Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Marker Duke Questions

profile picture
SEskier
Posts: 570 - Karma: 115

So im looking at getting a pair of the dukes to go with the praxis mtn jibs (similar to next years jj's).  The dukes look pretty solid but the only complaint i've heard about them is that the heel sometimes pulls out due to only one screw in that area.   This problem would also seem to be worse if you were landing switch off cliffs, which i will be doing with this setup next year.  I haven't broken a pair of bindings before, but i want this pair to last me awhile.  Basically i want to know...

       Has anybody had similar problems with their dukes?

       If so how much do you weigh, how hard do you charge, etc... 

       Would a possible pullout even be a problem for me at 5' 11", 160lbs?

       Are next years dukes changed in any way that would improve their switch landing durability?

May 21 2008 7:42PM
0 0
profile picture
skibikeclambake
Posts: 2346 - Karma: 27
i believe they added a washer to that screw, not sure why though. that screw ripping out is what would keep me away, but
May 21 2008 9:53PM
0 0
profile picture
ESAND
Posts: 1607 - Karma: 744
Dukes have 0 screws from the heel piece to the ski but they connect to a plate which has 4 screws. I'm not sure where this 1 screw thing come from. Maybe the switch screw? The real question is how much touring do you plan on doing with these.
May 22 2008 12:35AM
0 0
profile picture
SEskier
Posts: 570 - Karma: 115

^^the one screw thing comes from all the threads ive read about the dukes.  everybody seemed to complain about a weak connction in the back of the binding.  i think it might be the screw for the lock.

i definately want some touring bindings again this year. i had the nx21 this year, but they became to big to use when i got new boots.  i tour around 20+ times a year, but they aren't extremely long trips.  don't bother suggesting that i get trekkers because they are shit.

May 22 2008 10:29AM
0 0
profile picture
ESAND
Posts: 1607 - Karma: 744
No, dukes sound perfect for you. but you just answered your own question. What else are you going to get.

You've tried naxo's, dukes are better.
You don't want trekkers.
Freerides are about the same as your naxos

Your only options are dukes and dynafits. And one requires new boots.
May 22 2008 2:02PM
0 0
profile picture
SEskier
Posts: 570 - Karma: 115
i know that the dukes are pretty much my only option for a touring binding.  i was just wondering how they've held up for people doing similar stuff as me.
May 22 2008 7:23PM
0 0
profile picture
ESAND
Posts: 1607 - Karma: 744
I'd worry about pre release before i'd worry about pull out. I've gone pretty big on mine and they've been fine. I don't land switch though.
May 22 2008 7:48PM
0 0
profile picture
johanblaze
Posts: 4987 - Karma: 343
Duke's are a shitty touring binding. If you want to ski hard, get Trekkers.
May 22 2008 8:05PM
0 0
profile picture
ESAND
Posts: 1607 - Karma: 744
Why? That makes almost no sense. There isn't all that much stress on the switch screw. If you land switch with you weight presumably forward you are pushing down on the toe and pulling up on the heel. Which is connected directly to that plate. I can't see very much stress going to the switch screw.

And to sean pistol - I think they walk better than freerides
May 22 2008 9:08PM
0 0
profile picture
tSki
Posts: 956 - Karma: 171
nomen is right on this, everything bad ive read has been from ppl doing switch landings. Everyone else seems to think they are bombproof
May 22 2008 9:22PM
0 0
profile picture
ESAND
Posts: 1607 - Karma: 744
How/where have they broken? I've busted two pairs, but I never land switch. Marker's warranty is pretty sick though.
May 22 2008 9:35PM
0 0
profile picture
ESAND
Posts: 1607 - Karma: 744
the metal lever?
May 23 2008 12:17AM
0 0
profile picture
ESAND
Posts: 1607 - Karma: 744
Thats what I ment. I doubt that is from landing switch.
May 23 2008 12:10PM
0 0
profile picture
SEskier
Posts: 570 - Karma: 115
bump
May 25 2008 10:09PM
0 0
profile picture
nickwm21
Posts: 221 - Karma: 11
Check this thread on tgr http://tetongravity.com/forums/showthread.php?t=118679&highlight=duke+problems

Problems come from using the lever when the binding is jammed with snow/ice. Using too much force bends that screw or something
May 26 2008 11:00PM
0 0
profile picture
ESAND
Posts: 1607 - Karma: 744
bends the black metal piece connected to the lever. Which is what nomen is seeing break. It's not from landing switch, its from careless misuse. I should know I did it to one of my bindings already, luckily marker was pretty awesome and gave me a warranty pair.
May 26 2008 11:32PM
0 0
profile picture
SEskier
Posts: 570 - Karma: 115


in this picture you can see the screw i was originally referring to.  has anybody encountered problems with that screw? would using helicoils help prevent those problems?  thanks for any additional advice.
Jun 2 2008 2:01PM
0 0
profile picture
SEskier
Posts: 570 - Karma: 115
BuMp
Jun 3 2008 3:19PM
0 0
profile picture
ESAND
Posts: 1607 - Karma: 744
what the hell do you want us to say? Everybody who is saying anything has said it. The bindings will be more than fine for you. Just buy them.
Jun 3 2008 10:09PM
0 0
All times are Eastern (-4)