I have this idea of turning the heel piece of my Look Pivots into a shift knob when I'm done using them, has anyone done this before?
I've seen pole grips but that might be a new one.
good idea but some how they would still end up penetrating people....sneaky mofos
isaacwronggood idea but some how they would still end up penetrating people....sneaky mofos
The frenchies are a horny breed. Who else would write on the chalkboard that the starting point for the pivot heelpiece was a thermoplastic dildo
please figure out how to do it so I can copy you
I use my spare pivot brake as a dildo need another for a shift knob
I had an old pole grip in my car in high school, is was so freakin rad! But I’m pretty sure a binding wouldn’t be too hard to do
me after swapping in my pin binding toe piece
freeskibum82lemme guess.. you drive a subaru wrx..
LOL I wish... it’s my dream car. A good ol 2005 WRX STI Blobeye. I actually drive a 1999 Toyota Tacoma.
gorbdawggybrentplease figure out how to do it so I can copy you
I’ll try and make a sketched out plan of doing it and attempt it or someone else can in the meantime.
shred14LOL I wish... it’s my dream car. A good ol 2005 WRX STI Blobeye. I actually drive a 1999 Toyota Tacoma.
Used to drive a 2002 wrx. Now I drive a 97 4runner. You have the better car trust me
Haha, funny thing is I need a new knob for my 98 4runner. I’ll try making one with an old heel piece and I’ll post it in here if it ends up working out.
daytactic7Haha, funny thing is I need a new knob for my 98 4runner. I’ll try making one with an old heel piece and I’ll post it in here if it ends up working out.
Sick! Best of luck!
r00kieI've seen pole grips but that might be a new one.
same here
skiing's cool but i'm more of an F-22 guy so this is what i have in my '97 Reliant Robin
SofaKingSickskiing's cool but i'm more of an F-22 guy so this is what i have in my '97 Reliant Robin
Hahaha, That’s sweet!
SofaKingSickskiing's cool but i'm more of an F-22 guy so this is what i have in my '97 Reliant Robin
Talk about an expensive shift knob! Good idea though, maybe I can install a 20 mm cannon and shoot out the tires of bad drivers.
ReturnToMonkeyTalk about an expensive shift knob! Good idea though, maybe I can install a 20 mm cannon and shoot out the tires of bad drivers.
that's good thinking. i'm saving up to buy chaff countermeasures, you know, to help get cops off my tail
SofaKingSickskiing's cool but i'm more of an F-22 guy so this is what i have in my '97 Reliant Robin
I used to work on fighter jets, there was always stories of people retrofitting sticks into gearshifts. You'd be surprised at what would slip through supply system cracks
what about a chairlift "chair" as car seats? would be pretty comfortable too
ReturnToMonkeyTalk about an expensive shift knob! Good idea though, maybe I can install a 20 mm cannon and shoot out the tires of bad drivers.
jokes on you im an a-10 guy....i just brrrt the traffic to oblivion
SofaKingSickskiing's cool but i'm more of an F-22 guy so this is what i have in my '97 Reliant Robin
Lmao the best part of this is that it's in a reliant robin. The car the furthest possible distance from being a fighter
hdubsLmao the best part of this is that it's in a reliant robin. The car the furthest possible distance from being a fighter
Actually not true. Fighters are designed to be inherantly unstable so they can maneuver faster. The Robin is one of the most unstable cars out there. Also it's small and probably very easy to retrofit with armament
cool idea but id rather not shift a car with something that’s spent a fair amount of time up my ass
Update for the binding shifter
It’s going well I just need to take off the pressure arms. Anyone know how to remove these?
once I get them off in am going to sand the paint of the heel piece and polish it.
ReturnToMonkeyActually not true. Fighters are designed to be inherantly unstable so they can maneuver faster. The Robin is one of the most unstable cars out there. Also it's small and probably very easy to retrofit with armament
I never thought of in that way. But unlike a fighter jet they tend to roll away from the turn, not with it
daytactic7Update for the binding shifterIt’s going well I just need to take off the pressure arms. Anyone know how to remove these?
can you just grind them off with a belt sander?
PissWizard69can you just grind them off with a belt sander?
That was gonna be my last resort, I was wondering if there was any other way to get them off but it doesn’t seem like there is.
daytactic7That was gonna be my last resort, I was wondering if there was any other way to get them off but it doesn’t seem like there is.
angle grinder probs best bet
Try drilling through the silver bolts and the may slide off
Drill the head of the rivet off. Do you plan to paint this? not gonna lie, the shape of this will be strange for a manual shifter.
freeskibum82Drill the head of the rivet off. Do you plan to paint this? not gonna lie, the shape of this will be strange for a manual shifter.
Agreed, as someone who tracks their car shift knobs can make a huge difference (at least for me) but it would be dope for some daily driving and ski hill clout.
Dougie_FreshAgreed, as someone who tracks their car shift knobs can make a huge difference (at least for me) but it would be dope for some daily driving and ski hill clout.
Style/Clout > functionality
shred14Style/Clout > functionality
The entire mindset of park skiing
Angle grinder would be pretty easy. Then could flap it smooth and paint it if you wanted could probably borrow one from somebody or they start at like 15 bucks at harbor frieght.
Threads cause it looks like it could come out sick
theabortionator15 bucks at harbor frieght.
Man is trying to finish a project here, not just get it started.
r00kieMan is trying to finish a project here, not just get it started.
DISS
r00kieMan is trying to finish a project here, not just get it started.
I mean it's not like having an angle grinder will ever be useful again. People were talking about using belt sanders.
Idk.
theabortionatorI mean it's not like having an angle grinder will ever be useful again. People were talking about using belt sanders.Idk.
Not criticizing your idea, just making a joke on Harbor Freight.
r00kieNot criticizing your idea, just making a joke on Harbor Freight.
Ah true true.
Def some good deals there but def some things to avoid buying there.
theabortionatorAh true true.Def some good deals there but def some things to avoid buying there.
I hear the jackstands are a killer deal though.
I ride pivots so no I’m not putting my hand on something that’s been up my ass.
r00kieI hear the jackstands are a killer deal though.
what you did there.. i see it
put a toepiece on your brake pedal and a heelpiece on the gas for blipshifts
SofaKingSickskiing's cool but i'm more of an F-22 guy so this is what i have in my '97 Reliant Robin
op were gonna need to see a vid of you rolling through the gears shifting this thing
TRVP_ANGELme after swapping in my pin binding toe piece
Shifting into reverse like
I got inspired and did this.
Old set of bars and my old favorite grips and a little hacking and bodging and now everyone knows how hard I shred.
bakemasterI got inspired and did this.Old set of bars and my old favorite grips and a little hacking and bodging and now everyone knows how hard I shred.
Sick!! I really like it.