Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Removing p12 heel piece

profile picture
4ReeL_
Posts: 3187 - Karma: 1,563
what is the trick to remove the heel piece of the p12?
Mar 10 2007 9:52PM
0 0
profile picture
iggyskier
Posts: 10433 - Karma: 9,727
you see the small screw that determines the heel pieces location used to adjust the binding duing mounting?  Should be on the back, bottom, center.  Turn it so that the heel piece moves further and further back.  Eventually, it will release from the track and you can slide it off.  The binding track is then what is secured to the actual ski, and you can just unscrew it and your done.

make sense?
Mar 10 2007 9:56PM
0 0
profile picture
4ReeL_
Posts: 3187 - Karma: 1,563
ya makes total sense but when i turn the heel piece screw all the way back the part stops and wont turn anymore and the binding wont slide anymore back
Mar 10 2007 10:04PM
0 0
profile picture
iggyskier
Posts: 10433 - Karma: 9,727
make sure it will forsure not turn anymore, then try and give it a little push.  Should pop off the track
Mar 10 2007 10:06PM
0 0
profile picture
4ReeL_
Posts: 3187 - Karma: 1,563
will do thanks for the help
Mar 10 2007 10:07PM
0 0
profile picture
DopeSauce
Posts: 1677 - Karma: 26
That happened to me too, it just stopped, wouldn't go forward or backwards. I threw my ski against the concrete a few times and it came off
Mar 11 2007 10:31PM
0 0
profile picture
=nick=
Posts: 10471 - Karma: 2,184
unscrew completely till u keep unscrewing and it isnt moving anymore. than pull the heelpiece towards the back of the ski and it will pop off. altho i think iggy said that :)
Mar 11 2007 10:40PM
0 0
profile picture
yannicktysl
Posts: 53 - Karma: 10
dude you should try a band saw
Mar 11 2007 10:48PM
0 0
All times are Eastern (-4)