Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!
cddlswthsqrrls
Excuse the obnoxious instagram filter.
Changed it up a little bit and made a flatter lip. Had too much kick to it. Pretty fun set up though. We've got a corrugated tube and a normal tube that were trying to fix up so they're hittable.
agnarskiif you are still getting a little too much kick out of the lip, you can elevate the bottom of the tranny. mine was fairly short, so that was the best solution. yours seems a little longer so you probably have it dialed
RparrShameless self promotion. I have spent 4 years skiing this, but I can't use it this summer because of a fucking knee injury.
cddlswthsqrrls
Excuse the obnoxious instagram filter.
Changed it up a little bit and made a flatter lip. Had too much kick to it. Pretty fun set up though. We've got a corrugated tube and a normal tube that were trying to fix up so they're hittable.
isaacwright33https://www.newschoolers.com/watch/718688.0/All-8-Summer-Setup
In the process of building a new one because I moved. But this is mine from back in Rutland VT
jackdonovanmy bad for sideways photo
currently extending the transition
https://www.newschoolers.com/watch/765579.0/pov-summer-setup
pov
WildDingleBerryThat's a sick setup man!
isaacwright33https://www.newschoolers.com/watch/718688.0/All-8-Summer-Setup
In the process of building a new one because I moved. But this is mine from back in Rutland VT
hippy.killerWhere did you get those tubes at?
georgen12I've built the whole ramp but not the rail yet, how did you guys make the rails out of the thin PVC pipes?
georgen12I've built the whole ramp but not the rail yet, how did you guys make the rails out of the thin PVC pipes?
cock_in_my_asshttps://www.youtube.com/watch?v=VG4NPSjhP88
casey_copeDo you carve and transfer from the jump over to the rail?
isaacwright33Dope setup and rail. I found it funny that you were snow plowing on mnsow though haha
georgen12I've built the whole ramp but not the rail yet, how did you guys make the rails out of the thin PVC pipes?