Sounds like somebody's gonna file a lawsuit with that last sentence

cpohlSounds like somebody's gonna file a lawsuit with that last sentence

That would be my guess as well?

I'm running Hawx Ultra XTD with a 2014 Marker Griffon (on my non pow set up) should be fine on a 2016, I trust the store here with their judgement that the 2014s are fine...

Editing this after doing some more research, info on Marker Sole ID compatibility with Hawx Ultra XTD is dodgy at best...

**This post was edited on Dec 18th 2019 at 5:49:36am

Do the Griffons say Gripwalk or SoleID?

They do not

-eREKTion-Do the Griffons say Gripwalk or SoleID?

Kd2211They do not

is there an afd adjustment screw? if so, was the afd properly adjusted for gripwalk boots?

-eREKTion-is there an afd adjustment screw? if so, was the afd properly adjusted for gripwalk boots?

I believe there is an AFD / adjustable toe. It’s an Allen wrench behind the toe piece right? I cannot fit a business card or even a piece of paper under the toe piece with the ascendants clipped in.

-eREKTion-is there an afd adjustment screw? if so, was the afd properly adjusted for gripwalk boots?

This is as far as a card/ thin piece of cardboard will go.

nor can I pull out the card at all when pulling up the toe by pulling on the heel. Shouldn’t the plate move a little bit when pushing on with a screw driver?

**This post was edited on Dec 17th 2019 at 10:48:25am

The referenced post has been removed.

Someone big a big mistake! Sucks OP got injured.

Shop is telling me it passed din release with my correct ht & wt & skier type. Sounds like bs to me seeing as the 2016 griffon is pre grip walk?

mystery3Someone big a big mistake! Sucks OP got injured.

So wait did you blow your knee out ejecting from these bindings?

No I blew out my knee not ejecting from these bindings. Took them to a shop to lower the dins and they said I was lucky I didn’t break my whole leg

CatdickBojanglesSo wait did you blow your knee out ejecting from these bindings?

Kd2211No I blew out my knee not ejecting from these bindings. Took them to a shop to lower the dins and they said I was lucky I didn’t break my whole leg

Yeah those are not gw compatible bindings with a gw sole I would be raising hell with the shop.

Do you actually have the Grip Walk sole on those Ascendants though? Some Ascendants came with the flat DIN sole, some came with Grip Walk. Shop could have screwed up, for sure, but it's worth checking. Trying to jam GW soles into non GW bindings is pretty hard, you can tell something is wrong every time you put your boots on.

they are grip walk soles. 2020 ascendants only come with them pretty sure

cydwhitDo you actually have the Grip Walk sole on those Ascendants though? Some Ascendants came with the flat DIN sole, some came with Grip Walk. Shop could have screwed up, for sure, but it's worth checking. Trying to jam GW soles into non GW bindings is pretty hard, you can tell something is wrong every time you put your boots on.

Yeah I am. They’re trying to tell me they pass the din release test anyways and I’m like why tf you put them through the test in the first place

CatdickBojanglesYeah those are not gw compatible bindings with a gw sole I would be raising hell with the shop.

Gripwalk is NOT comptable with that binding, doesn’t matter if it “passes releases tests”. That’s bullshit because according to marker, the soles and the AFD don’t play together. Tell them to read up and cut the shit before someone gets hurt again

The referenced post has been removed.

this shop just sounds ultra greasy lol damn

Kd2211Yeah I am. They’re trying to tell me they pass the din release test anyways and I’m like why tf you put them through the test in the first place

Yeah there's a lot of bindings that do not have compatibility and will still pass the test (like gripwalk soles with WTR model pivots), but that doesn't mean it's legal or frees liability. The shop should've known that right away before selling them/testing them.

Ken Jones in Manchester NH. Hit them up if u tryna break a leg

DeebieSkeebiesthis shop just sounds ultra greasy lol damn

Kd2211Ken Jones in Manchester NH. Hit them up if u tryna break a leg

AHAHAHA NO WAY IT WAS KEN JONES. I work at Fire On The Mountain in Dover and ik that shop, can’t believe they passed that combo 😂😂😂

**This post was edited on Dec 26th 2019 at 2:13:31pm

On my life lol. Tell Dylan Jones he’s a clown

animatorAHAHAHA NO WAY IT WAS KEN JONES. I work at Fire On The Mountain in Dover and ik that shop, can’t believe they passed that combo 😂😂😂

**This post was edited on Dec 26th 2019 at 2:13:31pm

Kd2211On my life lol. Tell Dylan Jones he’s a clown

I’m dead 😂😂😂 that’s hilarious

Yeee lmao me and my bum knee dead too

animatorI’m dead 😂😂😂 that’s hilarious