Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Rossignol Axial 12

profile picture
InfernoHits
Posts: 4755 - Karma: 192
Terrible bindind, they are so easy to break and I have never had so many problems with a binding before in my life. Pre-releasing, every time I'd land a little crooked off a jump the heal would rip out. The bindings were shit and I am sending them back to rossignol with a strongly worded letter and seeing if they do anything about it
Feb 5 2007 4:37PM
0 0
profile picture
=nick=
Posts: 10471 - Karma: 2,184
that binding doesnt exist, so rossi might laugh at you. however, the rossignol axial 120 is a good binding that shouldnt do all the prereleasing, was the forward pressure correct
Feb 5 2007 5:02PM
0 0
profile picture
InfernoHits
Posts: 4755 - Karma: 192
yea the 120s. But I don't know shit about bindings and anything with forward pressure, the shop did all the work and set it up
Feb 5 2007 5:39PM
0 0
profile picture
skidemon22
Posts: 4418 - Karma: 1,941
wait, do u have the old axial 120's (look p12) or the axial 2 120's (aka px12)?
Feb 5 2007 6:55PM
0 0
profile picture
freeski1620
Posts: 5670 - Karma: 1,718
im gonna bet px
Feb 5 2007 6:57PM
0 0
profile picture
MEGAZORD
Posts: 4531 - Karma: -7
Insert generic crank down DINs answer
Feb 5 2007 6:57PM
0 0
profile picture
Ryanvdonk
Posts: 12808 - Karma: 1,945
im gonna bet axium
Feb 5 2007 7:01PM
0 0
profile picture
skidemon22
Posts: 4418 - Karma: 1,941
an intereesting point
Feb 5 2007 7:42PM
0 0
profile picture
madtownfreestyle
Posts: 841 - Karma: 53
no i actually had the same problem a couple days ago...and im talkin axial 2 120 ti's....pre-releasing like crazy..(only one) then one time it released and when i picked it up the heelpiece was all the way foward...like farther than it goes with ur boot in...im not impressed at all...returning them and throwing some deadbolts on
Feb 5 2007 9:01PM
0 0
profile picture
freeski1620
Posts: 5670 - Karma: 1,718
i broke the brake on my p14's this weekend.
Feb 5 2007 9:02PM
0 0
profile picture
teamsleep
Posts: 788 - Karma: 22
are deadbolts heavier than the rossi/look bindings
Feb 5 2007 9:05PM
0 0
profile picture
teamsleep
Posts: 788 - Karma: 22
i hav the scratch 100 and the brakes are fine

are the deadbolts lighter?
Feb 6 2007 3:53PM
0 0
profile picture
japollner
Posts: 1699 - Karma: 459
Im betting the shop misadjusted the forward pressure. the fp adjust on these is really weird. When it is correct, it looks like the pressure is way to much. So much so that sometimes the heel piece wont let go of your boot when you click it off.
Feb 6 2007 5:07PM
0 0
All times are Eastern (-4)