Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!
The first thing to do is turn the heater knob full blast for 2-3 minutes to quickly prepare it. Then turn back down to around 1/3rd or so. You will need to adjust the temperature knob differently depending on which herb you are using. Try various settings until you find the correct one. You should never need to turn it up past 2/3’s, your herb will burn and not vaporize correctly.
Next use an herb grinder to finely chop your herbs. The larger chunks don’t seem to vaporizer as well. Then place the herb into the wand so about 1/8 to 1/4 is filled; do not pack it in. If this is your first time vaporizing, don’t use quite as much herb as you would normally smoke.
Now place the wand up to the hole on the glass heater and the two pieces will come together. Keep holding the wand in place and start to inhale. This will draw the air into the heater, then heat it up and pass it through the herb. You may not finish it all in one shot, so feel free to keep drawing until the vapor is no longer visible.
Next simple turn the wand upside down to empty the spent herbs