karma: 819

Posts: 1015

Insane

that would be the coolest setup yet you just have to build it hhaha

Aug 19 2009 9:07PM

0 0

Sierra_P3

Posts: 19 - Karma: 40

Karma: 40

Posts: 19

Newb

Aug 19 2009 11:27PM

0 0

Posts: 1015 - Karma: 819

Karma: 819

Posts: 1015

Insane

how mush did that cost you??
looks good and expensive

Aug 20 2009 12:25AM

0 0

twin-tip-hero

Posts: 2896 - Karma: 277

Karma: 277

Posts: 2896

Addict

built

built it all myself. took about 4 or 5 days with on and off work. and the ramp comes off for easy transportation.

Aug 20 2009 5:53PM

0 0

Lanceasaurus

Posts: 925 - Karma: 109

Karma: 109

Posts: 925

Insane

Im confused is that for winter? its really steep too how high is it?

Aug 20 2009 9:59PM

0 0

Posts: 331 - Karma: 24

Karma: 24

Posts: 331

Loner

Panoramic of my setup

Aug 20 2009 11:55PM

0 0

C.Wood

Posts: 2524 - Karma: 180

Karma: 180

Posts: 2524

Addict

if that is for summer you are gonna kill yourself unless you get a transition in there
that is so steep man

Aug 21 2009 1:27PM

0 0

Posts: 331 - Karma: 24

Karma: 24

Posts: 331

Loner

^^ I look at his and and just wonder if he actually thinks that will work with out a tranny, I hope I am wrong and he is building one

Aug 21 2009 1:34PM

0 0

Posts: 1015 - Karma: 819

Karma: 819

Posts: 1015

Insane

^ a snow tranny would be perfect

Aug 21 2009 3:09PM

0 0

Posts: 331 - Karma: 24

Karma: 24

Posts: 331

Loner

^ jea how do u guys like my setup

Aug 21 2009 3:51PM

0 0

Whifazoo

Posts: 737 - Karma: 132

Karma: 132

Posts: 737

Ridiculous

thats sick man , yo how long is your rail and how fast do u go thatt is fucking tall

Aug 21 2009 5:11PM

0 0