Red Bull Unrailistic | LIVE Broadcast

Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

How do i fix this

profile picture
tribefan226
Posts: 2122 - Karma: 209
so i hit a nail that was sticking out of a box today and it put a pretty deep hole in the base of my ski. it goes all the way down to the core. should i just fill the hole with wax or fill it with epoxy and cover it with wax? any other suggestions?
Feb 17 2007 8:41PM
0 0
profile picture
freeski1620
Posts: 5670 - Karma: 1,718
depending how good of a ski tech you are, you could
-base weld it
-p-tex it
-epoxy it
- or fill it with wax.
i wouldnt do the last though because you will have to do it every time you ride!
Feb 17 2007 8:45PM
0 0
profile picture
Pirruccio
Posts: 1301 - Karma: 70
p tex dat shit
Feb 17 2007 8:47PM
0 0
profile picture
freeski1620
Posts: 5670 - Karma: 1,718
thats what i would do because base welding takes a lot of effort.
Feb 17 2007 8:49PM
0 0
profile picture
Silence
Posts: 16030 - Karma: 149
man there really should NOT be nails sticking out of features in your park. That could open a serious amount of liability at your hill.

If you can be fucked I'd take your skis to the management there and show them the box that did i - tell THEM to fix your skis. It sounds like it wouldnt have happened if it wasn't for them.
Feb 17 2007 8:51PM
0 0
profile picture
jedi.Jim
Posts: 1133 - Karma: 13
^^ Word, try that. If that doesn't work, don't just fill it with wax; that won't last long. Fill it with glue, epoxy, or something of the sort. After you do that, take to a shop to get the bases stoneground to help set and even out whatever you put in there. But, it would probably be better to take it to your local shop.
Feb 17 2007 8:55PM
0 0
profile picture
Albino
Posts: 1400 - Karma: 123
if the hole goes thru to the core, then ptex will often just pull out - it doesnt adhere to the core material. id fill it totally with epoxy, then sand it back to flat a it cures (which is pretty quickly by the way)
Feb 17 2007 8:56PM
0 0
profile picture
tribefan226
Posts: 2122 - Karma: 209
well yeah i was thinkin i could do that but they'd prolly just be like "u gotta use the park at ur own risk" or some shit like that. i think im just gonna fill it with wax for now cuz i wanna go skiin tomorrow. ive got som epoxy that ill prolly use to fix it better later but it take 24hr to dry so i cant use that and ski tomorrow
Feb 17 2007 8:57PM
0 0
profile picture
tribefan226
Posts: 2122 - Karma: 209
one more question i hav eis if i fill it with epoxy and then wax over that will the wax adhere to the epoxy?
Feb 17 2007 8:58PM
0 0
profile picture
jedi.Jim
Posts: 1133 - Karma: 13
It might. I'm not sure. How big is the gash?
Feb 17 2007 9:00PM
0 0
profile picture
Silence
Posts: 16030 - Karma: 149
dont think so..wax is purely a temporary fix. epoxy or ptex would last you a while
Feb 17 2007 9:01PM
0 0
profile picture
Sholte
Posts: 2929 - Karma: 12
p-tex it will fix youre ski, and lasts longer
Feb 17 2007 9:03PM
0 0
profile picture
tribefan226
Posts: 2122 - Karma: 209
bout an inch long, 1/2 inch wide and 1/2 inch deep
Feb 17 2007 9:10PM
0 0
profile picture
Aenigma
Posts: 11256 - Karma: 424
Ptex will crack up and fall out after a few days, so that's just a temporary fix.  However, it will be better than having wax come out after an hour or two on your ski.  I'd just do it right the first time and get a base weld, they aren't very expensive and they'll last a really long time.  If you have a friend that works at a shop you can get it done for free, too.
Feb 17 2007 9:16PM
0 0
profile picture
tribefan226
Posts: 2122 - Karma: 209
how long do u think it would take a shop to do a base weld?
Feb 17 2007 9:26PM
0 0
profile picture
Aenigma
Posts: 11256 - Karma: 424
It only takes a couple minutes to actually do it, but they'll probably have a lot of other work to do too.  If they're not busy you could be in and out in 15 minutes.
Feb 17 2007 9:28PM
0 0
profile picture
tribefan226
Posts: 2122 - Karma: 209
is it easy enough that i could do it myself? i hate takin skit to the shop and not havin it for a few days
Feb 17 2007 9:32PM
0 0
profile picture
Aenigma
Posts: 11256 - Karma: 424
If you have a base welder, yeah, it's super easy.
Feb 17 2007 9:36PM
0 0
profile picture
powfoka
Posts: 2709 - Karma: 160
ptex will fall out the first time the ski flexes wax will be gone in 1-2 runs if you put epoxy in there no ski tech will want to mmess with it sack up the cash and go have it basewelded tell the tech you will tip him a few bills and hes should be able to do it in like 15 minutes
Feb 17 2007 9:36PM
0 0
All times are Eastern (-4)