Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
Built a boot/glove dryer out of pvc pipe and a duct fan. Almost broke my wrist using the hole saw to put the holes in the main pipe but I figured out of a system. Have it set up with a timer so it runs long enough to dry everything out and not run longer than it needs to. Incredibly simple to make and way cheaper than an off the shelf boot dryer if you need to be able to dry the gear of 20 people at a time.
Just make sure to either put holes in the sides of the smaller tubes where they go in the bigger pipe or to not set them in all the way to increase airflow.
jompcockBuilt a boot/glove dryer out of pvc pipe and a duct fan. Almost broke my wrist using the hole saw to put the holes in the main pipe but I figured out of a system. Have it set up with a timer so it runs long enough to dry everything out and not run longer than it needs to. Incredibly simple to make and way cheaper than an off the shelf boot dryer if you need to be able to dry the gear of 20 people at a time.
Just make sure to either put holes in the sides of the smaller tubes where they go in the bigger pipe or to not set them in all the way to increase airflow.
I have to put rice in my boots if I'm skiing consecutive days 💀
Go check out one of the most recent posts on best photography thread. I posted 3 other images of mine. You can also go to my insta which is linked in my profile. Thanks!
**This post was edited on Apr 28th 2023 at 12:06:26pm
Wanna figure out how to make some kind of bayonet mount for my fisheye lens so I can do one turn to lock it onto my cam, instead of painstakingly threading it on every time. Would be super useful since I’m always taking the fisheye on and off multiple times a run when I’m filming with the boys. Probably will have to knock off the rust on my SolidWorks skills.