Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Making An S-Rail

profile picture
jack_weisman
Posts: 2310 - Karma: 169
how would you do it?  ill post a pic when im done
Feb 5 2007 4:38PM
0 0
profile picture
chickenwang
Posts: 5639 - Karma: 40
are you making one or asking us how to make one?
Feb 5 2007 4:39PM
0 0
profile picture
eheath
Posts: 61091 - Karma: 118,105
The best way of making the curves is to use some math, but fuck that. I'd use two 15-20ft 2 inch tubes, maybe like .120 gauge, and just bend them to say a 45 degree turn, see how it looks, and bend at more angle if i wanted to.
Feb 5 2007 5:04PM
0 0
profile picture
ECGove
Posts: 1947 - Karma: 75
try Build-A-Jib 101, you'll probably get better results
Feb 5 2007 5:13PM
0 0
profile picture
vincepru
Posts: 5474 - Karma: 17
yep, a buddy of mine made a biiig one for his senior project at school. like 40ft long or something?

pretty much just made 2 c rails with a inlet on one and a outlet on the other, and connected them, transitioned realy smooth also. and the piping he used was like between 3-4inches.
Feb 5 2007 5:15PM
0 0
profile picture
MadSteezin
Posts: 4572 - Karma: 936
get an invite to Build-A-Jib 101 cult
Feb 5 2007 6:31PM
0 0
profile picture
cgroves
Posts: 581 - Karma: 125
before you do any math you need a pipe bender.
Feb 5 2007 7:14PM
0 0
profile picture
cgroves
Posts: 581 - Karma: 125
before you do any math you need a pipe bender.
Feb 5 2007 7:14PM
0 0
All times are Eastern (-4)