Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Water in compressor

profile picture
Conshaunn16
Posts: 508 - Karma: 10
i made a tee gun today and i wanted to see if it would work. so i plugged in the hose and the compressor and it started misting! but then i took it off the water and the air. when i tryed to reconnect it to the air WITHOUT the water connected i got blasted in the face by water from my compressor line.. whats wrong? also how do you set your psi at one thing i have a craftsman compressor and am unsure. thanks for the help all.
Oct 24 2007 8:17PM
0 0
profile picture
papasteeze
Posts: 12055 - Karma: 911
compressors produce a lot of water, when was the last time you drained the compressor tank? There should be a relief valve on the bottom of the tank.
Oct 26 2007 3:51PM
0 0
profile picture
tribefan226
Posts: 2122 - Karma: 209

yeah compressor produce some water. i made an external mix snow gun and a little water will come out the air nozzle even though the air and water lines never mix

Nov 18 2007 12:31PM
0 0
profile picture
seine_Dudeheit
Posts: 2282 - Karma: 16
If there is no pressure indecator at the Compressor, you can get some Link with a indicator on it between the compressor hose and the valve of your gun. You can regulate the pressure with that thing.

(Filter Pressure Regulator)
Click for larger image
Feb 14 2008 3:39PM
0 0
profile picture
dandougherty
Posts: 1002 - Karma: 2,619
make sure you drain your tank pretty often, like every time you use it, cause it could rust through the tank and cause it to explode
Nov 25 2008 3:00PM
0 0
All times are Eastern (-4)