Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Got the tuned skis

profile picture
Mculla11
Posts: 256 - Karma: -11
Just got new skis. I am riding tomrrow and wondering how and what to use to de-tune my edges. Sorry if this is a repost
Mar 12 2011 9:39PM
0 0
profile picture
Blurst
Posts: 13577 - Karma: 10,168
Hit some rails, they will de tune naturally.
Mar 12 2011 9:42PM
0 0
profile picture
send_it
Posts: 234 - Karma: 69

Or use a gummy stone not a file

Mar 12 2011 9:47PM
0 0
profile picture
[evan]
Posts: 5628 - Karma: 119
This looks like it could have promising results. I just used Google so it might not, but it's worth skimming through for information.
https://www.newschoolers.com/ns/forums/readthread/thread_id/401318/
Mar 12 2011 9:51PM
0 0
profile picture
EricaMN.
Posts: 2704 - Karma: 346
i prefer to naturally detune on rails, just do a ton of pretzels. but you cant really go wrong with any detuning method
Mar 12 2011 11:28PM
0 0
profile picture
BMskier
Posts: 3363 - Karma: 365

not natural because rails are not on real mountains

Mar 12 2011 11:40PM
0 0
profile picture
Caveman.
Posts: 9067 - Karma: 330
Get a file and use it to round the edges underfoot where you will be sliding on the rail. Polish the edge with a gummy stone after filing if you wish. Using just a gummy will take forever and your edges will withstand much more rail abuse if you take the time to detune them before thrashing around on rails.
Mar 13 2011 4:39AM
0 0
profile picture
cultrara
Posts: 5147 - Karma: 46,851
i used a rock and a very fine file and it was perfect
Mar 14 2011 2:40PM
0 0
profile picture
mmallender.
Posts: 5805 - Karma: 936
file is fine, you just have to be more careful, the coarser the file the more you will take off with every pass, and the coarser your end result will be, so you will have to go back over it with something finer like a gummy stone to smooth where you have detuned
Mar 14 2011 3:47PM
0 0
profile picture
Balto
Posts: 25985 - Karma: 4,398
power sander ftw
Mar 14 2011 3:50PM
0 0
profile picture
Yinzer
Posts: 1011 - Karma: 73
just go to walmart and buy a sanding sponge.  they are super cheap and will detune your edges with just a couple passes.  careful not to take too much off 5 or 6 passes will be enough with a 60 grit sponge.
Mar 14 2011 3:51PM
0 0
profile picture
I_Am_Mod
Posts: 13214 - Karma: 3,753
gummy stones and sanding sponges won't do shit to avoid catching edges on rails ....

they're only good to take off the brims from sharpening, real detuning for rails requires a more brutal approach with a file or a simple rock ....

my advice: don't do shit, just be careful on your first day, hit alot of rails and make sure you have a wide stance and are prepared for hooking
Mar 14 2011 3:54PM
0 0
profile picture
monkatizer
Posts: 4704 - Karma: 1,518
a fine metal file or a fine rounded rock, a couple passes should do
Mar 14 2011 3:56PM
0 0
profile picture
Yinzer
Posts: 1011 - Karma: 73

why would you not just sand an edge down a little first?

oblivously your will get crazy rounded from hitting rails eventually but if you want to do the same damage to your teeth when you hit that first rail be my guest.

Mar 14 2011 4:01PM
0 0
profile picture
I_Am_Mod
Posts: 13214 - Karma: 3,753
you're right, i worded incorrectly, sanding is perfectly fine, just a gummystone wont do shit to detune for rails ......
Mar 14 2011 4:17PM
0 0
profile picture
mmallender.
Posts: 5805 - Karma: 936
try long enough and hard enough and it will work, it just takes time before you start to notice any substantial changes.
Mar 14 2011 4:56PM
0 0
profile picture
I_Am_Mod
Posts: 13214 - Karma: 3,753
if you pee long enough on your edges they'll eventually corrode away as well ....
Mar 14 2011 5:31PM
0 0
profile picture
mmallender.
Posts: 5805 - Karma: 936
yeah.....

but a gummy stone works fine if you actually apply force, seeing as i have fully detuned my skis with them before and it didnt take anything more than a reasonable amount of time
Mar 14 2011 5:50PM
0 0
profile picture
Yinzer
Posts: 1011 - Karma: 73
detuning whole edges with my gummy stone shredded it. I prefer to use the gummy just to clean off th edges after I cut them. sanding sponge is second to none.
Mar 14 2011 5:58PM
0 0
profile picture
Mculla11
Posts: 256 - Karma: -11
thanks guys. I actually just ended up borrowing my shops gummy stone on my skis and my friend that knows how to do this shit used it on my edges and i was good.
Mar 14 2011 8:34PM
0 0
All times are Eastern (-4)