Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Fks binding problem

profile picture
f100prerunner
Posts: 504 - Karma: 1,313
Hey guys, one of my heel pieces on both sides of the assembly has some play where the brake assembly connects to the actual metal plastic spring assembly that holds your boot in. It’s right between where the DIN assembly connects to the brake assembly arms right beneath the forward pressure screws. The whole din assembly actually wiggles and has a bit of room as if you were to be able to tighten the forward pressure screws in more...but not the actual forward pressure since that adjusts lower on the arm if that makes sense.
Aug 15 2018 10:41PM
1 0
profile picture
f100prerunner
Posts: 504 - Karma: 1,313

Here’s a photo of where the play is...I’ve tried tightening the forward pressure screws even more but can’t seem to...the forward pressure on the other side of the rod even seem to be seized up, any advice?
Aug 15 2018 10:53PM
0 0
profile picture
f100prerunner
Posts: 504 - Karma: 1,313
Anyone?
Aug 20 2018 9:52PM
0 0
profile picture
-eREKTion-
Posts: 1477 - Karma: 9,241
Get them torque tested.
Aug 21 2018 12:00AM
0 0
profile picture
f100prerunner
Posts: 504 - Karma: 1,313
-eREKTion-Get them torque tested.


I was thinking this would probably be a waste of time since I know the play isn’t supposed to be there though correct?
Aug 21 2018 1:21AM
0 0
profile picture
-eREKTion-
Posts: 1477 - Karma: 9,241
f100prerunnerI was thinking this would probably be a waste of time since I know the play isn’t supposed to be there though correct?


The play isn't supposed to be there but the bindings probably still function correctly, you'll just need to check that they're releasing at the right values.
Aug 21 2018 1:47AM
1 0
profile picture
f100prerunner
Posts: 504 - Karma: 1,313
Got it, thanks
Aug 21 2018 1:49AM
0 0
profile picture
f100prerunner
Posts: 504 - Karma: 1,313
Will get around to torque testing but if anyone has a legit fix please let me know. thanks.
Aug 21 2018 11:54PM
0 0
profile picture
Rockhound
Posts: 3432 - Karma: 851
-eREKTion-The play isn't supposed to be there but the bindings probably still function correctly, you'll just need to check that they're releasing at the right values.

This
Aug 25 2018 12:43AM
0 0
profile picture
Zypher
Posts: 2336 - Karma: 2,268
After use and a bit of abuse, you will get dildo play. I have 3 pairs of pivots and they all have a bit of play in them. That being said they still release at the correct values and wont budge from the binding plate itself when yanked at so Im calling em good. Any shop will probably be able to release test them for free if you bring the sticks in.
Aug 30 2018 12:49AM
0 0
profile picture
mattm7
Posts: 355 - Karma: 1,976
ZypherAfter use and a bit of abuse, you will get dildo play.

Hahaha
Aug 30 2018 6:49AM
0 0
All times are Eastern (-4)