Red Bull Unrailistic | LIVE Broadcast

Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Newbiest question ever

profile picture
sirhc
Posts: 5 - Karma: 10
I have been skiing for two seasons now, and love it. my only problem is that because of the way i was introduced to it, i am very unknowledgeable when it comes to the equipment. long story short, i have only had had me downs in the past, and i now have a brand new pair of line invaders...i know they have factory wax on them, but wanted to know if i need to wax them, or get them waxed before i use them?
Dec 9 2008 7:31PM
0 0
profile picture
Fish_Sandwich.
Posts: 9108 - Karma: 16
Just stick around NS for a while, especially gear talk and you will be fine.  I was like that 3 years ago and now I know a lot about gear just from being here and talking to skiers and stuff.
To answer your question, yes, it would be a good idea to put some wax on them besides the factory wax.
Dec 9 2008 7:32PM
0 0
profile picture
sirhc
Posts: 5 - Karma: 10
i normally lurk pretty hard, but never really had much to add to the conversation, so i never felt the need to post...thanks for the info, its much appreciated!
Dec 9 2008 7:35PM
0 0
profile picture
pjbauer
Posts: 2145 - Karma: 480
yeah get them waxed
Dec 9 2008 7:37PM
0 0
profile picture
no_steeze
Posts: 23992 - Karma: 4,270
i ski on factory wax sometimes but it's a good idea to do a base prep on them before skiing them for the first time
Dec 9 2008 7:44PM
0 0
profile picture
Pippin
Posts: 4846 - Karma: 661
from what ive been told it last half a day
Dec 9 2008 7:56PM
0 0
profile picture
Silence
Posts: 16030 - Karma: 149
Personally i like to give new skis a wax before taking them out for the first time
Dec 9 2008 8:07PM
0 0
profile picture
sirhc
Posts: 5 - Karma: 10
thanks for the quick response....i was pretty sure that was the answer, but just wanted too get a knowledgeable opinion
Dec 9 2008 8:12PM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
for sure wax them. they will work on the factory wax but its always good to get a good new layer on there.
Dec 9 2008 8:19PM
0 0
profile picture
Corben
Posts: 710 - Karma: 49
do you guys wax, scrape and brush? cus if you do that the wax really only last a few runs as well. why do you guys wax? base burn or just to keep em slippery?
Dec 9 2008 8:39PM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
yeah i wax scrape and brush
drip
run the iron to get it even
let it cool for at least an hour
scrape
brush
done
Dec 9 2008 8:48PM
0 0
profile picture
Corben
Posts: 710 - Karma: 49
when i raced, sometimes wed hotscrape and brush which gets shitty debri out n stuff, then leave it on over night and scrape and brush on the hill.

also before you iron its key to have the ski at room temp.
Dec 9 2008 8:58PM
0 0
profile picture
no_steeze
Posts: 23992 - Karma: 4,270
i do as follows:
brush to get the old wax/dirt out because if you hot wax before brushing you just push the dirt in further
then i drip, slide around
scrape
let that ski dry
drip, slide around
scrape
repeat 2 times
then brush at the end
Dec 9 2008 9:18PM
0 0
profile picture
sykonaut
Posts: 346 - Karma: 11
Damn holmes, Invaders after two seasons? Lucky.

http://www.youtube.com/watch?v=bXJMw4gLmGM

Pretty good video.
Dec 9 2008 9:31PM
0 0
profile picture
headlight
Posts: 165 - Karma: 15
https://newschoolers.com/web/forums/readthread/thread_id/401318/      similar discussion.....keeps happening
Dec 10 2008 1:48AM
0 0
profile picture
chazz.
Posts: 2721 - Karma: 23
Ski bases are like sponges, the more you wax, the more saturated the bases become. On all of my race skis and even my anthems, i wax 10-15 times before season, and every day after i get home from the mountain. The more wax you have in your base the longer it will last.
Dec 10 2008 11:32AM
0 0
profile picture
PacificRimJob
Posts: 24704 - Karma: 29,687
I ski on factory wax when I get a new pair of jib skis because A: I'm just going to tear the base to shit anyway, and B: I'm mad lazy...
Dec 10 2008 1:34PM
0 0
profile picture
jfoley019
Posts: 929 - Karma: 95

I keep the factory wax for early season then I get them waxed mid season. the reason why is that you going to end up fucking them up anyways.

Dec 10 2008 6:12PM
0 0
profile picture
Silence
Posts: 16030 - Karma: 149
you obviously don't care about speed
Dec 10 2008 6:27PM
0 0
profile picture
amo
Posts: 6709 - Karma: 1,248
my threads
Dec 10 2008 6:50PM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
if i ski on my bibbys for one day next week on the factory wax will it do any damage? cuz i wanna try em out once before i go home for break, but with finals and what not i honestly dont have time to be waxing skis
Dec 10 2008 8:01PM
0 0
profile picture
T_orageskiier
Posts: 580 - Karma: 13
invest in some simple waxing equipment man, an old iron is what i use then get some proper wax i just use a all around temperature wax , then all you need is a scraper and a nylon brush and some ski base cleaner. With this you can keep your skis running good all year. and you don't need to pay to get them waxed at a shop.
Dec 10 2008 9:23PM
0 0
profile picture
king_pin
Posts: 120 - Karma: 9
jesus christ, 10-15 times before the season? :O
Dec 10 2008 11:19PM
0 0
profile picture
headlight
Posts: 165 - Karma: 15
Use em. Factory wax is usually not much but a buffed on coat pof transit wax. No problem.
Dec 11 2008 12:21AM
0 0
profile picture
jdilla
Posts: 706 - Karma: 41
I try to wax my skis once a week, realistically it only happens maybe every other week. If they're jib skis don't sweat it too much as the bases are going to get fucked anyway. Plus good luck with your Invaders, those bases are so fucking hard they suck at absorbing wax. I had to sit on my tails last year just to avoid knuckling shit.
Dec 11 2008 12:31AM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
i realize they arent gonna be speedy, i just wanna make sure im not gonna somehow fuck em up
Dec 11 2008 2:30AM
0 0
All times are Eastern (-4)