Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!
I embarked on the nearly impossible mission to apply this Saga dye-cut cleanly and smoothly to the outer layer of my helmet, and my plans are slowly imploding as we speak.
As you can see, It is clearly fucked with a capital fuck. This is just utterly terrible. I asked my mom what to do and she told me to ask NS.
Whoa, fuck.
Shes a frisky one.
Any suggestions? It appears salvageable. +k for good ideas.
I think your first mistake was that Wisconsin sticker.. or whatever that is.
At this point, that sticker is done for. Rip it off an get a new one. Unless you want a jumbled white mass of diecut anus. For future reference, Start at one side, and continue to the other side while avoiding bubbles and folds, it can help to cut it up but I don't recommend it. Good luck
When you try to set the sticker down on the helmet, there will be sections that fold over due to the helmet not being a flat surface and what not. Cut these fold-over sections as best as possible to where the lines still flow together. Takes a little time, but can be done.
If you need another saga sticker, I have another white one I could send you if you want.
It took me a solid 12 minutes on the Internet to find this video telling you what you should do. http://www.bobsblitz.com/2010/11/flaming-heat-lebron-james-super-duper.html?m=1
darticus_primei did the same thing, use an exacto knife and cut off the parts that are folding, the shape will be a little weird but it works
This is actually a really good idea jettison the letter that no longer visible, and buy a really crappy letter sticker and put it in the hole that you cut out with the exacto knife