Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Jag35E on HMC?

profile picture
ReedSkis~
Posts: 2122 - Karma: 98
Hey guys, I currently film with a Canon hf10
I plan on upgrading to the Panasonic HMC40 within the next 1.5 years.

I am looking into buying a 35mm DOF adapter and have taken a liking to the Jag35E (vibrating).
I am almost a 100% sure that this will fit onto my hf10 without any problems, but i will also want to use it when i get my HMC.
Will it fit onto an HMC or will i have to look into buying the jag35xl? and will that on fit onto an hf10?

i believe the hf10 has a 37mm thread if that helps

Thanks,
Reed
Oct 7 2009 6:17PM
0 0
profile picture
dergblerp
Posts: 1303 - Karma: 77
Buying a 35mm adapter is one of my greatest regrets in terms of camera gear. They're really heavy, and complicate filming a lot. I really suggest renting/borrowing one and shooting with it for a day before you make your decision. The end result is cool, but i don' t think it's worth it personally.

As far as will it work with both cameras? most likely. If you do end up purchasing one, just keep in mind the following: I don't know much about the Jag35 as I use a Letus Extreme, but Letus makes several different models, The Letus Mini is targeted towards smaller cameras such as yours and will not work with big cameras such as the HMC, but the Letus Extreme/ultimate/elite, are all for larger cameras, but of course would also work on a smaller camera assuming you have the right stepup/down rings.
Oct 7 2009 6:49PM
0 0
profile picture
ReedSkis~
Posts: 2122 - Karma: 98
^besides it being heavy, why do you regret it

the jag35 is fairly inexpensive and i can get the whole setup for about $360

i can see it being a pain, but i think that it will last me a while (assuming it will work with the hmc) and will be a good investment

anyone else?
Oct 7 2009 7:05PM
0 0
profile picture
Octopus
Posts: 1175 - Karma: 55
http://forums.creativecow.net/thread/54/856386

read up!
Oct 7 2009 8:46PM
0 0
profile picture
ReedSkis~
Posts: 2122 - Karma: 98
Yea i know, but what confused me was that on the JAG website, the cameras they show in the picture with the jag35xl are the dvx and the xha1, which are a similar size to the hmc right?
Oct 7 2009 9:47PM
0 0
profile picture
ReedSkis~
Posts: 2122 - Karma: 98
haha alright
thanks guys
Oct 7 2009 10:17PM
0 0
profile picture
holyDINOSAURS
Posts: 7038 - Karma: 639
no the HMC is like, a 42mm filter diameter. the Dvx/HMC150 etc are 72mm
Oct 7 2009 10:19PM
0 0
profile picture
ReedSkis~
Posts: 2122 - Karma: 98
aight sounds perfect then, i'll need an adapter ring but it will most likely work

thanks guys
Oct 7 2009 10:37PM
0 0
All times are Eastern (-4)