Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Edge problems

profile picture
truckerhucker
Posts: 656 - Karma: 31

hey i just found out i broke an edge on my scratch sprayer bcs right underfoot should i jut rip it off its cut on both sides of the break like cut-----------a section of about 3 inches and another -------cut  should i just pull that section out?

Dec 10 2008 8:38PM
0 0
profile picture
OMGWTFBBQ
Posts: 954 - Karma: 208
NONONON
leave it alone
let it fall out on its own
i did more damage doin what u were about to do
Dec 10 2008 8:41PM
0 0
profile picture
Pippin
Posts: 4846 - Karma: 661
hey i also had some edge problems:

Click for larger image
Click for larger image


Dec 10 2008 8:50PM
0 0
profile picture
Eastcoastskier09
Posts: 197 - Karma: 8
Bring it to a shop and have them look at it first
Dec 10 2008 9:10PM
0 0
profile picture
.SimonB.
Posts: 1959 - Karma: 713
dont mess with it you will do more damage to the ski than you can fix
Dec 10 2008 9:12PM
0 0
profile picture
pmills
Posts: 7162 - Karma: 59
am i blind or something, i don't see the problem.
Dec 10 2008 9:14PM
0 0
profile picture
Silence
Posts: 16030 - Karma: 149
That needs to be attended to by someone that knows how to perform base work

Simply speaking it is likely that they will cut the broken edge out and epoxy a section in its place
I doubt you have the right equipment to do it, and it also depends if you have worked with epoxy before

Dec 10 2008 9:16PM
0 0
profile picture
BigJew
Posts: 6974 - Karma: 79
Don't do anything. If you're sliding rails your edges will fall out. There's nothing you can do about it.
Dec 10 2008 9:17PM
0 0
profile picture
inactive
Posts: 4772 - Karma: 97
lalalalalalalalalalalalallalalalala i cant here you
Dec 10 2008 9:19PM
0 0
profile picture
valentine*
Posts: 47 - Karma: 196
on my rossi scratch fs
i know i caught a screw on a box first day and completly tore the base out, the edge litterally went into the base and it was nasty
the wall was stilll good
if your wall is still good, a repair shop should be able to just cut the section of the edge off and screw in a new one
i know my edge got screwed into like they put a new patch of base and everything
they held up sick for end of season and into this season
but i just broke them even more
thank god i just got a new pair;)
good luck with your skis
Dec 10 2008 9:22PM
0 0
profile picture
truckerhucker
Posts: 656 - Karma: 31

i cut it out and p-texed it hopefully theyll last until next season

Dec 10 2008 9:26PM
0 0
profile picture
Jordan
Posts: 4079 - Karma: 2,122
I can hear him, I don't know where he is though. Sorry I couldn't help.
Dec 10 2008 9:29PM
0 0
profile picture
schwab
Posts: 461 - Karma: 232
this happened to my skis two weeks into the season.Click for larger image
Dec 10 2008 11:27PM
0 0
profile picture
Pippin
Posts: 4846 - Karma: 661
It would be the edge sticking out of my ski,, thus blowing out the edge
Dec 10 2008 11:56PM
0 0
profile picture
pmills
Posts: 7162 - Karma: 59
i think they're suppose to do that -- it happens so your skis don't break
Dec 11 2008 12:46AM
0 0
All times are Eastern (-4)