SOLD 191 ON3P Caylors

Posts: 49 - Karma: 100

Jan 22 2018 1:55PM

SOLD

Up for sale is a pair of 11/12 191 ON3P Caylors. Dims are 148/120/140. Caylors are the precursor to the Jeffrey, which is the precursor to the Kartel.

They're well used, but the bamboo core is resilient as hell and the flex has broken in nicely. Damp and medium stiff, lots of pop. They love going fast and making big turns in 3d snow but can also pivot nicely when you need to shed speed.

They've been mounted 1x with binding freedom inserts (included) for FKS 180s (not included) at recommended (-3) for a 310 bsl boot. They can adjust 5mm down as they currently are dialed for 305mm boots, and could most likely work for 315mm boots in the same holes although I haven't tried.

Bases are absolutely bomber - yall know ON3P quality but these have stood up to a lot of use with no coreshots and only 3 minor divots to show for it. Edges have been tuned recently, with a detune through the rocker for maximum slarviness. Minor rusting which can be easily removed.

PRICE DROP Looking for $275 + shipping OBO. Located in the Bay Area, can meet in Tahoe or Mammoth for pickup.

**This thread was edited on Jan 22nd 2018 at 1:57:05pm

**This thread was edited on Jan 24th 2018 at 5:19:25pm

**This thread was edited on Jan 30th 2018 at 2:20:40pm

**This thread was edited on Oct 18th 2018 at 4:26:36pm

1 0

JohnJonsz

Posts: 317 - Karma: 871

Jan 22 2018 7:13PM

kellenmThey've been mounted 1x with binding freedom inserts (included) for FKS 180s (not included) at recommended (-3) for a 310 bsl boot. They can adjust 5mm down as they currently are dialed for 305mm boots, and could most likely work for 315mm boots in the same holes although I haven't tried.

So if I have fks 180s bindings ready to mount and a 26.5 boot that I think is 303mm, I can use your binding inserts?

If so consider me interested tho these are more pricey than I'm trying to spend on pow skis

1 0

KM_2

Posts: 49 - Karma: 100

Jan 23 2018 12:20PM

JohnJonszSo if I have fks 180s bindings ready to mount and a 26.5 boot that I think is 303mm, I can use your binding inserts?

If so consider me interested tho these are more pricey than I'm trying to spend on pow skis

FKS have ~10mm of adjustment range in the arms. They were mounted in the middle of that range so they can go +/- 5mm from 310, and they're currently at the lowest they can go at 305. I will double check tonight to see if they are able to go a few mm shorter. What boots do you have? Would be worth double checking that they're 303.

These also only have 1 set of holes in them, so plenty of room to mount a a cm or so back if the holes don't fit.

**This post was edited on Jan 23rd 2018 at 12:20:22pm

**This post was edited on Jan 23rd 2018 at 1:08:53pm

1 0

JohnJonsz

Posts: 317 - Karma: 871

Jan 23 2018 7:49PM

Bump thanks but this won’t work for me

1 0

Hans_Gruber

Posts: 10 - Karma: 16

Jan 24 2018 10:21AM

$150?

1 0

KM_2

Posts: 49 - Karma: 100

Jan 24 2018 5:18PM

Hans_Gruber$150?

Too low, sent you a message

1 0