Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Cutting down poles & changing grip

profile picture
bnicholson
Posts: 178 - Karma: 245
okay so i got these 105's and wanna cut em down a little, i also wanna put that bike grip on it like the line poles, but i also wanna keep the wrist grips any ideas?
Jan 31 2011 9:57PM
0 0
profile picture
connory998
Posts: 1197 - Karma: 34
drill a hole through the top, cut holes in a set of straps and bolt them on.
Jan 31 2011 10:02PM
0 0
profile picture
DrZoidberg
Posts: 5675 - Karma: 4,268
Click for larger image

Basically, I put some tape around the pole to make the grip snug, the put some epoxy on and put them on for good. But first, I had to cut out a bit of material so I could feed the strap through, then I put the screw through top with a bit more epoxy to hold the strap in. It's easy.
Jan 31 2011 10:02PM
0 0
profile picture
bnicholson
Posts: 178 - Karma: 245
thanks and you just bolt it at the top right?
Jan 31 2011 10:07PM
0 0
profile picture
DrZoidberg
Posts: 5675 - Karma: 4,268
Well screw it at the top, buy yeah. Just make sure the screw has something to dig into. I filled the very top of the pole with epoxy (not the whole thing, obviously) so it would actually be in something instead of floating inside the pole.
Feb 1 2011 2:45PM
0 0
profile picture
J.J.M
Posts: 1464 - Karma: 58
threaddddsssss
Feb 1 2011 3:05PM
0 0
profile picture
Flacko
Posts: 1495 - Karma: 788

buy the skinest >BMX< bike grips u can find and use an extra fine hacksaw to cut them. why BMX grips? cus they are more grippy, are easer to get on and grip the metal so u wont need glue and they look sweet

Feb 1 2011 7:53PM
0 0
profile picture
quaive
Posts: 1055 - Karma: 99
Check 4FRNT Tech Talk, they made a video a while back on cutting your poles.
Feb 1 2011 7:58PM
0 0
All times are Eastern (-4)