Member of the Month

Farmville420
August, 2023

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Edge of Vishnu’s coming off

profile picture
Tannerhalscousin
Posts: 88 - Karma: 877





Minor issue but I want to take preventative precautions to make them last. Just I just duck tape the tips and hope for the best? Any ideas if things I could do to stop them from getting worse?
Oct 12 2021 7:22PM
7 1
profile picture
BradFiAusNzCoCa
Posts: 6054 - Karma: 51,450
Put epoxy in there and clamp it together for a couple days in a warm room
Oct 12 2021 7:25PM
8 0
profile picture
pissnu_skis
Posts: 431 - Karma: 6,846
Rivets
Oct 12 2021 7:41PM
5 1
profile picture
Mackaroni_space
Posts: 1765 - Karma: 24,079
They’re vishnus you’ll be fine
Oct 12 2021 8:19PM
12 0
profile picture
CarsonLentz
Posts: 159 - Karma: 1,415
Gorilla glue 2 part epoxy will do the job.
Oct 12 2021 9:20PM
3 0
profile picture
piss.boy
Posts: 1456 - Karma: 10,177
Epoxy will not work long term. Just do something I didn't when this started on my skis and they got trashed. Cool drawer how the he'll is it coming out of the wall
Oct 12 2021 9:21PM
4 2
profile picture
CatdickBojangles
Posts: 5893 - Karma: 59,376
Piss_BoyEpoxy will not work long term. Just do something I didn't when this started on my skis and they got trashed. Cool drawer how the he'll is it coming out of the wall


Epoxy will work long term.
Oct 12 2021 9:33PM
9 0
profile picture
piss.boy
Posts: 1456 - Karma: 10,177
CatdickBojanglesEpoxy will work long term.


Didn't for me. Prolly just didn't clamp it long enough If it has for other people haha
Oct 12 2021 9:36PM
2 0
profile picture
animator
Posts: 4449 - Karma: 25,109
Piss_BoyDidn't for me. Prolly just didn't clamp it long enough If it has for other people haha


Might not have used the right stuff
Oct 12 2021 10:43PM
2 0
profile picture
Tannerhalscousin
Posts: 88 - Karma: 877
Piss_BoyEpoxy will not work long term. Just do something I didn't when this started on my skis and they got trashed. Cool drawer how the he'll is it coming out of the wall


Thank you, The drawer is built into the wall. I fuck with it aswell
Oct 12 2021 11:17PM
5 0
profile picture
bertBertson
Posts: 167 - Karma: 3,062
Epoxy worked for me, pics of the process here:

https://www.newschoolers.com/forum/thread/923029/Rate-my-ski-repair

I used JB Weld Marine and it's held so far but if you're serious about doing it right I would maybe search around some old threads for a better epoxy rec. I found the JB was super viscous so it was difficult to get good coverage inside the gap.
Oct 12 2021 11:40PM
2 0
profile picture
Non_State_Actor
Posts: 4201 - Karma: 14,180
You want West System G Flex.

https://www.westsystem.com/specialty-epoxies/gflex-650-toughened-epoxy/

You can get it locally if there are boating stores near you or online.
Oct 13 2021 12:03AM
6 0
profile picture
Paul.
Posts: 1496 - Karma: 9,919
Gflex epoxy. Mix in equal parts, and work it into the ski with a razor blade and a heat gun. Clamp with some flat material (a piece of plastic or something) to spread out the pressure
Oct 13 2021 1:22AM
6 0
profile picture
weastcoat
Posts: 5636 - Karma: 61,849
mystery3You want West System G Flex.

https://www.westsystem.com/specialty-epoxies/gflex-650-toughened-epoxy/

You can get it locally if there are boating stores near you or online.


Paul.Gflex epoxy. Mix in equal parts, and work it into the ski with a razor blade and a heat gun. Clamp with some flat material (a piece of plastic or something) to spread out the pressure


Damn I taught this site well

Or did it teach me well??


fr tho if you really want it to last if the edge gets too mangled, cut it out and epoxy the gap that’s left. The one thing that screws up skis is edges. They’ll tear up the base/delaminate shit like nothing else. It’s like swallowing a piece of glass and your intestines getting fucked up.


on my first pair of vishnus I had this happen, I epoxied it with g flex and cut a lil but of the edge out, cause it was mangled from me eating shit on a rail. These skis were ridden almost everyday by me for two winters, and all of this past season by my lil cousin. Epoxy is still in there, hard as a rock. g Flex is nothing short of god tier.
Oct 13 2021 1:49AM
8 0
profile picture
Tannerhalscousin
Posts: 88 - Karma: 877
weastcoastDamn I taught this site well

Or did it teach me well??


fr tho if you really want it to last if the edge gets too mangled, cut it out and epoxy the gap that’s left. The one thing that screws up skis is edges. They’ll tear up the base/delaminate shit like nothing else. It’s like swallowing a piece of glass and your intestines getting fucked up.


on my first pair of vishnus I had this happen, I epoxied it with g flex and cut a lil but of the edge out, cause it was mangled from me eating shit on a rail. These skis were ridden almost everyday by me for two winters, and all of this past season by my lil cousin. Epoxy is still in there, hard as a rock. g Flex is nothing short of god tier.


Yo clutch hill definitely try this out
Oct 13 2021 7:58AM
2 0
profile picture
Session
Posts: 5215 - Karma: 20,193
weastcoastDamn I taught this site well

Or did it teach me well??


fr tho if you really want it to last if the edge gets too mangled, cut it out and epoxy the gap that’s left. The one thing that screws up skis is edges. They’ll tear up the base/delaminate shit like nothing else. It’s like swallowing a piece of glass and your intestines getting fucked up.


on my first pair of vishnus I had this happen, I epoxied it with g flex and cut a lil but of the edge out, cause it was mangled from me eating shit on a rail. These skis were ridden almost everyday by me for two winters, and all of this past season by my lil cousin. Epoxy is still in there, hard as a rock. g Flex is nothing short of god tier.


@iggyskier and @RudyGarmisch taught this site.
Oct 13 2021 11:02AM
5 0
profile picture
milo-mcsenderson
Posts: 549 - Karma: 6,926
bertBertsonEpoxy worked for me, pics of the process here:

https://www.newschoolers.com/forum/thread/923029/Rate-my-ski-repair

I used JB Weld Marine and it's held so far but if you're serious about doing it right I would maybe search around some old threads for a better epoxy rec. I found the JB was super viscous so it was difficult to get good coverage inside the gap.


If you need to get epoxy in a small space and it's too viscous a heat gun/hairdryer really is your friend. If you mix it up on something like greaseproof/baking paper you can fold it in half and use the channel to get it where it needs to go. Clamp it up and let it set, don't worry too much about over spill, after 24hrs (maybe 48 depending on your epoxy) you can sand it back down.

I use epoxy all the time for little and bigger jobs; obviously there's a line where you should take it to a pro but I always like doing stuff myself if I can.

EDIT: just seen your repair and it looks dope, that's the good shit my man.

Epoxy
Clamp
???
Profit!

**This post was edited on Oct 13th 2021 at 12:11:32pm
Oct 13 2021 12:08PM
5 0
profile picture
animator
Posts: 4449 - Karma: 25,109
Session@iggyskier and @RudyGarmisch taught this site.


Lmao facts
Oct 13 2021 2:32PM
1 0
profile picture
CalCarson
Posts: 1047 - Karma: 5,950
ive had problems with this on other skis in the past. once it starts, it keeps delaming until the ski is unskiable. All the vishnus ive rode stop delaming after an inch. Not sure why or how but I usually just rip the top inch of edge and base off and they keep skiing great for a long time.
Oct 16 2021 4:41PM
6 0
profile picture
bbw.enthusiast
Posts: 265 - Karma: 767
CalCarsonive had problems with this on other skis in the past. once it starts, it keeps delaming until the ski is unskiable. All the vishnus ive rode stop delaming after an inch. Not sure why or how but I usually just rip the top inch of edge and base off and they keep skiing great for a long time.


sponsored shill moment
Oct 16 2021 6:39PM
1 0
All times are Eastern (-4)