Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Rail wax

profile picture
Surfacer_90
Posts: 48 - Karma: 15
I was wondering if anyone puts wax or anything on rails to make skis slide easier on it?

My friend and i just wire brushed and sanded it to remove the rust and nicks in the metal

is there anything else we need to do?
Nov 2 2010 11:41PM
0 0
profile picture
Ehh...
Posts: 1897 - Karma: 1,423
You can use candle wax but more times often than not it doesn't really matter. as long as you brushed it thats what really matters.
Nov 2 2010 11:46PM
0 0
profile picture
TheHuggyBear
Posts: 1762 - Karma: 313
Click for larger image

works like a charm
Nov 2 2010 11:46PM
0 0
profile picture
zerospinskier
Posts: 4867 - Karma: 350
I have that stuff. Shit is stupid. Each one sucks alone for each person. Then when you combine them, it just smells minty, that's it...
Nov 3 2010 1:40AM
0 0
profile picture
Tremblantskier
Posts: 943 - Karma: 5,409
Rub wax on the rail, any type will do. Rub on ski wax seems to work well on urban rails by why waste it when an old candle would do.
Nov 3 2010 3:00AM
0 0
profile picture
Bungholio
Posts: 973 - Karma: 5
i put this on my skis
[im]http://www.bellonoche.com/upload/Anal_Lube.jpg[/img]
Nov 3 2010 3:18AM
0 0
profile picture
Bungholio
Posts: 973 - Karma: 5
MOTHER FUCKER
Click for larger image
that was my first embed fail ever :O i prmise it will never happen again...
Nov 3 2010 3:18AM
0 0
profile picture
Static
Posts: 8491 - Karma: 4,059
at least it was an original joke
Nov 3 2010 3:20AM
0 0
profile picture
Mr.Huck
Posts: 6096 - Karma: 14,893
Neat idea, but most of us prefer putting our skis on our feet instead of up our butts.  Just sayin.

To OP.  I would use normal ski wax.  I went and bought warm weather Swix orange.  It works great on metal and PVC.  Makes it slide really consistent.  Using candle wax, WD-40 or other oil based products will screw up your bases.  Oil based products prevent the wax from soaking into your bases when you hot wax them. 

If they are just going to be your back yard jib skis, then it probably doesn't matter.  If you still want to ski on them in the winter, then use wax that won't screw up your bases.  
Nov 3 2010 3:10PM
0 0
profile picture
thebeesknees
Posts: 3660 - Karma: 160
for urban, swix is perfect.
Nov 3 2010 3:11PM
0 0
profile picture
Petey.
Posts: 5736 - Karma: 4,881
which kinds?
Nov 3 2010 3:40PM
0 0
profile picture
Mr.Huck
Posts: 6096 - Karma: 14,893
Ideally, you want wax to match air temp.  Swix Orange wax (the stuff that is used for hot waxing) is great for summer sessioning because it is for warmer temps.  It will be printed on the package what the temperature range is for each wax.  Just get the right wax based on temp and rub it on your rail as needed.  You'll notice a huge difference in the way it slides.
Nov 3 2010 4:07PM
0 0
profile picture
Ehh...
Posts: 1897 - Karma: 1,423
Don't mean the thread jack in anyway but do you wax pvc rails? I'm thinking no. but just wanted to make sure.
Nov 3 2010 4:53PM
0 0
profile picture
Petey.
Posts: 5736 - Karma: 4,881
Is it as simple as that? Just rub the wax onto the rail and bam?
Nov 3 2010 5:02PM
0 0
profile picture
brakes
Posts: 457 - Karma: 11
my threads, also looking for an answer to this question, I thought pvc didn't need wax?
Nov 3 2010 6:06PM
0 0
profile picture
Mr.Huck
Posts: 6096 - Karma: 14,893
Yes, BAM!!!  Just like that.  PVC or Metal, painted or not.  The wax makes everything slide better.  It helps prevent the paint from chipping off.  Because you slide better, it keeps your metal and PVC from getting burred up.
Nov 3 2010 6:15PM
0 0
profile picture
Ehh...
Posts: 1897 - Karma: 1,423
Thank you, it twas an answer i was looking for +k
Nov 3 2010 8:12PM
0 0
profile picture
J-Dunn
Posts: 1104 - Karma: 1,845
Yea wax helps. And cheap wax works. Go to walmart or meijer and pick up some gulf wax. Comes in a box with like four blocks and its like 3 bucks. Lasted me a whole ski season.
Nov 3 2010 9:01PM
0 0
profile picture
Parkrat10
Posts: 104 - Karma: 15
do you just rub candle wax on the rials and away you go?
Dec 22 2010 8:50PM
0 0
profile picture
FilipRules
Posts: 29 - Karma: 10
For PVC you dont need to wax it. I have done backyard jibs with PVC all the time and never waxed the PVC and it worked great.
Dec 22 2010 9:19PM
0 0
profile picture
Parkrat10
Posts: 104 - Karma: 15
what about rails?
Dec 22 2010 9:28PM
0 0
profile picture
Bungholio
Posts: 973 - Karma: 5
im part of that most of us, unlike you kid...
Dec 25 2010 12:45AM
0 0
profile picture
chardi
Posts: 5040 - Karma: 59
i lol'd hard at the "kid"
Dec 25 2010 12:51AM
0 0
profile picture
_steffen_
Posts: 903 - Karma: 124
lol dont use ski wax shits expensive. skate wax works excellent and is way cheap.if your really poor you can walk around your local skatepark picking up forgotten pieces for your summer set up
Dec 25 2010 12:57AM
0 0
profile picture
Peach.
Posts: 3879 - Karma: 933
Ski wax :

Better for your bases=worse for your wallet.

Gulf/skate/candle wax:

Better or your wallet worse for your bases.
Dec 25 2010 1:23AM
0 0
profile picture
Bungholio
Posts: 973 - Karma: 5
lolol thats a gamer thing :D
Dec 26 2010 12:53AM
0 0
profile picture
ski-racer
Posts: 60 - Karma: 11
a good old fashion hot scrape will keep your bases good no matter what is on the rails.  so buy the cheap stuff for the rails and use the good expensive stuff on your skis and you will be fine 
Dec 26 2010 1:34AM
0 0
profile picture
OrangeName
Posts: 675 - Karma: 15

i didnt know people wax metal rails.. i'd only think to wax the concrete rails and catchyR stuff. maybe wood too? ha

Dec 26 2010 1:41AM
0 0
profile picture
snowbombz
Posts: 2456 - Karma: 96
i do it and it actually works, it wares off pretty quickly though
Dec 26 2010 1:42AM
0 0
profile picture
canterbury
Posts: 2382 - Karma: 55
pretty sure that Mr.Huck was skiing before you were born, kid
Dec 26 2010 1:46AM
0 0
profile picture
Bungholio
Posts: 973 - Karma: 5
omfg lol you fail
Dec 26 2010 6:14AM
0 0
profile picture
Parkrat10
Posts: 104 - Karma: 15
i found a sick urban rail the other day, went up hit stop on it and ate shit went in a store bought a candle and rubed it on the rail and went up and ate shit again. how can i make it slide right?
Mar 2 2011 5:09PM
0 0
profile picture
wtmtss
Posts: 110 - Karma: 12
Its usually not necesarry but definitely can be. Spray on sunscreen does the trick to!
Mar 2 2011 5:18PM
0 0
profile picture
RJ_Res
Posts: 628 - Karma: 292
Is there are chance that it's aluminum?
Mar 2 2011 5:21PM
0 0
profile picture
broto
Posts: 9039 - Karma: 25,658
mr. huck is in his forties.
Mar 2 2011 5:21PM
0 0
profile picture
kinros14
Posts: 25 - Karma: 11
I do the same thing
Mar 2 2011 7:14PM
0 0
profile picture
StompinStraights
Posts: 136 - Karma: 32

I use vassaline and a couple tissues.

Awe shit wrong thread. I got all confused seeing the lube pics.

Mar 2 2011 7:34PM
0 0
profile picture
TOAST.
Posts: 7265 - Karma: 33,275
PAM
Mar 2 2011 9:23PM
0 0
profile picture
NickSki.
Posts: 2009 - Karma: 61
Quick question, What about rusted rails, what should i use on the rust? Wax?
Mar 2 2011 9:28PM
0 0
profile picture
StompinStraights
Posts: 136 - Karma: 32
Sand it, and theres this rust off stuff that comes in a can you can get at a hardware store. That would get most of the rust off.
Mar 2 2011 9:57PM
0 0
profile picture
jwv
Posts: 560 - Karma: 1,190
Sorry for the bump, but quick question, how bad does candle wax ruin your bases? Today I slid a pvc rail with candle wax about 6 times, are my bases gonna be pretty messed up? And also how can I go about getting the candle wax off the rail?
Jan 22 2013 8:19PM
0 0
profile picture
jwv
Posts: 560 - Karma: 1,190
Also they're my only skis so I don't want to mess them up too bad because I'll be using them on the hill.
Jan 22 2013 8:52PM
0 0
All times are Eastern (-4)