Member of the Month

partyandBS
April, 2023

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Need help BOOT pain

profile picture
cody04
Posts: 32 - Karma: 62
So last week I drove a few hour to get fitter in a new boot, my last boot were Head raptor RS 100 and I was getting crazy shin bang, he recommended some drop kick pro since the last was 99 and my raptors were 95, I also have a footbed that I bought for 50$ that I placed in the boot. Last night we went skiing, the boot fitter so nice really comfy. 5 minute passes and I started getting pain under my foot only on my left foot, il post a picture exactly were that pain is coming from. Keep in mind I did heat mold the liner with rice, the pain is so burning that I have to almost remove the boot, feels like a burning/cramp

I really hope I can get this thing figured out,
I also saw a post about not putting liner in full tilt since there so tight but Idk,

Cody,
Jan 20 2022 7:49PM
1 0
profile picture
CatdickBojangles
Posts: 5885 - Karma: 59,309
Sounds like you need a new boot fitter
Jan 20 2022 8:53PM
10 0
profile picture
Non_State_Actor
Posts: 4129 - Karma: 13,760
Do you wear any kind of supportive footwear day to day? It could be a cramp caused by the insole and is something that will pass with continued use. YMMV I am not a podiatrist nor a bootfitter.
Jan 20 2022 9:10PM
0 0
profile picture
cody04
Posts: 32 - Karma: 62
I don’t, and I’m very flat footed,
Jan 20 2022 9:31PM
0 0
profile picture
Non_State_Actor
Posts: 4129 - Karma: 13,760
cody04I don’t, and I’m very flat footed,


Try putting the footbed in a pair of your shoes and wear them around a bit, see if it reproduces the feeling or if it gets better.
Jan 20 2022 10:23PM
0 0
profile picture
cody04
Posts: 32 - Karma: 62
mystery3Try putting the footbed in a pair of your shoes and wear them around a bit, see if it reproduces the feeling or if it gets better.


Okay, il give that a try, il keep u posted!
Thanks,
Jan 20 2022 11:04PM
0 0
profile picture
ethanshredz
Posts: 230 - Karma: 1,038
Your so-called "boot fitter" didn't even offer to heat mold the liners? 🚩🚩🚩
Jan 20 2022 11:20PM
6 0
profile picture
cody04
Posts: 32 - Karma: 62
ethanshredzYour so-called "boot fitter" didn't even offer to heat mold the liners? 🚩🚩🚩

I had to drive 5h just to get to a fitting shop, I got there at 3, the shop was closing for 5, by the time I got served and the boot chosen, I just had time to try them on and leave, I know… I wish I could of done it properly!
Jan 21 2022 6:49AM
0 1
profile picture
mnosbod
Posts: 95 - Karma: 921
From my experience, non-custom over the counter footbeds are just glorified versions of what already comes in the boot. Once I splurged and got ones custom to fit to my feet it changed everything
Jan 21 2022 11:46AM
1 0
profile picture
Non_State_Actor
Posts: 4129 - Karma: 13,760
mnosbodFrom my experience, non-custom over the counter footbeds are just glorified versions of what already comes in the boot. Once I splurged and got ones custom to fit to my feet it changed everything


While obviously not as good as a full custom footbed the "off the shelf" "trim to fit" styles usually have options for more arch support or a deeper heel pocket etc., the stock units that came in my Hawx Ultra are just flat 3-4mm thick plush covered foam, the offer no support whatsoever.
Jan 21 2022 12:16PM
1 0
profile picture
cody04
Posts: 32 - Karma: 62
Since I'm flat footed I might get some custom insole, There just so dam expensive...
Jan 21 2022 12:40PM
1 0
profile picture
plugs
Posts: 98 - Karma: 353
cody04Since I'm flat footed I might get some custom insole, There just so dam expensive...


They're not cheap but you can use them for a long time and go through a couple pairs of boots with them so if you look at dollars per use it's pretty reasonable. Getting your boots sorted out should always be number one priority with gear, its not sexy but itll increase your comfort and performance when skiing which is more than can be said about pretty much any other upgrade.

As long as you're done growing it's an extremely worthwhile investment.
Jan 21 2022 12:52PM
2 0
profile picture
animator
Posts: 4435 - Karma: 25,013
For the record, the rice thing is garbage. I know it’s an official thing on the Intuition website, but it doesn’t work nearly as well as an actual oven and a qualified fitter doing it. I’d go back when you have time and get them molded properly. Pain in the ball of your foot comes from lack of metatarsal support. A footbed (especially one with a met pad) will help this, I get the same thing without footbeds in.
Jan 21 2022 1:10PM
5 0
profile picture
cody04
Posts: 32 - Karma: 62
animatorFor the record, the rice thing is garbage. I know it’s an official thing on the Intuition website, but it doesn’t work nearly as well as an actual oven and a qualified fitter doing it. I’d go back when you have time and get them molded properly. Pain in the ball of your foot comes from lack of metatarsal support. A footbed (especially one with a met pad) will help this, I get the same thing without footbeds in.


So the pain is not on the ball of my foot it's right under that, like I circled, anyways today I'm heading there again, going to get them heat molded properly. Il also get a custom foot bed created,

I really hope this fixes my problem,
Jan 22 2022 10:14AM
1 0
profile picture
Dustin.
Posts: 13839 - Karma: 7,698
cody04Since I'm flat footed I might get some custom insole, There just so dam expensive...


They last for years, and the boot fitting is barely worth it if you don't start at the beginning: your insole.
Jan 22 2022 10:56AM
1 0
profile picture
cody04
Posts: 32 - Karma: 62
Just got them done! Wish me luck, heading to the hill tomorrow!
Jan 22 2022 5:48PM
1 0
All times are Eastern (-4)