Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

I need some advice on new bindings

profile picture
Dylan_
Posts: 9824 - Karma: 1,403
im 5'8 like 170ish
my rossignol scratch 120's pop out like madddd. im on a 7 din and i took them to the shop and they say everythings fine. i know there not they pop out from the side all the time ill be in air and they fall of im getting sick of  it and i dont want to get hurt, so what im asking is what bindings do you suggest for me im about 90% park. btw does this happen to any one else ? and i looked at my foward pressure and moved it back too so ??

suggestions  on bindings you guys ride and like that dont pop out  and that are worth the money ?
Jan 27 2008 11:38AM
0 0
profile picture
JGP.
Posts: 2785 - Karma: 474
crank that din up to 9 or 10 and see how that feels.  if they are still prereleasing it may be time to switch to a pivot/FKS race stock binding. thats what I ended up doing and it worked out for me.
Jan 27 2008 11:46AM
0 0
profile picture
Dylan_
Posts: 9824 - Karma: 1,403
ive cranked up the din and their just fucked i think. btw im thinking pivot the fks look kinda goofy. i was also thinknig solomon sth 16's  ??
Jan 27 2008 11:48AM
0 0
profile picture
Dylan_
Posts: 9824 - Karma: 1,403
bump gotta know
Jan 27 2008 12:11PM
0 0
profile picture
JGP.
Posts: 2785 - Karma: 474
yep those would be good as well.
Jan 27 2008 12:18PM
0 0
profile picture
Aenigma
Posts: 11256 - Karma: 424
"and i looked at my foward pressure and moved it back too"

That could be the reason why.  If you have less forward pressure than you should your bindings will be popping off all the time. 
Jan 27 2008 12:22PM
0 0
profile picture
Dylan_
Posts: 9824 - Karma: 1,403
i ment foward my bad**
Jan 27 2008 12:25PM
0 0
profile picture
newberry34
Posts: 34 - Karma: 10
crank the din up 9 or 10 like the other kid said your front should be 8 or 9 and if you have a back din set it as high as it will go
Jan 27 2008 12:27PM
0 0
profile picture
jhackbeez
Posts: 2136 - Karma: 258
why would your din be at 7 if your 170?  i know thats prolly the recommended, but im 6 foot, 150 and i have the same bindings and i have mine at 11 and there fine
Jan 27 2008 12:27PM
0 0
profile picture
chazz.
Posts: 2721 - Karma: 23
i pop out in the park when i crash but i would rather have that then to shred my ACL. but if you wanted to change bindings the solly's are a good choice for just a park binding.
Jan 27 2008 12:34PM
0 0
profile picture
Dylan_
Posts: 9824 - Karma: 1,403
bump
Jan 27 2008 1:37PM
0 0
profile picture
Dylan_
Posts: 9824 - Karma: 1,403
bump
Jan 27 2008 3:15PM
0 0
profile picture
Fish_Sandwich.
Posts: 9108 - Karma: 16
I love my Mojo 15's and my Jesters.  I had px12's last year and liked those as well.
Jan 27 2008 3:21PM
0 0
profile picture
upthebrackette
Posts: 162 - Karma: 12
I'd go with some p12's if you can find them or px12's. I tried some solly 912ti's this season and they've given me nothing but problems I'd try to stay away from those if you can.
Jan 27 2008 3:59PM
0 0
profile picture
=nick=
Posts: 10471 - Karma: 2,184
are you serious. you are not getting a bindings cuz it "looks kinda goofy"

what a fuck
Jan 27 2008 4:02PM
0 0
profile picture
Dylan_
Posts: 9824 - Karma: 1,403
well send me a link to the ones you think i should get ...
Jan 27 2008 4:08PM
0 0
profile picture
LBJJ
Posts: 683 - Karma: 1,730
dude just crank the din up i only weigh 120 and i have my din at like 8.5 and they pop off only when needed.
Jan 27 2008 5:18PM
0 0
profile picture
Dylan_
Posts: 9824 - Karma: 1,403
the back dins are hard as fuck to turn
Jan 27 2008 5:20PM
0 0
profile picture
-Mugatu
Posts: 2579 - Karma: 84
drink milk/ pump some iron, get your swell on
Jan 27 2008 5:27PM
0 0
profile picture
Dylan_
Posts: 9824 - Karma: 1,403
i put it to an 8 see how it works tommrow, i still want to pop out when i absolutly need to though my recommended is at a 6 soo..
Jan 27 2008 5:38PM
0 0
profile picture
MEGAZORD
Posts: 4531 - Karma: -7
If you go solly, get something all metal like a 916.  I keep breaking the mounting plate in the heel and they fixed that with the sth and 916
Jan 27 2008 6:01PM
0 0
profile picture
B.Snow
Posts: 1859 - Karma: 92
Im 5'8, 130 and have pivot 14's at 9 you just gotta crank em up
Jan 27 2008 6:05PM
0 0
profile picture
InfernoHits
Posts: 4755 - Karma: 192
Im 5'9'' 170ish and I have jesters. I love them.
Jan 27 2008 6:19PM
0 0
profile picture
LC.
Posts: 5952 - Karma: 2,423
If your forward pressure is too high you'll prerelease, not stay in. Set it right and turn your DIN up.
Jan 27 2008 6:30PM
0 0
profile picture
Tucks
Posts: 2120 - Karma: 161
S914 or s916 by salomon or look p or px
Jan 27 2008 7:01PM
0 0
profile picture
LBJJ
Posts: 683 - Karma: 1,730
yeah just crank that up im only 120 and mine are at 8.5
Jan 28 2008 8:49PM
0 0
All times are Eastern (-4)