Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

PVC Rail

profile picture
K-G
Posts: 316 - Karma: 24
I'm making a rail for my backyard. I was thinking of using wood for the frame, then pvc pipes on top. It needs to be very sturdy. Anybody got any ideas on making one? Thanks
Oct 14 2009 9:49AM
0 0
profile picture
K-G
Posts: 316 - Karma: 24
Anybody ever made one here? Tips?
Oct 14 2009 9:56AM
0 0
profile picture
PASKIINGSUCKS
Posts: 9097 - Karma: 777
you could probably use an invite to the build a jib cult. lots o info in there.
Oct 14 2009 9:58AM
0 0
profile picture
PASKIINGSUCKS
Posts: 9097 - Karma: 777
https://www.newschoolers.com/web/content/viewcult/id/453/

go there hit request to join.
Oct 14 2009 9:59AM
0 0
profile picture
JuliusJ
Posts: 3778 - Karma: 2,106
just get a fat pvc pipe and build it like this this is the rail---> O
|_|
this is badly done but i don't really care cause you should be able to figure it out but make little side supports and then the bottom part and then just build it higher and leg support. if that makes any sense
Oct 14 2009 10:00AM
0 0
profile picture
jnizzle
Posts: 365 - Karma: 75
just get like a foot wide pvc then you dont need to do shit to it just build a lip and wha la there you go a fancy jib.

and you can prolly just snake a piece of this from a construction site
Oct 14 2009 10:26AM
0 0
profile picture
youngskeezy
Posts: 30 - Karma: 10
2.5 inch PVC breaks.
Oct 14 2009 12:31PM
0 0
profile picture
erikK
Posts: 3245 - Karma: 2,325
EMBED ATTEMPT

Oct 14 2009 7:19PM
0 0
profile picture
snowking249
Posts: 1452 - Karma: 34
hahahaahaha!!!! i love the ending, this is very helpful too
Oct 14 2009 7:26PM
0 0
profile picture
K-G
Posts: 316 - Karma: 24
That doesn't look to sturdy. Couldn't it tip pretty easily?
Oct 14 2009 7:27PM
0 0
profile picture
spruitm
Posts: 2219 - Karma: 1,057
i dont know who posted this originally, someone on ns.  i saved it cause it was good and i based my rail off it

Click for larger image
Oct 14 2009 7:29PM
0 0
profile picture
erikK
Posts: 3245 - Karma: 2,325
No it won't tip over unless you fall into it or something
Oct 14 2009 7:33PM
0 0
profile picture
mak
Posts: 700 - Karma: 167
I've made one with a wooden frame and the one problem with it was that it wasn't laterally strong enough. So I'd recommend putting some good side supports on it.
Oct 14 2009 8:10PM
0 0
profile picture
bananas
Posts: 1419 - Karma: 164
bajc
Oct 14 2009 8:38PM
0 0
All times are Eastern (-4)