So my homie and his shop taught me how to mount and use a jig mounted up a pair of skis while I was in hood. I knew the older jigs dont fit some newer park skis so I grabbed a old ski and put the jig on it fits so I was stoked and go to take it off and felt the one handle go loose and It just pops off and now I can't get it back on properly. Anyone knows how to get it back on I'd appreciate.
Haven't ever had a handle fall off a jig before so not sure of a good way to fix it, but if you can still just pull the clamps on that side apart it'll definitely still be usable, just a hassle to adjust. Maybe try setting it up for the boot length first then work on getting it set straight on your mount point on the ski. I always run a piece of masking tape straight across the mount point so you've got a full straight line to level it against.