Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Painting fulltilt !?!?

profile picture
LeComfortable
Posts: 510 - Karma: 257
Hey guys I am pretty much bored of my red and white full tilt and i think i could paint them ! for the tongue i know it possible with RIT but for the rest of the boots how should i paint it ? spray paint ? would it stay ?

( Btw srry for my bad english i suck at english :/)
Feb 17 2012 7:25PM
0 0
profile picture
thegouda
Posts: 196 - Karma: 57
i spray painted my tele boots a couple years ago and the paint stayed on surprisingly well. i used like outdoor plastic patio furniture specific paint. if you lightly sandpaper the boots before you paint them the paint will stay a lot better
Feb 17 2012 7:29PM
0 0
profile picture
Billek
Posts: 5665 - Karma: 98
Sanding sanding, layers layers layers LAYERS...and I'm sure you'll be just fine.
Feb 17 2012 8:34PM
0 0
profile picture
steezeeepolizeee
Posts: 8756 - Karma: 796
hmmm If you took out the liner couldn't you just dunk the whole boot in RIT?

although i guess it could fuck up the little leather piece near the toe
Feb 17 2012 8:47PM
0 0
profile picture
s-hand
Posts: 1334 - Karma: 1,800
The only part of the boot that will actually take the dye is the tongues.  They are a different type/density of plastic.  I painted the rest of my boots and so far its holding up.  As already said, sanding and layers are key.  Be sure to use primer and a clearcoat too.  And primer.  Primer is important
Feb 17 2012 10:15PM
0 0
profile picture
Dmarc
Posts: 1035 - Karma: 83
u can also dye the back parts and im sure the rest of the boot someone on here dyed there tom wallisch hot doggers black
Feb 18 2012 2:42AM
0 0
profile picture
FreezerKid
Posts: 744 - Karma: 274
the shiny plastic (tounge and back bit) doesnt take rit dye my friend did his and only the late matte bid took the dye
Feb 18 2012 9:06AM
0 0
profile picture
LeComfortable
Posts: 510 - Karma: 257
thank to everyone ! :) gonna try this soon!
Feb 18 2012 10:47AM
0 0
profile picture
LeComfortable
Posts: 510 - Karma: 257
Hey guy so i start the job now i have 2 primer layer apply and 2black spray paint layer. but now i need to know such kind of clearcoat should i take. i know i need a outdoor one (well i don't think indoor will work) but wath brand should i but ?
Feb 21 2012 9:37PM
0 0
profile picture
LeComfortable
Posts: 510 - Karma: 257
buy*
Feb 21 2012 10:14PM
0 0
profile picture
LeComfortable
Posts: 510 - Karma: 257
bump i really need to know wath kind of clearcoat i need !
Feb 22 2012 5:33PM
0 0
profile picture
HaydenWrong
Posts: 986 - Karma: 2,165
spray paint will look good until you use them
Feb 22 2012 5:38PM
0 0
profile picture
Smilemon
Posts: 421 - Karma: 43
I have a pair of painted black hot doggers, and they lose a bit of paint every time I ride them :(
I bought them used and they were already painted. Sweet boots though.
Feb 22 2012 5:47PM
0 0
profile picture
LeComfortable
Posts: 510 - Karma: 257
well tha'ts why i want a clearcoat or any thing to put on it after the paintjob done ! anyone know ?
Feb 22 2012 7:07PM
0 0
profile picture
Shifties4Dayz
Posts: 1657 - Karma: 553
umm no. you cant dye a darker color with a lighter color
Feb 22 2012 7:11PM
0 0
profile picture
Dmarc
Posts: 1035 - Karma: 83
trust me i know i dye lax sticks all season long notice i said dye the RED part BLACK black=darker than red
Feb 22 2012 7:57PM
0 0
profile picture
Dmarc
Posts: 1035 - Karma: 83
sorry for the double post but what ever you do dont paint them they will chip and look like shit and here are the dyed hot doggers i was talking about and that the rest of the boot can take dye as long as you leave it in there long

Click for larger image
Feb 22 2012 8:05PM
0 0
profile picture
Crispy.
Posts: 6102 - Karma: 7,626
Those are so sick!
Feb 22 2012 8:20PM
0 0
profile picture
L-Dollo
Posts: 639 - Karma: 45
i talked to a guy that works at a shop that reps full tilts and he said when you dye the boot it changes the structure of the plastic and can make the book uncomfortable and break idk if that happened to the dyed ones above but just wanted to help +k please
Feb 22 2012 11:49PM
0 0
profile picture
BieberHole69
Posts: 1374 - Karma: 2,714
hahaha and my boots have made it into another thread. It's a shame I didn't see this thread before he painted his to give some advice. The RIT dye method worked out really well. Only minor fading around the heels and toes.
Feb 23 2012 1:25AM
0 0
profile picture
Dmarc
Posts: 1035 - Karma: 83
lol yea i just wantedto show him it was the best idea lol but im thinking about doing this to my hot doggers this summer maybe
Feb 23 2012 1:29AM
0 0
profile picture
Smilemon
Posts: 421 - Karma: 43
Those are sexy.
Feb 23 2012 1:37AM
0 0
profile picture
LeComfortable
Posts: 510 - Karma: 257
wow they are freaking awesome ! well i finish the paintjob ( gonna take picture tonight) but i was thinking redoing it this summer but i will dye them for sure!!!
Feb 23 2012 6:59AM
0 0
profile picture
Crispy.
Posts: 6102 - Karma: 7,626
Stoping asking for karma, the first 2 threads I've checked you have a bad response then you ask for karma. It'll come with quality posts.
Feb 23 2012 4:24PM
0 0
profile picture
LeComfortable
Posts: 510 - Karma: 257


so yeah it was pretty much just a test im kind of happy with this gonna see how long does it stay ! the Wu logo was just for fun to test if this could work XD but for the one who wanna do this use BLACK PRIMER !  and this summer i am gonna test dye on it :D

Click for larger imageClick for larger image
Feb 23 2012 5:18PM
0 0
profile picture
FreezerKid
Posts: 744 - Karma: 274
think they look better dyed, more sleek and smooth, nice job though want to make the drop kicks purple but think im gona wait till they more beat up before i do it
Feb 24 2012 9:05AM
0 0
profile picture
charlesacton
Posts: 215 - Karma: 786
looking sick bro!
Feb 25 2012 11:24AM
0 0
profile picture
jkauffman22
Posts: 2592 - Karma: 1,150
you can easily dye full tilt boots. I did my friends drops kicks like a month ago and turned em purple. The easiest way I've found, out of all my dying batches I've done on various things, is use a clean five gallon bucket when dealing with really big objects...like boots. Just heat a bunch of pots of water....get the right below boiling...pour them all in the bucket...add the dye...mix it...then put the object in and time it so you know how long to do the other one. Message me if you have any questions
Feb 29 2012 8:58PM
0 0
profile picture
k-fred
Posts: 5363 - Karma: 1,598
Click for larger image
Feb 29 2012 9:20PM
0 0
All times are Eastern (-4)