Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Summer setup help

profile picture
yungcigsmoker
Posts: 785 - Karma: 5,922
Ok so I have a summer setup (will post pics later, too late right now) but I have an issue with it. I had my dad who is an engineer design it, and he designed it to go as fast as possible. I love the design, but it just goes a little too fast. I have a 10 foot rail, and I'm landing in the middle of it every hit. And then I have like .01 seconds of slide time before I'm off the rail. Any solutions?
Apr 28 2015 9:08PM
74 24
profile picture
TOAST.
Posts: 7265 - Karma: 33,275
Move the rail 5ft further away from the lip.
Apr 28 2015 9:10PM
15 1
profile picture
SteezOnSkis12
Posts: 907 - Karma: 1,446
1. Make rail longer
2. Make tranny longer
3. Don't use the soap and water thing.

#1 Is probably the best idea.
Apr 28 2015 9:18PM
9 1
profile picture
sbarlett
Posts: 882 - Karma: 4,255
You could take like a foot off of the drop-in if you felt that would work
Apr 28 2015 9:20PM
0 1
profile picture
jackdonovan
Posts: 2248 - Karma: 3,079
SteezOnSkis121. Make rail longer
2. Make tranny longer
3. Don't use the soap and water thing.

#1 Is probably the best idea.


this

the best tips i could offer you, as i had this problem also, would be to either
1. Make the rail longer or taller
2. Pop less off the jump so you dont go as far or high
good luck
Apr 28 2015 9:22PM
1 0
profile picture
kung_powpow
Posts: 1990 - Karma: 3,669
Pics of said drop? Do you use water at all? Also 10ft is a pretty short rail for swaps n shit
Apr 28 2015 10:02PM
7 1
profile picture
yungcigsmoker
Posts: 785 - Karma: 5,922
kung_powpowPics of said drop? Do you use water at all? Also 10ft is a pretty short rail for swaps n shit


I'll put some pics up tomorrow, it's too dark out right now. I do water it down. But my friends have even shorter rails, but we are going slower so we can swap just fine.
Apr 28 2015 10:18PM
0 0
profile picture
Mr.noodle
Posts: 1361 - Karma: 4,650
Very interested in this design... I've never heard anyone say they have too much speed
Apr 28 2015 10:21PM
3 1
profile picture
shin-bang
Posts: 4100 - Karma: 6,992
Mr.noodleVery interested in this design... I've never heard anyone say they have too much speed


Yea I'm very very interested in the design too
Apr 28 2015 10:40PM
1 1
profile picture
TOAST.
Posts: 7265 - Karma: 33,275
Chupa_ChupsI'll put some pics up tomorrow, it's too dark out right now. I do water it down. But my friends have even shorter rails, but we are going slower so we can swap just fine.

Have you tried not watering it down?

Also get a longer rail or make another 10ft section and put it after the first. Being able to swap when your going fast will help you improve a lot more than going 1 mph and doing a swap on a rail that's under 10ft.
Apr 28 2015 11:16PM
1 1
profile picture
MitchT
Posts: 560 - Karma: 4,093
Your dad is an engineer why are you asking a bunch of idiot tennagers...

However, I'd say just make the rail longer, you will want more than 10ft eventually.
Apr 28 2015 11:53PM
2 1
profile picture
steezy.stew
Posts: 1137 - Karma: 568
speed is sexy. deal with it
Apr 29 2015 1:00AM
0 0
profile picture
DirtyMyke
Posts: 219 - Karma: 536
Longer tranny, less pop on the lip, longer rail
Apr 29 2015 5:39PM
0 0
profile picture
_____alfredo____
Posts: 1123 - Karma: 2,503
yea get one of them long railz like 20 ft or something or a dfd
Apr 29 2015 5:43PM
1 1
profile picture
yungcigsmoker
Posts: 785 - Karma: 5,922
Mr.noodleVery interested in this design... I've never heard anyone say they have too much speed


Here are the pics. As you can see, I don't really have the room to make the rail longer. To give you guys an idea of how fast I'm going, I land on the middle of the tarp, and slide out into the street.



Apr 29 2015 6:04PM
3 1
profile picture
yungcigsmoker
Posts: 785 - Karma: 5,922
Oh yeah and I use to have no astroturf but I had no edge control and went across the street every time so I added it
Apr 29 2015 6:05PM
2 1
profile picture
Klaus
Posts: 156 - Karma: 1,244
longer tranny
Apr 29 2015 6:09PM
2 1
profile picture
MitchT
Posts: 560 - Karma: 4,093
You will definitely want to consider a road gap option
Apr 29 2015 6:34PM
8 1
profile picture
shin-bang
Posts: 4100 - Karma: 6,992
Step 1.) build large rainbow rail over the road
Step 2.) continue to hit setup and make dank edit
Apr 29 2015 11:13PM
2 2
profile picture
-InfamousMax-
Posts: 136 - Karma: 377
Build a c-rail to prevent slide on the street...
Apr 30 2015 6:50AM
2 1
profile picture
T-Van
Posts: 388 - Karma: 2,574
Dont listen to infamous max , (he doestn know what he's talking abput, he cant even 360)build a U-Rail . Put the curve of the U a bit infront of where the street starts , make the rail go back to the takeoff and use your speed to go up your drop in again. Ask your dad to help you bild a frictionless environment tho.
Apr 30 2015 6:57AM
4 1
profile picture
T-Van
Posts: 388 - Karma: 2,574
*sorry , meant to say that he cant even lencoln
Apr 30 2015 6:59AM
0 5
profile picture
shin-bang
Posts: 4100 - Karma: 6,992
-InfamousMax-Build a c-rail to prevent slide on the street...


That's honestly a real good idea. It's hard to make a smooth c rail. I've actually used a more elbow style taupe and it works fine
Apr 30 2015 9:46AM
0 0
profile picture
Jake_La
Posts: 136 - Karma: 1,897
make your rail Higher
Apr 30 2015 9:58AM
1 0
profile picture
-InfamousMax-
Posts: 136 - Karma: 377
shin-bangThat's honestly a real good idea. It's hard to make a smooth c rail. I've actually used a more elbow style taupe and it works fine


You'r right, but there is a tutorial how to make such a pvc c-rail somewhere here on ns.
Apr 30 2015 11:53AM
1 0
profile picture
henryeckert_
Posts: 65 - Karma: 287
Just throw some turf on the road and move the rail forward
Apr 30 2015 12:03PM
0 0
profile picture
hippy.killer
Posts: 204 - Karma: 947
This actually happened to me too when I first made mine. I just made the rail higher off the ground and the jump higher too and it worked
Apr 30 2015 3:31PM
0 0
profile picture
Zurg
Posts: 1486 - Karma: 4,699
shin-bangStep 1.) build large rainbow rail over the road
Step 2.) continue to hit setup and make dank edit


I love it! 💜
May 3 2015 9:25AM
1 0
profile picture
peterspringer10
Posts: 153 - Karma: 439
MitchThatcherYou will definitely want to consider a road gap option


Screw all the other responses this is the way to go
May 4 2015 7:45AM
1 0
All times are Eastern (-4)