Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Oakley lense issue

profile picture
majortapper
Posts: 108 - Karma: 51
Well i made the classic mistake of leaving my crowbars in a wet bag and then i wiped the inside with the micro bag and now i got smudges on the inside of my goggles. Anyone know any solutions?
Apr 8 2011 12:02AM
0 0
profile picture
acpowman
Posts: 23 - Karma: 10
I've killed a couple of Hi Yellow lenses that way, had to buy new ones..........i think they are toast !
Apr 8 2011 12:14AM
0 0
profile picture
.Hugo.
Posts: 17360 - Karma: 28,469
yup gonna have to buy a new lense
Apr 8 2011 12:26AM
0 0
profile picture
majortapper
Posts: 108 - Karma: 51
it's the inner lens not the outer one
Apr 8 2011 1:11AM
0 0
profile picture
Black.Bird
Posts: 2566 - Karma: 684
That doesn't make a difference, sadly there is no way to replace just the inner lens. The lenses are permanently attached to each other.
You'll have to buy some new goggles or just change the lens.
Apr 8 2011 1:30AM
0 0
profile picture
majortapper
Posts: 108 - Karma: 51
Wow i can't believe i just realized they are attached. I will def get new lenses thx
Apr 8 2011 2:03AM
0 0
profile picture
LC.
Posts: 5952 - Karma: 2,423
Submerge them in warm water, shake off the excess and leave them to drip dry (worked on an old pair of Spy I had). If that doesn't work, try warm water + soap. If it's still there then call Oakley customer service and they'll hook you up with a half price replacement.
Apr 8 2011 5:25AM
0 0
profile picture
I_Am_Mod
Posts: 13214 - Karma: 3,753
how do you actually clean crap on the inside ?
artificial snow has a tendency to melt, dry up and leave this nice looking residu on the inside...

only thing that worked a bit for me was makin a tip of the microfiber bag a bit wet and then dip the spot, but it's still partially there :(
Apr 8 2011 5:52AM
0 0
profile picture
ProLens
Posts: 476 - Karma: 169
Warm water and soap will remove the anti-fog coating on the inner lens, I would just dab it with a wet cloth and wipe it gently with a microfiber cloth after.
Apr 8 2011 11:43AM
0 0
profile picture
shreddenator
Posts: 329 - Karma: 28
It is toast. Finished. Done.

Never wipe the inside of a lens with an antifog coating when it is wet. You have just smudged the coating and pushed it around, it will never go back evenly and clear. Always dab the inside lens gently with the provided cloth, never wipe when wet. I have seen this a thousand times.

Didn' t you get the info from the store where you bought it, usually they have a few smudged lenses on hand to demonstrate to customers....

Tough luck buddy, feelin' for ya
Apr 8 2011 12:08PM
0 0
All times are Eastern (-4)