Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Types of pvc for backyard setups

profile picture
chicknfriedsteak
Posts: 984 - Karma: 4,691
After watching Kevins latest summer edit (see below) I got inspired to spice up my backyard park. I've already got a bunch of larger pvc pipes that all work great, but I'd like build an upward curving c rail (banana rail? can't remember the name) for mistys underflips ect. However even my thinnest pipe is way to heavy of a grade to bend more than a couple degrees. Does anybody have any recomendations for types or grades of pvc that are still strong, but flexible enough for that much curvature?

https://www.newschoolers.com/videos/watch/840512/Kevin-Salonius---Summer-Rail-2016
Oct 2 2016 4:29PM
1 0
profile picture
milk_man
Posts: 5214 - Karma: 6,494
I honestly have no idea. But...if you had enough heat couldn't you bend a regular 6 inch wide pvc? No clue if it would work
Oct 2 2016 5:03PM
0 0
profile picture
Swandog7
Posts: 4955 - Karma: 9,019
my suggestion is just slapping a few like 1 1/2 inch pipes on a 2x4, way easier to bend. Not sure how wide you want it though
Oct 2 2016 9:12PM
0 0
profile picture
brett_fisher
Posts: 2417 - Karma: 10,493
hairdryer
Oct 2 2016 11:53PM
0 0
profile picture
sodaksteeze
Posts: 102 - Karma: 334
I used a heat gun on 2 inch pvc and it took fucking forever just for a rainbow, also hard to make it look even...
Oct 3 2016 10:38PM
0 0
profile picture
LamSobinsky
Posts: 364 - Karma: 4,287
idk what the different grades are but i have 6 inch diameter pvc in my backyard and it seems like you could bend it if you took a heat gun to it with some patients
Oct 4 2016 9:49PM
0 0
profile picture
Deepskier
Posts: 3267 - Karma: 4,818
I have a few 1 or 2 inch pipes that you could bend 90 degrees any direction no heat. Id just go to home depot or lowes and pick stuff up and feel its flexibility.
Oct 5 2016 9:40PM
0 0
profile picture
MIHoodlum
Posts: 245 - Karma: 256
https://www.newschoolers.com/news/read/Build-rail-Andy-Parry
Oct 6 2016 12:50AM
0 0
profile picture
Tanner_McClune
Posts: 28 - Karma: 347
use a bunch of 1-2 inch pvc, and towards the end of the rail, stack blocks like stairs to curve up.
Oct 6 2016 12:55AM
0 0
profile picture
dustygoldflakes
Posts: 484 - Karma: 700
Tanner_McCluneuse a bunch of 1-2 inch pvc, and towards the end of the rail, stack blocks like stairs to curve up.

This is what i did, works very well indeed.
Oct 6 2016 12:19PM
0 0
profile picture
John18_6
Posts: 7313 - Karma: 49,158
I built up a fire, heated up the PVC and bent it. But there is PVC that bends a little without heat.
Oct 7 2016 12:36PM
0 0
profile picture
chicknfriedsteak
Posts: 984 - Karma: 4,691
Tanner_McCluneuse a bunch of 1-2 inch pvc, and towards the end of the rail, stack blocks like stairs to curve up.


dustygoldflakesThis is what i did, works very well indeed.


How do you screw it down? If you build up the blocks from underneath you can't put screws in underneath the board up into the pipe
Oct 7 2016 2:10PM
0 0
profile picture
Swandog7
Posts: 4955 - Karma: 9,019
chicknfriedsteakHow do you screw it down? If you build up the blocks from underneath you can't put screws in underneath the board up into the pipe


I recommend building like a triangle almost out of a block, and then it would screw down well (you screw it onto the hypotenuse side). Make it as steep as you want
Oct 7 2016 4:48PM
0 0
profile picture
CBishop
Posts: 135 - Karma: 59
No clue on building but i can't wait to see a video of a misty off a c-rail in the backyard.
Oct 7 2016 5:26PM
0 0
profile picture
chicknfriedsteak
Posts: 984 - Karma: 4,691
CBishopNo clue on building but i can't wait to see a video of a misty off a c-rail in the backyard.


I'll quote this post with a link this winter, OP won't let NS down this time like the guy who said he'd put a rail on chads.
Oct 7 2016 8:09PM
0 0
profile picture
dustygoldflakes
Posts: 484 - Karma: 700
chicknfriedsteakHow do you screw it down? If you build up the blocks from underneath you can't put screws in underneath the board up into the pipe

How I did it was I screwed the pvc onto a 2x4 from underneath the 2x4 until the screws went through about half of the PVC. I measured before to make sure i had the correct screw length. Then I screwed the 2x4 with the PVC on it to another one, thus creating a PVC rail.
Oct 10 2016 12:27PM
0 0
profile picture
Aldenship
Posts: 13 - Karma: 49
sodaksteezeI used a heat gun on 2 inch pvc and it took fucking forever just for a rainbow, also hard to make it look even...


just use smaller pvc. i made a rainbow out of 1 inch pvc. it bends really well.
Oct 13 2016 8:59AM
0 0
All times are Eastern (-4)