Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Look Px 12, Salomon STH12 or Rossignol freeski 200?????

profile picture
jibopoly23
Posts: 151 - Karma: 185
What set of bindings should i get? I've read the guide to what binding thread- which was very helpful- but can't decide between these three. I've heard some good reviews about the PX 12s. The sth12s are slightly cheaper, but not to sure about the quality of them. The rossignols are also a good bit more expensive than the other two.
I'm 5'10, 150lbs, ski predominately rails and boxes, apart from one week out of the year. I've just snapped both salomon bindings (Z10s? i think) that i had on my ar6s, and also broke my previous marker bindings, a ridiculous amount of times. not sure if that's down to me or shit bindings. Anyway i need a set of durable bindings, any advice would be appreciated +k.
Mar 7 2012 6:23PM
0 0
profile picture
rudager
Posts: 11332 - Karma: 4,597
Don't get the STH unless it is the driver toe. If it is, go with that
Mar 7 2012 6:44PM
0 0
profile picture
ballsofsteeze
Posts: 611 - Karma: 45
look px and rossi axial2 are the same binding, i don't know anything about the freeski 200, but i'm pretty sure its an 18 din binding, and i doubt you need an 18 din binding with your weight.
Mar 7 2012 7:22PM
0 0
profile picture
CDdesign
Posts: 1015 - Karma: 92
go with a mojo 12, or any head tyrolia binding... proven design by the worlds number one binding manufacture
Mar 7 2012 7:26PM
0 0
profile picture
jibopoly23
Posts: 151 - Karma: 185
Thanks.
Mar 9 2012 3:26AM
0 0
profile picture
BjornR
Posts: 141 - Karma: 14
I haven't seen mojo 12 in person but I'm sure that it's pure plastic. 15 and 18 are metal. If you ever held one of those you know thats quality.
Mar 9 2012 7:38AM
0 0
profile picture
VD.
Posts: 4054 - Karma: 4,564
Px12 over sth12oversize any day. Iuse the axail2 which as someone mentioned above is the same binding as the px12. In all honesty they're the best low din binding I've used, they seem pretty durable despite being lightweight also I've had more prerelease problems with marker jester16s than I have with axail2s/px12
Mar 9 2012 9:21AM
0 0
profile picture
jibopoly23
Posts: 151 - Karma: 185
Thanks everyone +k. The STH16 drivers have just been reduced to round about the same price as the px12s. Would that be a better choice? i noticed the din starts at 9 but, maybe a little high for my weight?
Mar 11 2012 9:32AM
0 0
profile picture
Dr0ck
Posts: 69 - Karma: 13
Well, theoretically if you set your dins at 9 you could use a 9-16 binding (I weigh 145 and mine are set at 8-9.). But, you don't need a binding with that high of a din. I would go px/axial 12 or sth DRIVER 12 either will serve you fine. I know nothing about the Tyrolias. If you google shopping px12s there are some out there for like 150-175$
Mar 11 2012 11:05AM
0 0
profile picture
rudager
Posts: 11332 - Karma: 4,597
They are your best bet. If you're worried about the din, look into the 14 Driver. I'll post a link of them on sale for $200 once I'm not on mobile
Mar 11 2012 11:06AM
0 0
profile picture
ballsofsteeze
Posts: 611 - Karma: 45
one to add: look pivots/rossi fks. I hear tons of good things about them, and they must be good to have a design basically unchanged for so many years. i personally have not used them yet, but i just got a pair to use next season on my new skis. any reviews i've heard of them say they are very durable. but like i said before , i have not used them personally yet, so if you are interested, talk to someone who knows more about them and has some experience with them.
Mar 11 2012 11:49AM
0 0
profile picture
jibopoly23
Posts: 151 - Karma: 185
Cheers. It's only the sth 16 drivers that are on sale the sth12 drivers are still the same price. So it's between the sth16 driver and look px 12. Thinking i'll probably get the sth 16s but. Thanks for everyone's help.
Mar 11 2012 1:09PM
0 0
profile picture
jibopoly23
Posts: 151 - Karma: 185
In fact there's probably no need for me to have a din that high, i usually don't have mine higher than 9 anyway. PX12's are probably a more appropriate choice and slightly cheaper, sorry for the dub post. Thanks to the guy who said he post the sth12 drivers for $200 but i live in the uk, shipping would be too expensive.
Mar 11 2012 1:20PM
0 0
profile picture
rudager
Posts: 11332 - Karma: 4,597
Ok: I've never had problems with the Px 12s, especially for someone my size, you'll like them, pretty solid
Mar 11 2012 1:21PM
0 0
profile picture
jibopoly23
Posts: 151 - Karma: 185
sorry one last question. The PX 12s are the wide brake 100m, i ride ar6s 85mm. Will this brake be too wide?
Mar 12 2012 7:28AM
0 0
profile picture
84west
Posts: 646 - Karma: 1,254
except you never want to have the spring maxed out in either direction, when there isn't any give, or in this case no resistance the binding doesn't do its job as well
Mar 12 2012 1:39PM
0 0
profile picture
jibopoly23
Posts: 151 - Karma: 185
Bump. Sorry but does anyone know if a 100mm brakes will be a problem on ar6s. I called the shop but the guy didn't know (ski tech wasn't in). Apparently the shop is about to sell out of px12s. Any advice would be much appreciated. Thanks.
Mar 12 2012 4:57PM
0 0
profile picture
rudager
Posts: 11332 - Karma: 4,597
You should be fine. If anything, ask around for brakes if they don't work
Mar 12 2012 4:58PM
0 0
profile picture
ballsofsteeze
Posts: 611 - Karma: 45
isn't this only at the top end of the din range? i think onenerdykid posted something to that effect. when it is maxed out there is no elasticity and the binding releases improperly. however, at the lowest setting, i believe he said it shouldn't be a problem. i'm not saying this is correct, i'm just paraphrasing his words (if i remember them correctly). if i'm wrong here, correct me onenerdykid.
Mar 13 2012 3:35PM
0 0
All times are Eastern (-4)