Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

How close can I remount my bindings to the old holes?

profile picture
backwardsrider
Posts: 543 - Karma: 70

So, I have to remount a couple pair of skis for a new pair of boots. I'd like to keep the mounts fairly close to the same position on most of them, how far do I have to go?

Oct 30 2009 1:00AM
0 0
profile picture
Jesus-FlwrSubaru
Posts: 1077 - Karma: 53
1cm
Oct 30 2009 2:35AM
0 0
profile picture
LC.
Posts: 5952 - Karma: 2,423
Reuse the toe or heel holes, whatever will work best for your position.
Oct 30 2009 5:19AM
0 0
profile picture
jibjunkie
Posts: 3807 - Karma: 191
yea if you helicoil the current holes and ether move just the toe or just the heel then its your best bet with minimal effect on ths ski
Oct 30 2009 7:48PM
0 0
profile picture
mr_grom
Posts: 708 - Karma: 51
I had my skis 2 years ago mounted at 2 back of boot center and then a car ran over my bindings and fucked it up. Then I put it at 1 back and it was fine.
Oct 30 2009 8:19PM
0 0
profile picture
Ftacnik
Posts: 1997 - Karma: 111
I try to avoid skiing in the street
Oct 30 2009 10:12PM
0 0
profile picture
.Max.
Posts: 2930 - Karma: 701
you can fill the hole by taking a golf tee and putting it in the hole with some wood glue. then break it off and file the splinters down. then wait for it to dry and redril the hole.
Oct 30 2009 11:00PM
0 0
profile picture
stephengillboy
Posts: 462 - Karma: 191
if you want the same setup use helicoils, but if not plug the old holes and keep drilling
Nov 3 2009 6:56PM
0 0
All times are Eastern (-4)