Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Anyone have a project car or truck they are building?

profile picture
SkiBum.
Posts: 3597 - Karma: 3,895






54’ Chevy 3 window I got few weekends back. Took me a while to find exactly what I wanted. Yanked it out of a field on some Indian reservation in Far East Utah.

Got to button up my home remodel first. But this winter I’ll dive into the truck. Will keep original pantina look but everything underneath and under hood will be new. More rat rod then OG look. I’ll find a small block and trans. Posi rear. Custom front and driveshaft. Will lower it some but will not be on bags. I’m excited to have a money pit but eventual awesome weekend Main Street summer cruiser.

**This thread was edited on May 13th 2019 at 2:37:21pm

**This thread was edited on May 13th 2019 at 2:39:23pm

**This thread was edited on May 13th 2019 at 2:40:55pm
May 13 2019 2:36PM
13 0
profile picture
SkiBum.
Posts: 3597 - Karma: 3,895
Well...idk how to add picture. So yeah...

Nevermind.

**This post was edited on May 13th 2019 at 2:41:11pm
May 13 2019 2:39PM
3 0
profile picture
oldmanski
Posts: 3080 - Karma: 21,724
Looks like a bad ass project!! Dig the idea of just leaving the paint the way it is, small block, auto trans, good geared rear end, dont forget to do some decent disc brakes on it(going to have to stop too). Ive got a little 72' GMC 1/2 ton I have owned for almost 25 years(First auto I owned) that I need to get out of storage and get some fresh fluids in. Would love to build a Rat Rod sometime, building an old Harley Shovelhead at the moment so that is taking some of the spare time and money at the moment. Good luck and I would like to see the progress as you go. Also, if you need a specialty part or anything, hit me up, I have a few connects that can get some of that old shit.
May 13 2019 2:54PM
2 0
profile picture
SkiBum.
Posts: 3597 - Karma: 3,895
oldmanskiLooks like a bad ass project!! Dig the idea of just leaving the paint the way it is, small block, auto trans, good geared rear end, dont forget to do some decent disc brakes on it(going to have to stop too). Ive got a little 72' GMC 1/2 ton I have owned for almost 25 years(First auto I owned) that I need to get out of storage and get some fresh fluids in. Would love to build a Rat Rod sometime, building an old Harley Shovelhead at the moment so that is taking some of the spare time and money at the moment. Good luck and I would like to see the progress as you go. Also, if you need a specialty part or anything, hit me up, I have a few connects that can get some of that old shit.


Yup, she will have disc breaks all around!

I have a 69’ c-10 long bed that i learned to drive on back in the sticks. 3 on the tree. Was going to originally restore that but it’s way to far gone. East coast truck and rust. This one has 1 rust spot about 4”x4” bottom door panel. Easy fix. Rest is surface rust. Things solid. I’m happy.

Good luck with the bike!
May 13 2019 3:05PM
1 0
profile picture
evaroni
Posts: 3895 - Karma: 3,774
I bought an 89’ f-150 when I wanted to drop out of high school. It was the single cab short bed with the 5.0 V8. Had the 2 tone red and tan paint. So I sanded it down and filled the dents and rust. About 20 cans of matte black duplicolor later all the guys at my school wanted a ride.
May 13 2019 6:11PM
3 0
profile picture
SendyMcSendyface
Posts: 2453 - Karma: 20,000
Dope ride dude. I'm goin out tomorrow to pick up a car I've been looking for for a long time. 1998 Volvo V70, factory stick. Gonna be my daily for now, but I'm gonna drop a turbo engine in it this summer, and do some more shit when I buy a truck next year. I'll post pics when I pick her up.
May 13 2019 7:57PM
3 0
profile picture
CalumSKI
Posts: 4121 - Karma: 23,046
one of my buddies has a brz as his project car
its going well i think
May 14 2019 8:50AM
1 0
profile picture
clorox
Posts: 1728 - Karma: 4,861
I have a 97 land cruiser that desperately needs rust repair in the rear end and has 287,XXX miles. Runs like a champ and even killed it off road with stock tires, but the rear suspension is fucked so highways and aggressive throttle is real sketch. Have also been looking at 1FZ-FE turbo kits on ebay that in theory would make some ridiculous power, though forced induction by way of a supercharger would probably be the more responsible way to go.


Has anyone ever tried twin charging by running a crank belt to the compressor wheel for the best of both worlds? Would probably be really difficult to do without a machine shop but maybe someone on this site knows a thing or two about manufacturing.
May 14 2019 9:48AM
0 0
profile picture
SendyMcSendyface
Posts: 2453 - Karma: 20,000
Here she is!
May 14 2019 4:14PM
12 0
profile picture
oldmanski
Posts: 3080 - Karma: 21,724
SendyMcSendyfaceHere she is!

Nice! Have to throw a rack on it for the goods and you are set!
May 14 2019 6:44PM
3 0
profile picture
bait
Posts: 1226 - Karma: 3,578
02 4x4 ford ranger for less than 2k is turning into a project truck. My daily (first and only) vehicle needs work done on a daily basis.

Brakes have locked up, floorpan rusted out (I can see the road)

Im running on a shoestring budget, and broke one of the leaves in the driver side rear spring. Is it it possible to weld back together with some bracing using a cheapo 120v 200a stick welder and some 6013?

Just hoping for it to last the summer.
May 14 2019 7:25PM
5 0
profile picture
oldmanski
Posts: 3080 - Karma: 21,724
bait02 4x4 ford ranger for less than 2k is turning into a project truck. My daily (first and only) vehicle needs work done on a daily basis.

Brakes have locked up, floorpan rusted out (I can see the road)

Im running on a shoestring budget, and broke one of the leaves in the driver side rear spring. Is it it possible to weld back together with some bracing using a cheapo 120v 200a stick welder and some 6013?

Just hoping for it to last the summer.


Where is it broke at?
May 14 2019 8:33PM
0 0
profile picture
bait
Posts: 1226 - Karma: 3,578
oldmanskiWhere is it broke at?


Second leaf down broke in clean in half about 10 inches back from the axle line
May 14 2019 8:39PM
0 0
profile picture
oldmanski
Posts: 3080 - Karma: 21,724
baitSecond leaf down broke in clean in half about 10 inches back from the axle line


2wd? Are you going to be doing off roading or just basic driving on paved roads? Basic driving you could just remove the loose spring and drive it(going to be a little bit soft on that side) but if you plan on taking it off any jumps,lol, or hauling anything heavy buy a used one off a junk yard and replace it.
May 14 2019 8:50PM
2 0
profile picture
bait
Posts: 1226 - Karma: 3,578
SendyMcSendyfaceHere she is!


From what I've hear these are mean sleepers

Ideal for tearing the shit out of a resort parking lot
May 15 2019 9:02AM
6 0
profile picture
SkiBum.
Posts: 3597 - Karma: 3,895
Update! Lots of work gets done so when you’re old lady leaves and you work from home cuz of corona flu

New front end in this past weekend. Just mocked and checked for alignment. Finish all the welding tomorrow probably now that’s it’s checked and good. Fully custom frame all finished. Rear suspension coming this week. Got a rear end already. Once that’s all complete and air ride in I’ll look for engine and trans!!!


let’s see if I can post a picture...




Mar 29 2020 8:56PM
6 0
profile picture
oldmanski
Posts: 3080 - Karma: 21,724
SkiBum.Update! Lots of work gets done so when you’re old lady leaves and you work from home cuz of corona flu

New front end in this past weekend. Just mocked and checked for alignment. Finish all the welding tomorrow probably now that’s it’s checked and good. Fully custom frame all finished. Rear suspension coming this week. Got a rear end already. Once that’s all complete and air ride in I’ll look for engine and trans!!!


let’s see if I can post a picture...





Looking Good! Looks like it will be low!
Mar 30 2020 11:15AM
1 0
profile picture
elcheapo
Posts: 3449 - Karma: 13,972
No vehicle but this boat is nickle and dimming me at the moment,

Mar 30 2020 1:06PM
5 0
profile picture
Evantheshredster
Posts: 429 - Karma: 935
my buddy has a 1984 saab 900 turbo 5spd manual that he got over the summer. it runs and drives but we’re doing some work on it and hope to get it restored fully
Mar 30 2020 3:03PM
3 0
profile picture
r00kie
Posts: 5193 - Karma: 58,788
Not mine but my 17 year old brother has and 82 Rabbit thats a pretty cool rolling project. He built the roof rack himself and also redid the timing and entire brake system himself. Sees old vdubs as a career path so good for him.
Mar 30 2020 3:30PM
15 0
profile picture
SkiBum.
Posts: 3597 - Karma: 3,895
Should have frame on ground when lowered all the way on air ride!
oldmanskiLooking Good! Looks like it will be low!
Mar 30 2020 6:45PM
1 0
profile picture
SkiBum.
Posts: 3597 - Karma: 3,895
TnskiNo vehicle but this boat is nickle and dimming me at the moment,



You know boat stands for Bill Out Another Thousand right? Haha, I worked in the marina business all through high school and college summers. Used to call those engines EverScreweds. Good luck, boats can be projects and a half!!
Mar 30 2020 6:47PM
2 0
profile picture
elcheapo
Posts: 3449 - Karma: 13,972
78 70 hp evinrude probably the most reliable outboard, I had the same one a while ago and went out hundreds of times with no issues the boat's another issue, pretty solid just lots of little things so yea b.o.a.t.
SkiBum.You know boat stands for Bill Out Another Thousand right? Haha, I worked in the marina business all through high school and college summers. Used to call those engines EverScreweds. Good luck, boats can be projects and a half!!
Mar 30 2020 7:03PM
3 0
profile picture
SkiBum.
Posts: 3597 - Karma: 3,895
Progress











Apr 4 2020 7:27PM
7 0
profile picture
=JP=
Posts: 53 - Karma: 295
Doing it right. Looks good so far!

**This post was edited on Dec 30th 2020 at 12:07:06pm
Apr 4 2020 11:50PM
1 0
profile picture
holytoast
Posts: 683 - Karma: 301
finderI have a 97 land cruiser that desperately needs rust repair in the rear end and has 287,XXX miles. Runs like a champ and even killed it off road with stock tires, but the rear suspension is fucked so highways and aggressive throttle is real sketch. Have also been looking at 1FZ-FE turbo kits on ebay that in theory would make some ridiculous power, though forced induction by way of a supercharger would probably be the more responsible way to go.


Has anyone ever tried twin charging by running a crank belt to the compressor wheel for the best of both worlds? Would probably be really difficult to do without a machine shop but maybe someone on this site knows a thing or two about manufacturing.U

Used to have a 97, i have a 2003 now. Never reached that mileage on the 97. Right now i have 2003 with ~245,000 miles. Ive had the same wheels since 03 so im looking at wheels rn. LC gang gang
Apr 5 2020 3:31AM
2 0
profile picture
little1337
Posts: 8158 - Karma: 45,761
SkiBum.Progress













Thats sick, Are you gonna paint it? I kind of like it with all the exposed rust
Apr 5 2020 12:05PM
1 0
profile picture
SkiBum.
Posts: 3597 - Karma: 3,895
little1337Thats sick, Are you gonna paint it? I kind of like it with all the exposed rust


Nope, it’s like a sin to paint a original pantina truck like this. I actually searched a long time to find one in this shape with that pantina.
Apr 5 2020 12:36PM
3 0
profile picture
G_B
Posts: 786 - Karma: 3,006
I have a ‘72 C10, has a 350 v8 now. Redoing the suspension with some qa1 goodies and painting the frame now, and getting ready to put a 5.3 or 6.0 LS and a 4L80e in. Going for a similar look of a hot rod type build. Love your patina, mine was a Kansas farm truck so it has some patina you can see up close but not nearly as spectacular as the paint job nature put on your truck.
Apr 6 2020 12:21PM
2 0
profile picture
oldmanski
Posts: 3080 - Karma: 21,724
G_BI have a ‘72 C10, has a 350 v8 now. Redoing the suspension with some qa1 goodies and painting the frame now, and getting ready to put a 5.3 or 6.0 LS and a 4L80e in. Going for a similar look of a hot rod type build. Love your patina, mine was a Kansas farm truck so it has some patina you can see up close but not nearly as spectacular as the paint job nature put on your truck.

Good looking truck!! Is it a Cheyenne? Factory AC, tilt, bucket seats? I have owned a few of these through the years and still have a little orange GMC very similar to yours.
Apr 6 2020 12:27PM
0 0
profile picture
G_B
Posts: 786 - Karma: 3,006
Yup it’s a Cheyenne, all of the things you said like factory ac and tilt. I would keep it stock and rebuild the 350 but I’ve been learning about tuning and want to apply it. Also I just picked up a one owner 87 gmc with a crazy patina that’s going to get a turbo or two, which should be a blast
oldmanskiGood looking truck!! Is it a Cheyenne? Factory AC, tilt, bucket seats? I have owned a few of these through the years and still have a little orange GMC very similar to yours.
Apr 6 2020 12:31PM
1 0
profile picture
SkiBum.
Posts: 3597 - Karma: 3,895
G_BI have a ‘72 C10, has a 350 v8 now. Redoing the suspension with some qa1 goodies and painting the frame now, and getting ready to put a 5.3 or 6.0 LS and a 4L80e in. Going for a similar look of a hot rod type build. Love your patina, mine was a Kansas farm truck so it has some patina you can see up close but not nearly as spectacular as the paint job nature put on your truck.


That thing looks good!! I have a 69’ c-10 long bed back home where I grew up. Was gonna restore that but she’s to far gone.


LS motor will be nice in that. I was always amazed at how big the engine bays are on those trucks. Sky is the limit for a motor!!!
Apr 6 2020 1:26PM
1 0
profile picture
SkiBum.
Posts: 3597 - Karma: 3,895
If ya live anywhere near Utah and want to sell that small block...
G_BYup it’s a Cheyenne, all of the things you said like factory ac and tilt. I would keep it stock and rebuild the 350 but I’ve been learning about tuning and want to apply it. Also I just picked up a one owner 87 gmc with a crazy patina that’s going to get a turbo or two, which should be a blast
Apr 6 2020 1:29PM
0 0
profile picture
oldmanski
Posts: 3080 - Karma: 21,724
G_BYup it’s a Cheyenne, all of the things you said like factory ac and tilt. I would keep it stock and rebuild the 350 but I’ve been learning about tuning and want to apply it. Also I just picked up a one owner 87 gmc with a crazy patina that’s going to get a turbo or two, which should be a blast


Nice, if you want to make it a good daily driver, the LS is a good swap. Have fun working on them and happy hot rodding!
Apr 6 2020 1:51PM
0 0
profile picture
BedBugDoug
Posts: 590 - Karma: 2,253
That patina is perfect, I'm in awe. Why no bags though?
Apr 6 2020 3:17PM
1 0
profile picture
SkiBum.
Posts: 3597 - Karma: 3,895
It is on bags. Front and rear. Will sit in frame
BedBugDougThat patina is perfect, I'm in awe. Why no bags though?
Apr 6 2020 3:19PM
0 0
profile picture
first_rodeo
Posts: 2383 - Karma: 7,764
Just

Empty

Every

Pocket
Apr 6 2020 4:11PM
0 0
profile picture
CalumSKI
Posts: 4121 - Karma: 23,046
r00kieNot mine but my 17 year old brother has and 82 Rabbit thats a pretty cool rolling project. He built the roof rack himself and also redid the timing and entire brake system himself. Sees old vdubs as a career path so good for him.


aw hell ya dude
Apr 6 2020 7:48PM
1 0
profile picture
SkiBum.
Posts: 3597 - Karma: 3,895


Got me an engine and trans for a sweet deal. Will clean it all up and put some pretty parts on it and dump it in when ready!
Apr 17 2020 11:26AM
3 0
profile picture
elcheapo
Posts: 3449 - Karma: 13,972
Fixing some dry rot this weekend and replacing a thru hull then it's done enough

Apr 17 2020 12:45PM
2 0
profile picture
SkiBum.
Posts: 3597 - Karma: 3,895


I need a bigger garage.
Apr 18 2020 3:16PM
4 0
profile picture
iFlip
Posts: 4541 - Karma: 19,088
TnskiFixing some dry rot this weekend and replacing a thru hull then it's done enough



Would you please post a pic of the thru-hull repair?
Apr 18 2020 4:25PM
0 0
profile picture
ucberzerkeley
Posts: 135 - Karma: 204
making me miss my old land cruiser
Apr 18 2020 5:44PM
0 0
profile picture
elcheapo
Posts: 3449 - Karma: 13,972
iFlipWould you please post a pic of the thru-hull repair?

Not much to show just a hole in the bottom of my boat and the part that goes in it. Basically plugging up the hole instead of fiberglassing it over.




Apr 18 2020 10:02PM
2 0
profile picture
iFlip
Posts: 4541 - Karma: 19,088
TnskiNot much to show just a hole in the bottom of my boat and the part that goes in it. Basically plugging up the hole instead of fiberglassing it over.


Thanks. Why did you decide to plug it instead of maintaining the thru-hull and whatever iy was used for? I'm working on a thru-hull on a boat of mine right now.
Apr 18 2020 10:29PM
0 0
profile picture
elcheapo
Posts: 3449 - Karma: 13,972
It had a leaky valve on it that I couldn't get off so I just ground it off and started with new stuff
iFlipThanks. Why did you decide to plug it instead of maintaining the thru-hull and whatever iy was used for? I'm working on a thru-hull on a boat of mine right now.
Apr 18 2020 10:31PM
3 0
profile picture
SkiBum.
Posts: 3597 - Karma: 3,895
Have not posted in here for a while. She’s getting close to done.

She runs. Idols great. Engine is 400 small block. New headers, custom exhaust, all new starter, alternator, belts and pulleys, distributor, carb, radiator, etc...



https://www.newschoolers.com/videos/watch/986498/trim-F4F68F03-A09F-4006-9126-AF20F9DBD164-MOV
Dec 30 2020 10:24AM
6 0
profile picture
SkiBum.
Posts: 3597 - Karma: 3,895
Interior getting there.


Dec 30 2020 10:27AM
7 0
profile picture
oldmanski
Posts: 3080 - Karma: 21,724
Dig the progress! You have been busy with it!
Dec 30 2020 10:36AM
2 0
profile picture
SkiBum.
Posts: 3597 - Karma: 3,895
Need to have her ready for spring! That’s the goal
oldmanskiDig the progress! You have been busy with it!
Dec 30 2020 10:49AM
2 0
profile picture
Charlie_Kelly
Posts: 11953 - Karma: 12,292
My 2016 GTI is my project and my daily.
Dec 30 2020 11:34AM
1 0
All times are Eastern (-4)