Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Ski tuning :peeling back the sidewall

profile picture
shin-bang
Posts: 4100 - Karma: 6,992
so basically im tuning my skis and i have all the right stuff and i know how to do it. (1 degree base guide, files, diamond stones, waxing kit, the whole nine yards) i basically need my sidewalls peeled back just a bit. ive seen videos of shops doing this when they tune your skis, but is their any way i can do this at home? any help is appreciated and k+ to good answers
POLL
Edit Poll
Votes:

Take care when editing a poll; Options should be similar to maintain vote integrity.

More options will be added automatically as you type. You must supply a question and at least two options. No HTML is allowed.

Jul 31 2014 7:50PM
7 1
profile picture
shin-bang
Posts: 4100 - Karma: 6,992
the tool thats used is called a side wall planer (duh) but i just dont have the money to buy one. is their any other way?
Jul 31 2014 8:01PM
0 0
profile picture
RudyGarmisch
Posts: 25443 - Karma: 13,844
Anything that chews plastic can take it off, so even a belt sander would work. However, for clean edges, its got to be cut with some sort of blade/planer, and it has to be 90 degrees to the base for best results. A wood planer and a homemade jig that holds it while riding along the base perhaps?
Jul 31 2014 8:18PM
0 0
profile picture
tomPietrowski
Posts: 7099 - Karma: 17,038
The thing to remember with tuning at home is you will not be able to do it all so don't try. Have a shop do the parts you can't. There is no way you could base hrinf and restructure at home so I like to get big work like this done first and then I'll finish off the edges and waxing.
Jul 31 2014 8:26PM
5 1
profile picture
tomPietrowski
Posts: 7099 - Karma: 17,038
tomPietrowskiThe thing to remember with tuning at home is you will not be able to do it all so don't try. Have a shop do the parts you can't. There is no way you could base hrinf and restructure at home so I like to get big work like this done first and then I'll finish off the edges and waxing.


Not sure why this was down voted so I'll try to explain again. With tuning at home you can only ever do so much. There just is no way to base grind, stone grind ect at home. People have tried belt sanders ect but more often then not it ruins the skis. So for the parts you can not do at home such as resurfacing te sidewall in your case get a shop to do it. It's better to pay a little to get it done right then to attempt to do it at home an end up fucking your skis.

Waxing and edgeing I will always do at home but you just need to be realistic in what you can and can't achieve at home.
Jul 31 2014 11:47PM
2 0
profile picture
Caucasian_Asian
Posts: 2447 - Karma: 1,665
Use at your own risk


https://www.newschoolers.com/videos/watch/800001/The-Q-and-P
Aug 1 2014 9:18AM
0 0
profile picture
LC.
Posts: 5952 - Karma: 2,423
A handheld bastard file works fine for sidewalls. Easiest with a piece about 4-6 inches long, so chop your old one in half for stuff like this and treat yourself to a new one for base work.
Aug 1 2014 11:30AM
0 0
profile picture
skier58284
Posts: 1705 - Karma: 5,365
I don't tune my skis because I live in an apartment and don't have much space to set up a ski bench. When I have a house I will do most things myself.
Aug 1 2014 1:30PM
0 0
profile picture
shin-bang
Posts: 4100 - Karma: 6,992
Caucasian_AsianUse at your own risk


https://www.newschoolers.com/videos/watch/800001/The-Q-and-P


looks like thats how im gonna tune my rock skis from now on lol
Aug 1 2014 1:52PM
0 0
All times are Eastern (-4)