Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Din on marker griffons

profile picture
lildicey
Posts: 27 - Karma: 109
Just got some marker griffons on my skis and the dins havent been changed. should i take them to the shop or is adjusting din something i should just do at home?
Sep 5 2015 11:54AM
16 6
profile picture
tomPietrowski
Posts: 7099 - Karma: 17,038
Do you know what your din should be? Regardless it's probably best to go to a shop, take your boot and make sure the forward pressure and afd have been set correctly.
Sep 5 2015 12:12PM
3 0
profile picture
lildicey
Posts: 27 - Karma: 109
tomPietrowskiDo you know what your din should be? Regardless it's probably best to go to a shop, take your boot and make sure the forward pressure and afd have been set correctly.


I used this site http://www.dinsetting.com/index.htm and it told me i'm 7. Does this mean I set both the toe and heel piece to 7? Where do the forward pressure and afd come in?
Sep 5 2015 12:26PM
0 1
profile picture
Swandog7
Posts: 4955 - Karma: 9,019
lildiceyI used this site http://www.dinsetting.com/index.htm and it told me i'm 7. Does this mean I set both the toe and heel piece to 7? Where do the forward pressure and afd come in?


A lot of those sites set the din based off of weight and stuff. Also, for mountain skiers, not park skiers. I tend to set mine a little higher than. Those just because they don't account for big landings and stuff like that
Sep 5 2015 12:30PM
0 2
profile picture
lildicey
Posts: 27 - Karma: 109
Swandog7A lot of those sites set the din based off of weight and stuff. Also, for mountain skiers, not park skiers. I tend to set mine a little higher than. Those just because they don't account for big landings and stuff like that


cool. i guess ill do that. are heel and toe din always the same? also, what do forward lean and twist mean in this chart http://www.dinsetting.com/dinchart.htm
Sep 5 2015 12:34PM
0 1
profile picture
DominatorJacques
Posts: 11228 - Karma: 76,275
Don't go set them too tight. You take much more risk of season ending injury and a visit to the operating room.

As said above forward pressure and toe adjustment must be set correctly for any binding to work right. If you don't totally understand, take them to a pro.
Sep 5 2015 12:41PM
2 0
profile picture
Chaka
Posts: 424 - Karma: 79
A professional at a shop would be able to answer all of your questions and make sure your boots and bindings are ready to go for a small amount of money. If you have to ask then you shouldn't be adjusting your own bindings.
Sep 5 2015 12:52PM
3 0
profile picture
Swandog7
Posts: 4955 - Karma: 9,019
ChakaA professional at a shop would be able to answer all of your questions and make sure your boots and bindings are ready to go for a small amount of money. If you have to ask then you shouldn't be adjusting your own bindings.


This. Just go to a shop. Also, your are better off having them too loose, then adjust them as needed, than having them too tight and not pooping out.
Sep 5 2015 1:06PM
2 0
profile picture
McLS
Posts: 1980 - Karma: 6,446
din depends on how much you weight, but mostly on how big you go in the park. The shop initialy set mine at 6 when they mounted it, and I put them up to 8.5 after a few days, so that they didn't pop off overtime I landed a medium jumps. I change em to 9.5/10 for bigger jumps too. You can definitely change the din yourself, just get a screwdriver and you're set.
Sep 6 2015 6:47AM
2 1
profile picture
tomPietrowski
Posts: 7099 - Karma: 17,038
lildiceyI used this site http://www.dinsetting.com/index.htm and it told me i'm 7. Does this mean I set both the toe and heel piece to 7? Where do the forward pressure and afd come in?


If tey are a new binding you would set the heel and toe the same. Only if they were worn and the springs were not giving correct release may you want to set them differently.

Forward rds pressure is the force the heel puts on the toe to ensure the boot is held in place.

The afd is the part the toe of the boot sits on. I the griffon it's mounted on an angled ramp so you need to adjust it so it almost touches the sole.

If those two are not set correctly then the din setting will not be accurate.

Take ke the skis an one boot to a shop an just have them set them up. It really is the safest option.
Sep 6 2015 2:42PM
2 0
profile picture
rozboon
Posts: 1642 - Karma: 868
If you have to ask these questions, you are not competent to be doing anything with a binding. Take them to a shop.
Sep 6 2015 9:18PM
0 0
profile picture
Zurg
Posts: 1486 - Karma: 4,701
Shop shop shop shop shop!
Sep 10 2015 10:51PM
0 0
All times are Eastern (-4)