Red Bull Unrailistic | LIVE Broadcast

Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Sliding on paint?

profile picture
BkCountrySkrMO2
Posts: 1642 - Karma: 103
so im welding a steal bar rail in school, almost done, my tech teacher says it would be a good idea to paint the surface of the steel so that the paint will go into the pores of the metal and prevent rust, my question is will i be able to slide on a painted rail? obviously at mountains the paint has been chipped off over time, good idea or bad idea? thanks
May 23 2007 9:39AM
0 0
profile picture
kbrando
Posts: 1206 - Karma: 889
i would say no, it will be really sticky at first and to prevent rust just bring it inside when ur done or just buff the rust off every once in a while
May 23 2007 10:49AM
0 0
profile picture
papasteeze
Posts: 12055 - Karma: 911
paint it - the rust will be a pain to deal with if you don't use it every day.
May 23 2007 10:56AM
0 0
profile picture
skiRay
Posts: 7558 - Karma: 926
yeah, then take you ski and slide it back and forth to get some off... maybe
May 23 2007 11:05AM
0 0
profile picture
GreenStezz
Posts: 3570 - Karma: 720
paint and sand the top
May 23 2007 11:13AM
0 0
profile picture
oiECSoi
Posts: 1447 - Karma: 10
i built a rail in metalshop and painted it and it slid perfectly fine this whole winter. plus it keeps rudt off. just put a little bit of snow or water on it before and it will be prime
May 23 2007 1:05PM
0 0
profile picture
SeanK
Posts: 702 - Karma: 130
paint it most mountain pait theres every year..if it does get sticky, sand paper it
May 23 2007 1:31PM
0 0
profile picture
BkCountrySkrMO2
Posts: 1642 - Karma: 103
so im welding this rail in tech class and the metal is slightly rusted, so my teacher wants me to spray on this rust killer/ paint primer before i paint it, once i paint i intend to sand the paint off, will i be able to sand away the primer/ will it kill the slidability of the steel? thanks
May 24 2007 5:48PM
0 0
profile picture
steevner
Posts: 4502 - Karma: 47

the paint will come off after a few slides. don't worry about it

May 24 2007 5:50PM
0 0
profile picture
BkCountrySkrMO2
Posts: 1642 - Karma: 103
so i shouldnt worry about putting this primer/rust killer on?
May 24 2007 5:51PM
0 0
profile picture
steevner
Posts: 4502 - Karma: 47
better sliding on some paint for a bit than increasing amounts of rust
May 24 2007 5:52PM
0 0
All times are Eastern (-4)