First is a pair of 09/10 191cm ON3P Caylors. 120 underfoot, very small amount of camber (almost flat), super fun ski. Loves the trees and pivots on a dime. Overall a very fun and versatile big ski. Used but in great shape, bases and edges have a fresh quick tune on them. Top sheet has some chipping, few small scratches, but no core shots and overall great condition. The white bases have stained red a bit over time due to red wax.
Two mounts, both for the Solomon STH series (STH 14, 16, 916 etc). Current is for ~308 BSL at -2.5cm. Second is a set of quiver killers for ~297 bsl Solomon bindings at -1.5cm. The mount mark on the sidewalls for these is actually a range, from roughly -1.5cm to -3cm, so both mounts fall within the range. Should be plenty of room for another mount or to remount the heel piece for bigger boots. The 916 bindings are sold.
$175 plus shipping.
Next I have some PM Gear 186cm Lhasa Pow Fats. Hybrid layup, flex is a good med/stiff. 120mm underfoot, flat (no camber). Awesome ski, got it in a trade and haven't had much time on it. Overall has very few days on it. Edges and bases are excellent. Had a full edge tune and wax, skied only once since. Few shallow scratches, and one very small slightly deeper one that was PTEX base-weld repaired. Never had a base grind. Has ~2.5 mounts. First was for Markerfit plates, 308 bsl I believe. Those holes are plugged. Next was for large dukes (non epf), 308 bsl as well. Binding freedom inserts. The "2.5" mount is for jester/jester schizo. Reuses two of the front Duke holes. 330 BSL at -1.5 from the line for regular jesters, I used a demo rear heel for 308 bsl on the line. Or with schizo's for a range of BSL's, can accomodate 295-335 BSL and get a good usable range around the line. All the jester holes are binding freedom inserts as well.
One ski does have a minor sidewall blem- basically during the build process some of the sidewall material didn't fill in properly. Talked to the guy who made the skis, and it was ONLY a water seal issue, and not structural. He filled it in with the yellow epoxy, I hit it again with some leftover grey epoxy when I was doing the inserts just to be extra sure.
Not sure I want to sell these, but someone else will probably give them a better home than I do, simply have too many fat skis. Asking $275 plus shipping
On to bindings. First I have some small 2011 marker Duke bindings, last year before EPF. Very little use and almost no touring done on them- have 0 slop. 110mm brakes, SOLD. Thought I might be doing some short tours but that didn't end up happening.
Last are a pair of Look Pivot 18 bindings. Have been used only one day on my GPOs. I downsized boots, so these no longer work on those skis. I do have inserts for STH2 in the GPOs, so just going to roll with the Solly's. XXL ~117-120mm brakes. SOLD
PM me if interested. Open to offers, maybe trades but mostly just want to sell. Buy stuff together and I'll discount. Local CO pickup and shipping is free obviously. Feel free to ask questions. Thanks all.
**This thread was edited on Jan 24th 2015 at 9:12:08am
**This thread was edited on Jan 30th 2015 at 7:31:33pm
**This thread was edited on Feb 4th 2015 at 6:53:16pm
**This thread was edited on Feb 7th 2015 at 6:55:32pm
