Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Boots that dont work with certain bindings

profile picture
rather.be.skiing
Posts: 239 - Karma: 15
so i have last years salomon spk kaos boot (same as this years) and rossi axial 120 binding. ive been having troubles with them falling off for a long while now and i finally found the problem. the heel of my boot bulges out so much that it doesnt let the binding fully snap into place, leaving a small gap between the base of my boot and my bindings brake.

im looking into getting rossi fks bindings but i want to make sure i wont have this same problem. anyone have this combination?

thanks +k
Jan 25 2011 9:58PM
0 0
profile picture
minibus4
Posts: 517 - Karma: 13
Are your heel lugs still in good condition?
Jan 25 2011 10:16PM
0 0
profile picture
rather.be.skiing
Posts: 239 - Karma: 15
ya the boots are basically brand new. its not the heel lug its the actual bulge above the lug for your heel bone that gets in the way and doest allow the heel piece to snap completely into place
Jan 25 2011 10:22PM
0 0
profile picture
.Max.
Posts: 2930 - Karma: 701
Pics? Were your shells blown out?
Jan 25 2011 10:24PM
0 0
profile picture
steezypink21
Posts: 135 - Karma: 17
could be forward pressure on the binding, or a defect in the boot. Are the bindings adjusted correctly?
Jan 25 2011 10:25PM
0 0
profile picture
rather.be.skiing
Posts: 239 - Karma: 15
the forward pressure is adjusted normally and checked by a ski tech and everything. you can see in this picture the is contact between the boots heel and the base of the binding heel piece which causes the heel of the boot not to be held down completely, resulting in a gap under my heel.

Jan 25 2011 10:36PM
0 0
profile picture
rather.be.skiing
Posts: 239 - Karma: 15
http://media.nscdn.com/uploads/cache/images/1296012631-922813-600x450-1296012565IMG00056-20110125-2226.jpg

my bad, this one works
Jan 25 2011 10:37PM
0 0
profile picture
SackTap.
Posts: 621 - Karma: 39
Click for larger image

there ya go
Jan 25 2011 10:56PM
0 0
profile picture
shr@gler
Posts: 1233 - Karma: 912

your dins are probably wrong. I dont see a differntial from boot to binding. the measurements are a standard across the board. tip 1. get sth bindings!  tip 2. have the forward pressure checked again.

tip 3. maybe crank your dins?  I only have had trouble with those bindings. alot more success with salomon or marker. 

Jan 26 2011 12:44AM
0 0
profile picture
simon44
Posts: 1183 - Karma: 1,185
very weird. i know a bunch of people with that combo and it isn't an issue with them. I had the spk and fks combo though and it worked well for me. no complaints. I would take them in to have them looked at
Jan 26 2011 12:56AM
0 0
profile picture
rather.be.skiing
Posts: 239 - Karma: 15
din is at 10 and forward pressure is at the max line. regardless i just want to make sure i wont have a problem like this with the fks
Jan 26 2011 1:01AM
0 0
profile picture
minibus4
Posts: 517 - Karma: 13
See what replacing the break will do
Jan 26 2011 1:02AM
0 0
profile picture
Piste.Off
Posts: 11586 - Karma: 1,861
I'm gonna go ahead and say that your forward pressure is not at max, cause it looks way too low.
Jan 26 2011 1:20AM
0 0
profile picture
Piste.Off
Posts: 11586 - Karma: 1,861
I can't really think of any thing else, post a pic of your boot in the toe too.
Jan 26 2011 1:24AM
0 0
profile picture
rather.be.skiing
Posts: 239 - Karma: 15
i just replaced that brake on sunday. and the forward pressure is at the max line trust me, the toe looks normal.
Jan 26 2011 2:02AM
0 0
All times are Eastern (-4)