Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

FKS geze toepeice mounting.

profile picture
SHastatahoe
Posts: 3414 - Karma: 19
[img]4165427560_85c98bbfe9_o.jpg[/img]

So I picked these up from a craigslist sale. They are curve 180 FKS binders with a din of 14. anyways, the toepeice only has two insert screws.

My question is this; Do people have problems with toe pullout or anything with these? would they be ok to mount on new skis?

Thanks
Dec 6 2009 11:31PM
0 0
profile picture
BWalmer
Posts: 9141 - Karma: 12,883
A lot people LOVE the geze toe piece, I doubt they cause much pull out if that many people love them...
Dec 6 2009 11:37PM
0 0
profile picture
GNARBARSTAR
Posts: 639 - Karma: 16
it should have 3 or 4 screws, post a pic that works and i can help you
Dec 6 2009 11:50PM
0 0
profile picture
SHastatahoe
Posts: 3414 - Karma: 19
Click for larger image

Dec 7 2009 12:38AM
0 0
profile picture
jksl
Posts: 12726 - Karma: 737
i have two pairs with the geze toe and they both have the 4 screw hole pattern...are you somehow not seeing the other 2? hah
Dec 7 2009 1:11AM
0 0
profile picture
SHastatahoe
Posts: 3414 - Karma: 19
Probably. I just picked them up, they are at my parents house and when I was leaving tonight I snapped a picture of it. I couldnt see more screws, though I didnt spend a lot of time with them. It was not apparent, so I thought I would ask around. My other fks style binders are newer and have the cuts in the toe peice where you can screw them in. Are these hidden? or am I an idiot.
Dec 7 2009 1:24AM
0 0
profile picture
stickstompin
Posts: 564 - Karma: 24
There are 4 screws the two u can see in the pic and then when the yellow meets the black on the toe piece there are two on either side. I actuall think that there are little rubber pieces and the hole goes down through them.
Dec 7 2009 10:43AM
0 0
profile picture
stickstompin
Posts: 564 - Karma: 24

you can see them in this pic

Click for larger image

Dec 7 2009 10:46AM
0 0
profile picture
uni-corn
Posts: 13846 - Karma: 651
Yup, what he said right above me.... There are 2 rubber pieces right where the yellow meets the black right by the DIN window.... They somehow come up(use a flat screwdriver) and then VIOLA! There are screws 3 and 4.
Dec 7 2009 1:56PM
0 0
profile picture
SHastatahoe
Posts: 3414 - Karma: 19
Sweet guys, I will try this when I go back to my parents house this weekend. I will post success or failure.
Dec 7 2009 2:07PM
0 0
profile picture
FNJ
Posts: 3026 - Karma: 110
mine have three, the third one is in the front middle, it is a like a big disc that you screw in before hand then slide the toe piece on it,
Dec 7 2009 3:48PM
0 0
profile picture
GNARBARSTAR
Posts: 639 - Karma: 16
yeah that looks like a 3 screw take the 2 screws out that you can see and pull the toe piece back towards the tail of the ski it should slide back exposing the third screw underneath.
Dec 7 2009 4:44PM
0 0
profile picture
no_steeze
Posts: 23992 - Karma: 4,267
nope that's the pair with the 3rd screw in the middle, you undo the bottom 2 and then twist the toe off

someone on tgr made a geze template i think if your shop no longer has a jig for mounting 3 screw geze
Dec 7 2009 4:52PM
0 0
profile picture
SHastatahoe
Posts: 3414 - Karma: 19
Has anyone ever had any probelms with these binders? They are older, and have been used. any problems with function or performance based on the 3 screw design?
Dec 8 2009 11:13PM
0 0
profile picture
GNARBARSTAR
Posts: 639 - Karma: 16
i would say the geze toe piece is bomber, lots of metal.
Dec 8 2009 11:52PM
0 0
All times are Eastern (-4)