Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Changing your own din?

profile picture
whegrodamus.
Posts: 933 - Karma: 12
Hi, I was just wondering if it would be a bad idea to change my din from like a 4 to a 6 or so on my old little skis.

I used them when i was like 5'5 100lbs, I'm now 5'10 130lbs...

Gonna be using them on a little skate rail setup in my front yard i made w/ surplus snow.

Is it ok to do it yourself and not get it pressure checked w/e the other shit is they do at the shops or is it unsafe?
Jan 3 2011 7:44PM
0 0
profile picture
TeamJones
Posts: 629 - Karma: 12
If the chart says you are a six and don't mind taking the risk there is no problem doing it yourself. That said, if you've had the skis for a while it might not be a bad idea to get the bindings checked at a shop. I've had bindings that I adjusted myself, but it did absolutely no good because the bindings were shot. No way for me to confirm that, but the shop did.
Jan 3 2011 7:46PM
0 0
profile picture
whegrodamus.
Posts: 933 - Karma: 12
these things are like brand new used 1 season barely any abuse bc i was just learning to ski on them
Jan 3 2011 7:48PM
0 0
profile picture
RosskillzIT
Posts: 116 - Karma: 29
I do it myself. but I wouldn't gauge on what I do. take it to the shop if you are iffy on it.
Jan 3 2011 7:59PM
0 0
profile picture
MEGAZORD
Posts: 4531 - Karma: -7
Set it to 1000.
Jan 3 2011 8:01PM
0 0
profile picture
RosskillzIT
Posts: 116 - Karma: 29
lolol. try it out.
Jan 3 2011 8:02PM
0 0
profile picture
whegrodamus.
Posts: 933 - Karma: 12
alright ill set din12 bindings to 1000 jus for you k?
Jan 3 2011 8:04PM
0 0
profile picture
onenerdykid
Posts: 6638 - Karma: 10,532
please please read the binding adjustment sticky at the top of the page.
Jan 3 2011 8:08PM
0 0
profile picture
whegrodamus.
Posts: 933 - Karma: 12
...any certified shop techs out there that wanna answer?
Jan 3 2011 8:10PM
0 0
profile picture
MEGAZORD
Posts: 4531 - Karma: -7
I am a certified tech. You gave me little to no information. There is no way to help you.
Jan 3 2011 8:11PM
0 0
profile picture
Balto
Posts: 25985 - Karma: 4,398
if you have to ask, dont do it your self, its really that simple
Jan 3 2011 8:12PM
0 0
profile picture
MEGAZORD
Posts: 4531 - Karma: -7
Just the fact that the binding adjusts down to 4 means you should not touch anything.

Chances are the forward pressure will have to be changed as well, especially if its a marker.

You have probably changed boots since then anyway, so a remount is probably in order.

Jan 3 2011 8:15PM
0 0
All times are Eastern (-4)