JACKET:

- TPU coated 25,000mm waterproof/breathable shell fabric with 100% taped seams

- Oversized hood with snap hood stay and flexible hood brim (to keep hood in place when spinning or riding switch)

- Magnetized, split main zipper flap with fleece face area (easily allows for jacket to be partially zipped up)

- 6 zippered vents with elastic mesh protector strips (so mesh doesn't get caught when opening/closing vents)

- Zip-off sleeves with locking zipper pulls (sleeves will not unzip themselves)

- Light weight thermal insulation with breathable printed mesh liner

- Huge inner mesh pockets and hidden zippered MP3/cell pocket

- Heavy duty, large gauge #8 YKK tooth zipper on main zip

- 7 waterproof pockets, with zips and magnetized closures

- Double stitched bar-tacked seams in high stress areas

- Comes with removable/adjustable hiking suspenders

- Comes with our 1-year warranty

- Laser cut, heat pressed logos

- Elastic wrist cuffs

PANTS:

- 3L TPU coated 25,000mm waterproof/breathable shell fabric with 100% taped seams

- Zip-off bib (with waist cinchers for when bib is not used). Buy extra bibs to customize your suit.

- 7 waterproof pockets, with zips and magnetized closures

- 2 huge zippered vents with elastic mesh protector strips

- Double stitched bar-tacked seams in high stress areas

- Adjustable zippered pant cuff spreaders with snaps and zipper protectors

- Elastic boot gators with super thick 3L shell fabric

- Light weight thermal insulation

- Breathable printed mesh liner

- Laser cut, heat pressed logos

- Reinforced crotch

Tees:

Our tees are made with a heavy weight, preshrunk 5.5oz, 50/50 cotton/poly blend which is some of the highest quality fabric available. They feature our new improved Virtika fit (be sure to check the size chart on the left), and come in all sorts of colors and prints. They have double needle sleeves and hem, waist and sleeve woven loop tags, and are made with 5% polyester from recycled plastic bottles.

Virtika Pull-Over:

It's the same as our Classic Badge Hoodie but without the zipper. It has a 3-panel hood and improved sizing so be sure to check the size chart on the left before ordering. It is made from super high quality, pre-shrunk 9oz 65/35 ring-spun combed cotton/poly.

- Fully coverseamed

- twill-taped neck

- super large, 2×2 rib knit cuffs and waistband

- Large Virtika print on front

- Custom woven loop tags on hood and bottom cuff

Beanies:

Perfect for riding or looking steezy in town. A 2-layer beanie, but overall thinner and floppier than our FD Beanies. Keeps heat in and snow out while still letting your head breath. Tall enough to sag, but short enough to rock under a helmet if need be. Virtika loop tag can still be seen when the bottom is flipped up.

2 layer, 100% acrylic, tall fit

Virtika script woven loop tag

Snap-backs:

Our new Snap-Backs and Trucker hats adjust to fit almost any head out there. The brims come flat, but can be easily bent to match your style.

- 3D V logo embroidery on front, right side.

- Virtika woven loop tag on back, right side.

- 100% cotton.

- Moisture absorbant, stretchable matching pro fabric sweatband.

- Reinforced with hard buckram.

- Deep fit.

Classic Badge Hoodie:

Our Classic Badge Hoodie has a 3-panel hood and improved sizing so be sure to check the size chart on the left before ordering. It is made from super high quality, pre-shrunk 9oz 65/35 ring-spun combed cotton/poly.

- New nylon, custom dyed YKK coil zippers

- Custom woven loop tags on hood and bottom cuff

- Fully coverseamed

- twill-taped neck

- super large, 2×2 rib knit cuffs and waistband

Women's V-neck tee:

New to our line up is a super soft, not too thick, 4.3oz 100% ring spun combed cotton Women's V-Neck. It's pre-shrunk, has a slim fit, and features a printed Virtika script logo on the chest and woven loop tags on waist and sleeve cuffs.