Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Landing switch ejects me out of bindings

profile picture
Prune
Posts: 111 - Karma: 137
I have some marker squire bindings got em for $120 CAD at my local know nothing about skiing sport chek. what do i do to fix this.. :(
Sep 13 2018 8:52PM
4 0
profile picture
-eREKTion-
Posts: 1478 - Karma: 9,246
Take them to someone knowledgeable. There's a lot of things this could be but without being able to mess with the bindings, nobody can give you any real answers.
Sep 13 2018 9:43PM
4 0
profile picture
AGOF
Posts: 2038 - Karma: 3,602
schlongpong74marker squire bindings


Found your problem
Sep 13 2018 11:09PM
8 0
profile picture
Magnuse
Posts: 10 - Karma: 67
AGOFFound your problem


It's true.. squire are made for women/kids.
If I were you I would try to sell them before they break and then buy something else.. I had some as well and they pretty much exploded off my ski after landing switch off a rail ans not even a jump..
Sep 14 2018 1:10AM
3 1
profile picture
chicken
Posts: 6843 - Karma: 2,122
get new bindings. expect to pay double what you paid for your squires. griffons will have the same hold pattern.
Sep 14 2018 1:20AM
3 0
profile picture
Cade2
Posts: 2124 - Karma: 2,704
Rick mcrank those bindings
Sep 14 2018 3:46PM
1 2
profile picture
Toast
Posts: 42 - Karma: 249
Tighten those dins
Sep 14 2018 3:51PM
0 2
profile picture
hot.pocket
Posts: 4197 - Karma: 10,366
Cade2Rick mcrank those bindings


Erikcass7Tighten those dins


Sep 14 2018 5:36PM
9 0
profile picture
Non_State_Actor
Posts: 4598 - Karma: 15,959
Cade2Rick mcrank those bindings


Erikcass7Tighten those dins


Seriously, if you do this on squires I'm led to believe the heel pieces will simply explode...is this true?
Sep 15 2018 2:09AM
2 0
profile picture
spencer.culver.1
Posts: 5 - Karma: 4
Too much pressure if you tighten everything. It will either just pop you out due to the pressure or you won't pop out at all and break a leg... Buy proper binding (pivot 16 or 18)
Sep 15 2018 11:52AM
0 8
profile picture
Caucasian_Asian
Posts: 2447 - Karma: 1,665
schlongpong74sport chek :(


-eREKTion-Take them to someone knowledgeable. There's a lot of things this could be but without being able to mess with the bindings, nobody can give you any real answers.


This is the best answer. Take your skis and boots to a proper ski shop and have them take a look. They may not be adjusted properly, or you may be over skiing them and require a better pair of bindings.

Oh, and don't just go and buy a pair of Pivot 18s because some kid on the internet said so.
Sep 15 2018 1:04PM
8 2
profile picture
-eREKTion-
Posts: 1478 - Karma: 9,246
Caucasian_AsianThis is the best answer. Take your skis and boots to a proper ski shop and have them take a look. They may not be adjusted properly, or you may be over skiing them and require a better pair of bindings.

Oh, and don't just go and buy a pair of Pivot 18s because some kid on the internet said so.


For real, there's a 99.99% chance that forward pressure is jacked up but OP needs to go to a shop.
Sep 15 2018 2:02PM
2 0
profile picture
Prune
Posts: 111 - Karma: 137
MagnuseIt's true.. squire are made for women/kids.
If I were you I would try to sell them before they break and then buy something else.. I had some as well and they pretty much exploded off my ski after landing switch off a rail ans not even a jump..


uh oh
Sep 16 2018 2:14PM
0 0
profile picture
CT_CREW
Posts: 655 - Karma: 3,431
I would guess that the brakes flex down into the snow from the overload of force on the cheap binding. when you are landing switch and this happens bad things ensue.
Sep 16 2018 3:51PM
0 0
profile picture
Toast
Posts: 42 - Karma: 249
mystery3Seriously, if you do this on squires I'm led to believe the heel pieces will simply explode...is this true?


Fuck no 😂 They aren’t gonna sell a binding that blows up.. I have a pair of squires and altough I don’t love em they get the job done
Sep 17 2018 1:35AM
2 2
profile picture
Finito
Posts: 88 - Karma: 330
I have squires aswell and no problems with them. Take them to a shop
Sep 17 2018 7:53AM
2 1
profile picture
OregonDead
Posts: 6789 - Karma: 23,498
Caucasian_AsianThis is the best answer. Take your skis and boots to a proper ski shop and have them take a look. They may not be adjusted properly, or you may be over skiing them and require a better pair of bindings.

Oh, and don't just go and buy a pair of Pivot 18s because some kid on the internet said so.


-eREKTion-For real, there's a 99.99% chance that forward pressure is jacked up but OP needs to go to a shop.


Erikcass7Fuck no 😂 They aren’t gonna sell a binding that blows up.. I have a pair of squires and altough I don’t love em they get the job done


Benny.310I have squires aswell and no problems with them. Take them to a shop


All of this OP. Pretty new bindings are gonna be fine if they are set up right. I've had shops mess up my bindings and I've also been in situations where I was like g*#$ d$*% binding should not have released and then I later realized that it was the way I skied and/or landed and the binding was actually put into a situation where it should have released. Just get your stuff checked out and then you can be confident.
Sep 17 2018 2:15PM
0 0
profile picture
BackWoods420
Posts: 234 - Karma: 450
I had the same issue on Tyrolia Attack 11s. Took them to a ski shop and they said the forward pressure was messed up.
I just switched to Pivot 14s, since the skis I was riding on the 11s were starting to delam anyways.
Sep 18 2018 3:06PM
0 0
profile picture
Prune
Posts: 111 - Karma: 137
jfang2799I had the same issue on Tyrolia Attack 11s. Took them to a ski shop and they said the forward pressure was messed up.
I just switched to Pivot 14s, since the skis I was riding on the 11s were starting to delam anyways.


Ok nice to know. Thx
Sep 18 2018 10:13PM
0 0
profile picture
clorox
Posts: 1728 - Karma: 4,861
**I am not a shop technician and my recommendation is only for diagnosis**

The way to check forward pressure on marker royals is to check the screw for sliding the heel piece. It should be flush with the plastic surrounding it, not sticking out, and not sitting deep inside. The other thing to check is the afd height. They way I set mine is by sliding a business card in there and getting it snug against the boots toe piece. I do this for my Jester pro's, which do not have a sliding afd, and the squires may allow this to be tighter because it will slide with your boot anyway.

PSA I have yet to break my orange fks 18's that I bought in 2015, I just hope I don't eject switch, fks brakes are a bitch to replace, cause you have to pull the entire heel piece out of the ski, and they're still like $70 to replace.
Sep 19 2018 12:10AM
0 0
All times are Eastern (-4)