Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Official Wood and PVC rail thread

profile picture
nsnski240
Posts: 1623 - Karma: 15

I've seen a lot of'backyard park' posts lately... so instead of retyping this everytime::

Start by making the bottom 2x4 and the supports that touch the ground our of pressure treated lumber, everything else can be normal 2x4s...
Vertical supports every 3ish feet

PVC - make it shot gun with 2 2in pieces or 4 1/4 tubes. Make the holes on top bigger with a larger bit so the heads of the screws are hidden inside the piping... use screws all through out.

It doesn't matter how long the PVC piece is as long as it is held in with the screws every 2 or so feet and at the ends. Kinks are fine too, just make sure the pvc on the down part is below the flat so you don't get hung up on it.

Hope this helps



------------>
Matt Hein - #1 skiboarding legend
D BREES 101 Cult
Land Shark eeee eee eee

'Getting married for sex is like buying a Boeing 747 for peanuts'
Mar 11 2005 5:06PM
0 0
profile picture
freestyle_skier6
Posts: 217 - Karma: 11
thanks again!

get some pics up here asap!
Mar 11 2005 5:08PM
0 0
profile picture
Lineskier-101
Posts: 7863 - Karma: 22
Thanks, I'm making a pvc one. i just went out with a plain piece of pvc and laid it on the ground. We only had like half and inch of really sticky snow. it was pretty much mud skiing. It was fun
--------------------------------------
'Duran Duran bought Armada, Armada bought Microsoft, Microsoft bought MSP and AOL, AOL owns Time4 which owns the MountainSportsMedia which owns SKi, Skiing and RIP Freeze... so Armada now owns McDonalds and Coke. Have a coke and smile and wake the hell up with low low prices and Colombian Coffee (which Tanner owns a large portion of with his silent SouthAmerican partner Flaco Delgado)' rockstinger
Mar 11 2005 5:09PM
0 0
profile picture
rodenski5
Posts: 384 - Karma: 10
I don't know if we did something wrong or what, but we mounted three 1' (I think) PVC pipes on a 2x4 and after about 5 runs there were chunks taken out of the PVC.
Mar 11 2005 5:52PM
0 0
profile picture
Lineskier-101
Posts: 7863 - Karma: 22
^^^It's only plastic. Try landing flater.
--------------------------------------
'Duran Duran bought Armada, Armada bought Microsoft, Microsoft bought MSP and AOL, AOL owns Time4 which owns the MountainSportsMedia which owns SKi, Skiing and RIP Freeze... so Armada now owns McDonalds and Coke. Have a coke and smile and wake the hell up with low low prices and Colombian Coffee (which Tanner owns a large portion of with his silent SouthAmerican partner Flaco Delgado)' rockstinger
Mar 11 2005 5:57PM
0 0
profile picture
FUUUCK
Posts: 18426 - Karma: 4,888
thanks a bunch, i think ill make one of those too
________________________________________

Jim_Borchardt: 'sorry this is a gay thread'

crazytom22: 'its cool man, just never post again'



say what?
Mar 11 2005 5:58PM
0 0
profile picture
o2bjedi
Posts: 480 - Karma: 20
cool, i made a small flat down PVP/wood rail few weeks ago
Mar 11 2005 6:06PM
0 0
profile picture
eastAR5
Posts: 15084 - Karma: 730
cool. you got any pics?
_______________________________________

*Welcome to the dub ski radio show*

$$$BOSTONBACKCOUNTRY$$$


Mar 11 2005 6:10PM
0 0
profile picture
Switchstyle
Posts: 1194 - Karma: 11
nice... thanks for putting this up...im gonna make one for some summer sessions.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

I wish I had super powers
Like being able to summon tasty cheese
But would I use it for good or evil?
I just don't know...
Mar 11 2005 7:10PM
0 0
profile picture
Nivrittam
Posts: 1667 - Karma: 21
hahah what a post whore
i like girls
Mar 11 2005 7:22PM
0 0
profile picture
Bregs
Posts: 633 - Karma: 21
yeah ive make about 5 differnt types of pvc/ wood rails. when you want to make a rainbow or roller coaster railt you have to use like 4-5 pieces of the tiny pvc so it will bend. and i works great. just becareful when screwing it in not to snap it from the pressure
Mar 11 2005 7:44PM
0 0
profile picture
ski@jaypeak2
Posts: 2800 - Karma: 394
i got a 16ft roller coaster and nutted my self on it today.


You can't hug with nuclear arms
Mar 11 2005 9:25PM
0 0
profile picture
nsnski240
Posts: 1623 - Karma: 15
^ what did you use under the PVC? a friend of mine bought this flewible deck shit and drilled it into that
------------>
Matt Hein - skiboarding legend
D BREES 101 Cult
Land Shark eeee eee eee

'Getting married for sex is like buying a Boeing 747 for peanuts'
Mar 12 2005 2:36PM
0 0
profile picture
LPT_311
Posts: 2239 - Karma: 12
pvc is fun








311 is the Fuckin Shit Mutha Fucka
Mar 12 2005 3:36PM
0 0
profile picture
parkskiertmr
Posts: 679 - Karma: 11
how do u make a kink with the pvc? thanks for the help


the gunshot holds no fear
Mar 12 2005 3:45PM
0 0
profile picture
Ryno
Posts: 31125 - Karma: 336
pvc is plastic so u have to ollie onto it really low so u dont land hard and force ur edge into the soft plastics.

i find if i wait until the snow gets packy, we just make support outta the snow, works good.



i know this is snowskating but the top 2 pics show what i mean by using snow as a support


___________________________________________________




A view on the downfall of the US by 221: 'godzilla man. he's gonna show up and shit will hit the fan.'



ellermann -> i hope you realize you just threw yourselves a birthday party online. just think about that for a little while



Ryan V.G



~~Phunkin Phatt Phreerider~~

Dragons Lair
Mar 12 2005 5:22PM
0 0
profile picture
TheProfitSkier
Posts: 3901 - Karma: 9
that wont work that well for skiing

Lil Sit 18: what the fuck
Lil Sit 18: your gay
silvercartelrdr: ski blading is gay
Lil Sit 18: ski bladdding the best
Mar 12 2005 5:25PM
0 0
profile picture
winterkid33
Posts: 2267 - Karma: 52
I have plans for a huge flat down rail outta flat stock metal prob 20-30- ft long. I just dont have anywhere I could use it. it soo annoying theres just no where to put it permanetly cause once that things in its not gonna be moved again. I have a 12ft straight box made with lexan its fun but pretty easy and gets old fast.
07' bitch
'Am I fighting to live or am I living to fight, what am I trying to see if there aint nothin in sight? why am I trying to give, if no one gives me a try? why am
Mar 12 2005 7:04PM
0 0
profile picture
eheath
Posts: 61100 - Karma: 118,256
PVC sucks



















'i think i'll go with shouldabeen for the first name and abeejay for the middle name, reguardless of if its a boy or girl'-CameIToeJam on what he would name his kids





i hate ski patrolers
Mar 12 2005 7:08PM
0 0
profile picture
00000000
Posts: 11075 - Karma: 82,508
even simpler, i bought a 12' long piece of outdoor wood, screw 3 milk crates underneather (front middle back) and voila, just make sure the wood slides well

'....a ninja skier probly came by and whacked him with his pole.... thats my guess' -nordas-
Mar 12 2005 7:08PM
0 0
profile picture
a.beezy
Posts: 4059 - Karma: 109
woohooo there are 2 in my backyard right now!!
_____________________________

'I'm not making it up, if there are two things i never do, it's lying about farting and making shit up' - TD



evenin' bitches
Mar 12 2005 8:45PM
0 0
profile picture
jib.chick
Posts: 64 - Karma: 10
this would be good for summer skiing.



Mar 31 2005 2:51PM
0 0
profile picture
iskindiana
Posts: 1149 - Karma: 19
yeah u can make a day of it.... buy your supplies to build the rail, go to ice rink get sum snow and seshion all night... its a good time, costly but a good time

Mar 31 2005 3:21PM
0 0
profile picture
RMillz
Posts: 693 - Karma: 61
yeah my friend made one with screws from bottom up
Jun 18 2008 12:50PM
0 0
profile picture
scott-skis
Posts: 1161 - Karma: 141
^ haha newb bump
Jun 18 2008 5:05PM
0 0
profile picture
BootySpunk.
Posts: 8148 - Karma: 84
Thats three bumps can someone ban this asshole already?
Jun 18 2008 5:08PM
0 0
profile picture
currentwestman
Posts: 3292 - Karma: 330
this is ironic
Jun 18 2008 5:21PM
0 0
profile picture
BootySpunk.
Posts: 8148 - Karma: 84
explain...

is it that I am falming someone for bumping threads but when I flame I am in turn bumping the thread too thus doing what I just flamed them for....hmmmmmmmmm very true I sorry
Jun 18 2008 5:23PM
0 0
profile picture
currentwestman
Posts: 3292 - Karma: 330
no i was actually referring to the "asshole" part
Jun 18 2008 5:58PM
0 0
profile picture
BootySpunk.
Posts: 8148 - Karma: 84
oh lol im not an asshole I just want to stop seeing these damn 2-6yr old threads haha
Jun 18 2008 6:03PM
0 0
profile picture
debrickshaw
Posts: 1957 - Karma: 68
Build a jib 101
Jun 18 2008 6:16PM
0 0
All times are Eastern (-4)