Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Is 18 fin binding to much for me?

profile picture
sam7136
Posts: 241 - Karma: 339
Hey.
I found a real good deal in some fks 180s. The only problem is I set my din about 8 and that's the minimum. I could also get done sth 12 drivers for the same price but I've heard the fks are a better binding. Plus k for help.
Thanks!!!!
Mar 13 2013 9:32PM
4 1
profile picture
DBL
Posts: 1404 - Karma: 2,211
If your asking its probably to much, but what is your height/weight/ability/terrain, and what skis?
Mar 13 2013 9:38PM
1 0
profile picture
profa_212
Posts: 8633 - Karma: 32,531
Yup...you Definately don't need those.
Mar 13 2013 9:41PM
0 1
profile picture
sam7136
Posts: 241 - Karma: 339
Well I know I don't need then I was just wondering if it would be a good idea. In 5"8 170 so I should probably use a higher din anyway
Mar 13 2013 9:44PM
1 0
profile picture
sam7136
Posts: 241 - Karma: 339
And skis are Icelantic danollies and I'm probably like intermediate park
Mar 13 2013 9:45PM
0 0
profile picture
hokkanee
Posts: 1800 - Karma: 435
Get a 14 din at most. No need for those
Mar 13 2013 9:46PM
0 0
profile picture
TheClap.
Posts: 21649 - Karma: 4,013
no
Mar 13 2013 9:52PM
0 0
profile picture
sam7136
Posts: 241 - Karma: 339
Alright il get the Sths. Thanks
Mar 13 2013 10:23PM
0 0
profile picture
Blake.P
Posts: 9894 - Karma: 3,585
no. im taller and lighter than you and i use that on my park skis, and pow skis only a little higher. you dont need to go higher
Mar 14 2013 12:41AM
0 0
profile picture
El_Barto.
Posts: 11630 - Karma: 24,465
If youre in the din range i dont see the big deal. If youre like at 7.5 id go for it, if your at 6.5 id opt for something else.

Mar 14 2013 12:46AM
0 0
profile picture
I_liketobutter
Posts: 2664 - Karma: 997
Can someone please make a sticky that says:

If you have to ask what bindings, you don't need 18 DIN.

I swear there's been 5 of these threads in the last week.
Mar 14 2013 1:01AM
0 0
profile picture
*ninja*
Posts: 2108 - Karma: 1,143
wait are the k2 twin tip skis good? :)
Mar 14 2013 1:03AM
0 0
profile picture
LC.
Posts: 5952 - Karma: 2,423
If it's an amazing deal then go for it. Don't listen to anyone who tells you that riding an 18 on 8 is a bad idea.
Mar 14 2013 4:31AM
0 0
profile picture
sam7136
Posts: 241 - Karma: 339
My question wasn't if I needed them my question was if it would be a good idea
Mar 14 2013 9:53AM
0 0
profile picture
LC.
Posts: 5952 - Karma: 2,423
It's a good idea if you can get them cheaper than any of: STH14, STH16, 997, FFG14, FFG16, Peak 15, Jester, FKS 14, Pivot 14.
Mar 14 2013 10:13AM
0 0
profile picture
ILLinoisance
Posts: 3527 - Karma: 5,398
If you're riding at a 7.5, realistically, you'd be fine with 10 DIN bindings, assuming you're not going to put them much higher. Anything more is kinda overkill, but the higher the DIN, a lot of the times means a higher quality and more durable binding.
Mar 14 2013 10:38AM
0 0
profile picture
seabs
Posts: 38 - Karma: 58
IF you found a good deal on them, then yes get them, assuming it's like the same price as these others you're looking at. it's an 8-18 so you'll be set for life.


Mar 14 2013 10:56AM
0 0
profile picture
Ehh...
Posts: 1897 - Karma: 1,423
18 din is pretty much unnecessary. Unless you are like a 7 foot 20 400lb pro skier.

I mean the din charts don't even go that high.
Mar 14 2013 12:09PM
0 0
profile picture
OhioDreams
Posts: 444 - Karma: 918
If you're riding at and 8 and describe yourself as an intermediate park skier, then I would say that that and 18 DIN turntable is indeed too much binding. While I love the FKS/Pivot, the STH/FFG series is my next favorite binding as both a skier and a ski tech. Whether you get the 12 or the 14 DIN version, make sure it is the driver featuring the driver toe. You don't want any of the Z toe wing release crap. The driver toe is a sold, durable, reliable to piece. I would go the Salomon route, I doubt you'll be disappointed.
Mar 14 2013 12:17PM
1 0
profile picture
El_Barto.
Posts: 11630 - Karma: 24,465
He'd be ok with a 10 din based on the spring only, i wouldnt trust z10s to hold me in even though im in their range. He'd also be fine with an 8-18 din binding.

Im at 7.5 and bought px15s because i wanted the metal driver toe. I had to turn my din up to 8, the minimum on the binding. Ive also been skiing harder this year to justify the beffier bindings. As long as hes in the din range he will be just fine.

I get that he will never use the majority of the din range but that doesnt matter. Most of us never come close to maxing out our din though.
Mar 14 2013 1:22PM
0 0
All times are Eastern (-4)