Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
I just got my first pair of look pivots mounted to my twp and I got home and out the boot in and something seems off. Is this supposed to happen or is something wrong with the heal piece, does it need tightens, ect. Someone pls tell me.
I just got my first pair of look pivots mounted to my twp and I got home and out the boot in and something seems off. Is this supposed to happen or is something wrong with the heal piece, does it need tightens, ect. Someone pls tell me.
Sorry for the spelling errors, I was kinda in a rush
Foreword pressure might be too high. The line on the heel is a starting point, not an indicator that FP is correct. Would take back and tell them you think FP is set too high.
jompcockForeword pressure might be too high. The line on the heel is a starting point, not an indicator that FP is correct. Would take back and tell them you think FP is set too high.
Adjusted the forward pressure and the din a little and it stopped, thx for the tips
ShredsaucerAdjusted the forward pressure and the din a little and it stopped, thx for the tips
The official pivot guide for techs says something like 'get the white notch to match with the line and then adjust so that you can just barely rotate the heel with a boot in the binding'. It's not an exact set of parameters like Marker which basically says to tighten until the screw is flush and pull the afd to the side and then slowly lower until it can slip back to the middle on its own.
jompcockThe official pivot guide for techs says something like 'get the white notch to match with the line and then adjust so that you can just barely rotate the heel with a boot in the binding'. It's not an exact set of parameters like Marker which basically says to tighten until the screw is flush and pull the afd to the side and then slowly lower until it can slip back to the middle on its own.
What did you change on the din?
I just tughtemsnit a little, like to 6 and they kinda just got snappier and they didn’t really move anymore. I don’t really trust it tho so I’m prob gonna take them to the shop to get checked out.
I just got my first pair of look pivots mounted to my twp and I got home and out the boot in and something seems off. Is this supposed to happen or is something wrong with the heal piece, does it need tightens, ect. Someone pls tell me.