Member of the Month

JalmarKalmar
April, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Need some help for a blown out edge

profile picture
drewolson24
Posts: 449 - Karma: 897
Thank you for spending some time for reading this post.
So this past summer I bought a pair of Filthy Riches from John Kutcher, probably used about half a season or so. They had only 1 or 2 edge cracks on each inside edge of the skis and werent bad at all. I have almost 25 days on them this year and I already have a chuck about 5 inches long missing. Is there anything I can do to the ski itself or to improve my riding other than switching the left and right ski around so I dont have to grind on the missing edge?
Thanks again,
Drew
POLL
Edit Poll
Votes:

Take care when editing a poll; Options should be similar to maintain vote integrity.

More options will be added automatically as you type. You must supply a question and at least two options. No HTML is allowed.

Dec 4 2014 9:31AM
1 0
profile picture
tomPietrowski
Posts: 7099 - Karma: 17,045
One the edge is gone there is no a lot you can do really. I tend to find especially when the skis will be used on rails that replacing an edge will not be effective. The forces will just rip the repair out and potentially damage the ski more. I would instead try to glue the ski back together and use them as a beater ski.

I actually have have a really beat set of skis with about 4 inches of edge missing that I am going to do a video of this exact repair. I should hopefully have it up by the start of next well. Hopefully that should give you some tips on what you could try.
Dec 4 2014 12:34PM
1 0
All times are Eastern (-4)