Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

A few questions.

profile picture
kyle_skis_stowe
Posts: 68 - Karma: 18
so i was planing on making a  rail like this... http://img301.imageshack.us/img301/8413/otherrailideanq6.jpg and i have all my wood and pvc pipe but, im not really were i should start screwing the wood togeteher? form the bottom, or the top? but my rail has no gap in  between the pvc .  also  how do i drill through the pvc?

this is my first rail to...

Apr 18 2008 4:25PM
0 0
profile picture
mitchk
Posts: 678 - Karma: 19
drill a hole in the top and then put the screw thruogh the bottom. then sand off the hole on top.
Apr 18 2008 5:17PM
0 0
profile picture
skiEER
Posts: 4089 - Karma: 79
Click for larger image
Apr 20 2008 7:54PM
0 0
profile picture
dandougherty
Posts: 1002 - Karma: 2,619
build the frame first, like the legs and such, then screw the PVC on through the bottom of the wood and into the bottom of pipe, if you go through the top the pipe will break eaiser at the holes
May 22 2008 9:50AM
0 0
profile picture
TheJerz
Posts: 549 - Karma: 67
put a 2x4 under them, use liquid nails on them duct tape them down tightly and sit in glue for a night. then just screw in at the ends were the openings of the pipe are, what i did and works great.
May 22 2008 8:22PM
0 0
profile picture
dandougherty
Posts: 1002 - Karma: 2,619

damn thats a good idea, but how hard is it to change the pipes when they wear out

May 25 2008 6:00PM
0 0
All times are Eastern (-4)