Red Bull Unrailistic | LIVE Broadcast

Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

I hate stupid people

profile picture
Pee_and_Ski
Posts: 1869 - Karma: 57

so i dropped my new/used AR6's off at my local shop on monday to get remounted, I told the guy to center the bindings, I was running late today so I picked them up payed and left them in my car when i was at work. I get home and look at them, the idiot at the shop didnt do anything , they slid the heal peace back and waxed them, I paied thirty bucks for shit I could of done!

im probabaly overreacting but too bad

Nov 6 2008 10:28PM
0 0
profile picture
[~_~]
Posts: 20239 - Karma: 1,273
That's no overreaction. I think a flaming bag of ass-molasses on his doorstep is in order.
Nov 6 2008 10:34PM
0 0
profile picture
SteezeNutz
Posts: 293 - Karma: 10
hahahahahahahhahaha. im sorry man. thats happened to me twice!! just go back and be like... listen little man, im gonna stomp yard all over your ballsack if you dont fix this. I promise, they will kiss your ass free of charge
Nov 6 2008 10:34PM
0 0
profile picture
hank_hill
Posts: 1273 - Karma: 217
thats shitty
Nov 6 2008 10:37PM
0 0
profile picture
hellomynameisjef
Posts: 5794 - Karma: 167
greatt idea
Nov 6 2008 10:40PM
0 0
profile picture
Pee_and_Ski
Posts: 1869 - Karma: 57

ahah im honstly considering it

Nov 6 2008 10:47PM
0 0
profile picture
telewookie420
Posts: 127 - Karma: 7
LEARN TO DO IT YOURSELF AND STOP BEING A FLAMING PUSSY
Nov 7 2008 5:34PM
0 0
profile picture
AndrewZ
Posts: 759 - Karma: 36
You're an idiot....

But to the op, that sucks and you definitely go back and have them do it right.
Nov 7 2008 5:45PM
0 0
profile picture
Holte
Posts: 10730 - Karma: 7,744
There's something to be said for forking over 20 bucks for the drill bits and doing it yourself (as long as you have somebody to teach you the first couple times).
Nov 7 2008 5:57PM
0 0
profile picture
FUUUCK
Posts: 18426 - Karma: 4,888
binding adjust and a wax for $30 is pretty fair in these parts
Nov 7 2008 6:26PM
0 0
profile picture
yewwwwwww
Posts: 182 - Karma: 46
i don't think its the $20 drill bit but the few hundred dollar jig thats stopping him
Nov 7 2008 6:26PM
0 0
profile picture
telewookie420
Posts: 127 - Karma: 7
SUCK MY JIG!
Nov 7 2008 6:43PM
0 0
profile picture
snazzyBizzle
Posts: 65 - Karma: 137
wtf
Nov 7 2008 6:44PM
0 0
profile picture
Holte
Posts: 10730 - Karma: 7,744
Nah, all you need is a measuring tape, a sharpie, and some masking tape to put on your topsheet so you can draw where the drill holes should be. It takes an extra 20 mins of measuring and triple checking your measurements, but it's not that much harder to mount skis without a jig.

Once again though, don't try to mount your own skis without having somebody show you how first. It's not THAT simple either the first couple times.
Nov 7 2008 6:53PM
0 0
profile picture
yewwwwwww
Posts: 182 - Karma: 46
thats just goin to buy you trouble. no doubt it could be done, but the chances of some pimple face tech fucking up using a jig is smaller than doin it yourself without a jig.
Nov 7 2008 6:57PM
0 0
profile picture
nickharris
Posts: 88 - Karma: 25
thas sucks
Nov 8 2008 12:09AM
0 0
profile picture
patrickstar
Posts: 486 - Karma: 20
take em back and tell them to do it again
Nov 8 2008 8:43AM
0 0
profile picture
cooterjackson
Posts: 40 - Karma: 10

i too belive your a flaming pussy, do it yourself its not rocket science and it really doesnt matter if you fuck it up

Nov 8 2008 3:08PM
0 0
profile picture
sdfjklioeur
Posts: 2082 - Karma: 114
ive fucked skis up like that though.

can you say crooked toepiece
Nov 8 2008 3:15PM
0 0
profile picture
BigMeech621
Posts: 1257 - Karma: 16
i believe that you two are fuckin dbags.  none of u prolly have event he first clue.  and you know wat u two assholes have in common? you both go in other peoples threads and talk shit with under 100 posts and karma. get a life dick head.
Nov 8 2008 4:52PM
0 0
profile picture
marc_sncl
Posts: 612 - Karma: 16
seriously.
Nov 8 2008 5:09PM
0 0
profile picture
cooterjackson
Posts: 40 - Karma: 10
well in real life i have been skiing longer than you have been alive and think kids these days are fucking worthless flaming shitbags but what do i know
Nov 8 2008 6:47PM
0 0
profile picture
telewookie420
Posts: 127 - Karma: 7
WOOT WOOT...OMG MY KARMA IS LESS THAN 100 THAT MEANS I HAVE NO IDEA WHAT I'M TALKING ABOUT.......................................
Nov 8 2008 6:52PM
0 0
profile picture
griffon
Posts: 167 - Karma: 15
If you have any practical sense, just do it yourself. I just tried it and it worked fine. If not go to the shop and complain, they will fix it
Nov 8 2008 6:58PM
0 0
profile picture
summersover
Posts: 5777 - Karma: 233
hahaha it really doesn't matter if you fuck it up eh?
i guess it doesnt matter after you drop like $600 on skis and get crooked bindings...no problem
Nov 8 2008 7:04PM
0 0
profile picture
cooterjackson
Posts: 40 - Karma: 10
shit happens, crooked bindings, holes in skis, forward mounts,  doesnt matter, deal with it
Nov 8 2008 7:10PM
0 0
profile picture
J.D.
Posts: 21362 - Karma: 5,141
Holy shit are people actually saying it's a good idea to mount your own bindings? No, that's a terrible idea. Get a shop to do it. Get a piece of masking tape first, put it on your skis, and draw a line with a sharpie where you want your midsole to be. Then it's almost guaranteed they'll do it right.
Nov 8 2008 7:20PM
0 0
profile picture
BigMeech621
Posts: 1257 - Karma: 16
my point exactly.
Nov 9 2008 12:46AM
0 0
profile picture
timmi
Posts: 12874 - Karma: 3,460
i got my skis remounted. paid and when i took my bindings off the next year there was only 1 set of holes. i forget why i got them remounted...
Nov 9 2008 1:01AM
0 0
profile picture
Funnel
Posts: 7808 - Karma: 1,414
Demand a refund and remount.
Nov 9 2008 2:00AM
0 0
All times are Eastern (-4)