Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

My rail good? and i need a quick answer

profile picture
.d.
Posts: 927 - Karma: 12
My rail plan 1

My Rail Plan 2

My Rail Plan 3

is it good? and should i put diagnal supports inbetween the holes? cuz i have a feeling that the whole top part can collapse forward once i hit it...

thanks
Nov 17 2007 2:36PM
0 0
profile picture
brenker
Posts: 3188 - Karma: 71
amazing setup, i made an identical one last season, pvc tubes obviously...? this setup is the shit. build it dude.
Nov 17 2007 2:38PM
0 0
profile picture
brenker
Posts: 3188 - Karma: 71

i dont think you will need any more supports, maybe just a couple of diagnal pieces from the end of the leg to the bottom of the 2x4 for side support... if that makes sense

Nov 17 2007 2:40PM
0 0
profile picture
.d.
Posts: 927 - Karma: 12
ya thanks a lot. and im planning on building it next weekend.
Nov 17 2007 2:42PM
0 0
profile picture
Tinga
Posts: 11349 - Karma: 2,333
my friend has three of these set ups. theyve started falling apart but if you build them solid out of decent wood and do a good job of nailing and stuff you should be ok for a few seasons
Nov 17 2007 2:44PM
0 0
profile picture
Holte
Posts: 10730 - Karma: 7,744
I'd put at least a couple crossbars in there to give it some horizontal stability.
Nov 17 2007 2:46PM
0 0
profile picture
Holte
Posts: 10730 - Karma: 7,744
Oh, i didn't see your question about diagonal supports. Yes. You should. Exactly.
Nov 17 2007 2:47PM
0 0
profile picture
SkiingRocks89
Posts: 369 - Karma: 11
how are you going to fasten the pvc to the wood?
Nov 17 2007 2:49PM
0 0
profile picture
jhackbeez
Posts: 2136 - Karma: 258
you need to put supports in between each space, going up at an angle, 2 to a space, or else it will break.  happened to my rail
Nov 17 2007 2:54PM
0 0
profile picture
Pippin
Posts: 4846 - Karma: 661
yah it deff wouldn't hurt to
Nov 17 2007 2:55PM
0 0
profile picture
.d.
Posts: 927 - Karma: 12
ill screw up screws from the bottom and put botls at the very end of the pvc pipes.

and ya i think im gonna put supports in the square spaces and supports for horizontal support
Nov 17 2007 2:56PM
0 0
profile picture
user098123
Posts: 6072 - Karma: 18
Mine looks almost identical to that. I didn't need the diagonal supports but i used quite a bit of wood on the vertical supports so it was sturdy enough.
Nov 17 2007 2:57PM
0 0
profile picture
fouldsys
Posts: 7404 - Karma: 39
wow that is actually the same as my rail. only the base is a little wider. its mad sturdy. do it up.
Nov 17 2007 3:01PM
0 0
profile picture
skierkid_92
Posts: 228 - Karma: 11
looks good to me...my buddy built one like that last year its freakin sick
Nov 17 2007 3:01PM
0 0
profile picture
jason...
Posts: 9006 - Karma: 780
i have a similar set up, works well
Nov 17 2007 3:24PM
0 0
profile picture
doublexl
Posts: 8407 - Karma: 26
loks pretty legit. id put diagnol supports at the first and last holes cause thats where the most motion is. if that makes any sense.

kinda like
I/I_I_I\I
Nov 17 2007 3:35PM
0 0
profile picture
Rocceral
Posts: 110 - Karma: 10
how long are those bottom legs?
Nov 17 2007 3:49PM
0 0
profile picture
.d.
Posts: 927 - Karma: 12
the ones going across for so it doesnt fall to the side are 2 ft long.
the whole thing is 12 ft
the verticle supports are 1 ft
its a total of 19 inches high
Nov 17 2007 4:24PM
0 0
profile picture
MadSteezin
Posts: 4572 - Karma: 936
agreed.

Nov 17 2007 4:43PM
0 0
profile picture
seider
Posts: 958 - Karma: 23
yes, you sould put cross supports in. i just made a rail recently, kind of like what yours will be but its an up rail. heres the link
https://www.newschoolers.com/web/content/pictures/id/155516/
Nov 17 2007 4:54PM
0 0
profile picture
ax_murderer
Posts: 3322 - Karma: 30
seems like alot of wood to me. i just have real simple, two 2x4s underneath the pipes, and drill holes in the side of the pvc so it doesnt effect sliding and then pwer drill some screws straigh through to the wood, then two 2x4 beems extending down from the 2x4s supporting the frame and a couple palnks perpendicular for sideways support. cheap light solid, mines survived 3 years
Nov 17 2007 5:41PM
0 0
profile picture
Shawny*Boy
Posts: 14 - Karma: 10
dude thats a sick rail, my friend is making one just like that but he just needs the PVC pipes for it
Nov 17 2007 5:53PM
0 0
profile picture
deezy.
Posts: 2538 - Karma: 26
yes.
Nov 17 2007 6:01PM
0 0
profile picture
no_steeze_in_NY
Posts: 225 - Karma: 13
that looks good but definitely go for the diagonal supports. try to use steel bolts in key spots if you have them, especailly when your attaching the pvc to the top. i did that with mine and its lasted a long time and stood a lot of beatings.
Nov 17 2007 7:26PM
0 0
profile picture
bc_junkie
Posts: 20 - Karma: 8
cool. what are the dimentions going to be?
Nov 17 2007 7:38PM
0 0
profile picture
PeteyG
Posts: 2946 - Karma: 49
nice front yard
Nov 17 2007 8:40PM
0 0
profile picture
finnafuckyobitch
Posts: 1647 - Karma: 865

fuck!!!! this is sick im gona build one jst like this

Nov 17 2007 8:44PM
0 0
profile picture
bdowning
Posts: 1630 - Karma: 243
looks sturdy and stable...go with it man good answer
Nov 17 2007 9:16PM
0 0
profile picture
finnafuckyobitch
Posts: 1647 - Karma: 865

how do u connect the pvc to the wood tho?

Nov 17 2007 9:21PM
0 0
profile picture
MadSteezin
Posts: 4572 - Karma: 936
looks good enough for government work...
Nov 17 2007 9:26PM
0 0
profile picture
Jared.
Posts: 1465 - Karma: 59
good for show but will it be good for the doe
Nov 17 2007 9:31PM
0 0
profile picture
-+Siver+-
Posts: 1902 - Karma: 12
yeah you should putt the diagonal support in their even if it isn't necessary it wouldn't hurt
Nov 17 2007 9:39PM
0 0
profile picture
skiP.E.I.
Posts: 7601 - Karma: 20,063
yeah, but diagonal supports, if only in the end segments. It will be more solid that way. Also, use screws instead of nails if you can, because they won't tear out too easily and can amke it tighter.
Nov 17 2007 10:41PM
0 0
profile picture
Pklink04
Posts: 5608 - Karma: 392
Here is a suggestion with PVC, get a wooden doowel to go inside the pipe, this will prevent if from shattering after a long period of wear. just to increase the longevity, you dont have to do it though
Nov 17 2007 10:58PM
0 0
profile picture
Albrecht.
Posts: 1535 - Karma: 11
i know your from the burgh, cause your in the springs cult.  this summer i spent three days scouring allegheny county for a hardware store that sold decent diameter pvc piping longer than 10 feet.  good luck.
Nov 17 2007 11:09PM
0 0
profile picture
Karcher
Posts: 3788 - Karma: 1,934
dude that looks really fun. i think that'll hold. don't worry, build it and fun will come
Nov 17 2007 11:52PM
0 0
profile picture
solitaryman
Posts: 3578 - Karma: 123
dude, jason are you fucking retarted you've like never used it, ever?



Nov 18 2007 12:19AM
0 0
profile picture
funk.
Posts: 2679 - Karma: 33
yay for sketch-up
Nov 18 2007 12:34AM
0 0
All times are Eastern (-4)